Texas Instruments Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
V62/07635-02XE	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		15 mV	1.6 nA	Yes	2		MIL-STD-883	2.4 μA		Tape And Reel	5 V	2/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)	50 pA	12 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LMV7231SQX/NOPB	Texas Instruments	Comparator	Automotive	No Lead	24	HVQCCN	Square				6 mV	15 nA	Yes	6			60 μA		Tape And Reel	3.3 V	3.3 V	Chip Carrier, Heat Sink/Slug, Very Thin Profile	LCC24,.16SQ,20	Comparators	6 V	0.02 in (0.5 mm)	125 °C (257 °F)	5 nA	5.6 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Quad	S-XQCC-N24	1	0.031 in (0.8 mm)	0.157 in (4 mm)	No	e3	30 s	260 °C (500 °F)	0.157 in (4 mm)
TLC3704CPWR	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy	-18 V	6.5 mV	600 pA	Yes	4	CMOS		80 μA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	30 pA	2.7 µs	Push-Pull	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
SM72375MME	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Square		Plastic/Epoxy		13 mV		Yes	1	CMOS					5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	16 V	0.026 in (0.65 mm)	125 °C (257 °F)		10 µs	Open-Drain	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.09 mm)	0.118 in (3 mm)					0.118 in (3 mm)
TLC374INE4	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		7 mV	2 nA	No	4	CMOS		800 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.76 in (19.305 mm)
TL3016CPWG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy	-7 V	3.5 mV	10 uA	Yes	1	BIPOLAR		12.5 mA	-5 V		5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)	10 uA	7.8 µs		0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLC3704CPWLE	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy	-18 V	6.5 mV	600 pA	Yes	4	CMOS		100 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		2.7 µs	Push-Pull	0 °C (32 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No				0.197 in (5 mm)
TLC393QDREP	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	2	CMOS					5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		2.5 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.193 in (4.9 mm)
UA710MJ/883B	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR	MIL-STD-883 Class B (Modified)					12,-6 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TL514MW/883B	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular		Ceramic				Yes		BIPOLAR	MIL-STD-883 Class B (Modified)						Flatpack	FL14,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDFP-F14				No
SM72375MM/NOPB	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Square		Plastic/Epoxy		13 mV		Yes	2	CMOS		25 μA			2.7 V	2.7/15 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	16 V	0.026 in (0.65 mm)	125 °C (257 °F)		10 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
TLV3702QDRG4Q1	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	2		AEC-Q100	1.6 μA		Tape And Reel	5 V	±1.35/±8/2.7/16 V	Small Outline	SOP8,.25	Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 pA	240 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
LMV393QPWRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR	AEC-Q100	250 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No				0.173 in (4.4 mm)
LM119E-SMD	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square	100k Rad(Si)	Ceramic, Metal-Sealed Cofired	-18 V	3.8 mV	475 nA	Yes	2	BIPOLAR	38535Q/M;38534H;883B	11 mA	-15 V	Tube	15 V	±15 V	Chip Carrier	LCC20,.35SQ	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	500 nA	80 ns	Open-Collector	-55 °C (-67 °F)		Quad	S-CQCC-N20	1	0.075 in (1.905 mm)	0.35 in (8.89 mm)	No				0.35 in (8.89 mm)
LMV7255M7	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy		8 mV		Yes	1	BICMOS					2.7 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		730 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)					0.079 in (2 mm)
TL506MW/883B	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular		Ceramic				Yes		BIPOLAR	MIL-STD-883 Class B (Modified)						Flatpack	FL14,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDFP-F14				No
TLC374MN	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		10 mV	20 nA	No	4	CMOS		800 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	20 nA	650 ns	Open-Drain	-55 °C (-67 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.76 in (19.305 mm)
LM2901DBR	Texas Instruments	Comparator	Automotive	Gull Wing	14	SSOP	Rectangular		Plastic/Epoxy	0 V	15 mV	-500 nA	Yes	4	BIPOLAR		2.5 mA	0 V		5 V	5 V	Small Outline, Shrink Pitch	SSOP14,.3	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.079 in (2 mm)	0.209 in (5.3 mm)	No				0.244 in (6.2 mm)
LMC7225IM5X	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy	0 V	8 mV	1 nA	Yes	1	CMOS		1 μA	0 V		2.7 V	2.7/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	10 V	0.038 in (0.953 mm)	85 °C (185 °F)		22 µs	Open-Drain	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.048 in (1.22 mm)	0.063 in (1.6 mm)	No	e0		260 °C (500 °F)	0.114 in (2.9 mm)
5962-8765801PA	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		10 mV	20 nA	No	2	CMOS	MIL-STD-883	300 μA		Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	30 pA	650 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0			0.377 in (9.58 mm)
TLV4082DBVR	Texas Instruments	Comparator	Automotive	Gull Wing	6	LSSOP	Rectangular		Plastic/Epoxy		6 mV	15 nA	Yes	2			12 μA		Tape And Reel	3.3 V		Small Outline, Low Profile, Shrink Pitch	SOP6,.11,38	Comparators	7 V	0.037 in (0.95 mm)	125 °C (257 °F)	15 nA	5.5 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)		e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
TLC193MFKB	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic, Metal-Sealed Cofired		10 mV	30 nA	Yes	2	CMOS		90 μA			5 V	5/10 V	Chip Carrier	LCC20,.35SQ	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		2.5 µs	Open-Drain	-55 °C (-67 °F)		Quad	S-CQCC-N20		0.08 in (2.03 mm)	0.35 in (8.89 mm)	No				0.35 in (8.89 mm)
TLC3702CPE4	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	No	2	CMOS		50 μA			5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	600 pA	2.7 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.386 in (9.81 mm)
LM311Y	Texas Instruments	Comparator	Commercial	No Lead	8	DIE				-18 V	10 mV	300 nA	Yes	1	BIPOLAR			-15 V		15 V		Uncased Chip		Comparators	18 V		70 °C (158 °F)		115 ns	Open-Collector, Open-Emitter	0 °C (32 °F)		Upper	X-XUUC-N				No
LM306DG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-15 V	6.5 mV	40 uA	Yes	1	BIPOLAR		10 mA	-12 V		12 V	12,-3/-12 V	Small Outline	SOP8,.25	Comparators	15 V	0.05 in (1.27 mm)	70 °C (158 °F)	40 uA	28 ns	Totem Pole	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LP365N	Texas Instruments	Comparator	Commercial	Through-Hole	16	DIP	Rectangular		Plastic/Epoxy	-18 V	9 mV	800 nA	No	4	BIPOLAR			-15 V		15 V		In-Line		Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)		1 µs	Open-Collector	0 °C (32 °F)		Dual	R-PDIP-T16		0.2 in (5.08 mm)	0.3 in (7.62 mm)					0.856 in (21.755 mm)
TL710MU	Texas Instruments	Comparator	Military	Flat	10	DFP	Rectangular		Ceramic				Yes		BIPOLAR							Flatpack	FL10,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDFP-F10				No
SN52510J	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
LMV7291MG/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy	0 V	6 mV	100 nA	Yes	1	BICMOS		14 μA	0 V	Tape And Reel	1.8 V	1.8/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	100 nA	1.8 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	e3		260 °C (500 °F)	0.079 in (2 mm)
5962R9679801VHX	Texas Instruments	Comparator	Military	Gull Wing	10	SOP	Rectangular		Ceramic, Glass-Sealed		6.8 mV	950 nA	Yes	2		MIL-STD-883				5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)		80 ns	Open-Collector	-55 °C (-67 °F)		Dual	R-GDSO-G10		0.08 in (2.032 mm)	0.241 in (6.12 mm)	Yes
TLV3704CPWR	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	4	CMOS		4 μA	0 V		2.7 V	±1.25/±8/2.5/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	17 V	0.026 in (0.65 mm)	70 °C (158 °F)	250 pA	240 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4			0.197 in (5 mm)
5962-9153201QHX	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		10 mV	30 nA	No	2	CMOS	MIL-PRF-38535 Class Q				5 V		In-Line		Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		2.7 µs	Push-Pull	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.377 in (9.58 mm)
LM306JG4	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic				No	1	BIPOLAR						12,-3/-12 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T8
TLC374CDP3	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		6.5 mV		Yes		CMOS		800 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)	600 pA	650 ns		0 °C (32 °F)		Dual	R-PDSO-G14
TLC393IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		5 mV	2 nA	Yes	2	CMOS		40 μA		Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
5962-9153201QPX	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		10 mV	30 nA	No	2	CMOS	MIL-PRF-38535 Class Q	90 μA			5 V		In-Line		Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		2.7 µs	Push-Pull	-55 °C (-67 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes				0.378 in (9.6 mm)
LMV762QMMX/NOPB	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		1 mV	5 pA	Yes	2	CMOS	AEC-Q100	1.4 mA		Tape And Reel		2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators		0.026 in (0.65 mm)	125 °C (257 °F)	5 pA	120 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.042 in (1.07 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
LM306DR	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-15 V	6.5 mV	40 uA	Yes	1	BIPOLAR			-12 V		12 V	12,-3/-12 V	Small Outline	SOP8,.25	Comparators	15 V	0.05 in (1.27 mm)	70 °C (158 °F)		28 ns	Totem Pole	0 °C (32 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
JM38510/10304BCA	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	-30 V	3 mV	100 pA	No	1	BIPOLAR	MIL-M-38510 Class B	7 mA	-15 V		15 V		In-Line		Comparators	30 V	0.1 in (2.54 mm)	125 °C (257 °F)		640 ns	Open-Collector	-55 °C (-67 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.785 in (19.94 mm)
LMV7275MF	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy	0 V	4 mV	100 nA	Yes	1	BICMOS		14 μA	0 V	Tape And Reel	1.8 V	1.8/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	5.5 V	0.037 in (0.95 mm)	85 °C (185 °F)	100 nA	1.8 µs	Open-Collector	-40 °C (-40 °F)	Tin/Lead	Dual	R-PDSO-G5	1	0.048 in (1.22 mm)	0.063 in (1.6 mm)	No	e0		260 °C (500 °F)	0.115 in (2.92 mm)
LT1011MJG	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed	-18 V	3 mV	80 nA	No	1	BIPOLAR		4 mA	-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	50 nA	150 ns		-55 °C (-67 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)
TLV1391IDBVTE4	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	1	BIPOLAR		150 μA			3 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	85 °C (185 °F)	250 nA	700 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
LM361H	Texas Instruments	Comparator	Commercial	Wire	10		Round		Metal	-16 V	5 mV	30 pA	No	1	BIPOLAR			-10 V		10 V	5,±10 V	Cylindrical	CAN10,.23	Comparators	16 V		70 °C (158 °F)	30 pA	14 ns	Totem Pole	0 °C (32 °F)		Bottom	O-MBCY-W10	1			No
TL331CJGP4	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic				No		BIPOLAR						5/30 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T8
LM139AW/883B	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular		Ceramic		4 mV		Yes	4	BIPOLAR	MIL-STD-883 Class B (Modified)	2 mA			5 V	5 V	Flatpack	FL14,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)		1.3 µs		-55 °C (-67 °F)		Dual	R-XDFP-F14				No
5962R9679802VXA	Texas Instruments	Comparator	Military	Gull Wing	10	SOP	Rectangular	100k Rad(Si)	Ceramic, Glass-Sealed	-18 V	4 mV	-1 nA	Yes	4	BIPOLAR	MIL-PRF-38535 Class V	11 mA	-15 V		5 V		Small Outline		Comparators	36 V		125 °C (257 °F)	500 nA	5 µs	Open-Collector	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDSO-G10	1			Yes	e0
LM111JG	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed	-18 V	4 mV	150 nA	No	1	BIPOLAR		6 mA	-15 V	Tube	15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 nA	115 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.377 in (9.58 mm)
TL3116Y	Texas Instruments	Comparator	Commercial	No Lead	8	DIE	Rectangular			-7 V	3.5 mV	1.2 uA	Yes	1				-5 V		5 V		Uncased Chip			7 V		70 °C (158 °F)		9.9 ns		0 °C (32 °F)	Nickel Palladium Gold	Upper	R-XUUC-N8				No	e4

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.