Texas Instruments Comparators 2,400+

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TLV7256IDCTT	Texas Instruments	Comparator	Industrial	Gull Wing	8	LSSOP	Rectangular	Plastic/Epoxy		9 mV		Yes	2	CMOS					1.8 V		Small Outline, Low Profile, Shrink Pitch		Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)		30 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.051 in (1.3 mm)	0.11 in (2.8 mm)	No				0.116 in (2.95 mm)
TL712CD	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		5 mV	600 uA	Yes	1	BIPOLAR		20 mA		Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	600 uA	25 ns	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC393CJG	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed		6.5 mV	600 pA	No	2	CMOS		50 μA			5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	600 pA	1.1 µs	Open-Drain	0 °C (32 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)
TLC393CPSRG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS		50 μA			5 V	5 V	Small Outline	SOP8,.3	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)		2.5 µs	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4	30 s	260 °C (500 °F)	0.244 in (6.2 mm)
TLC193MJG	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular	Ceramic, Glass-Sealed		10 mV	30 nA	No	2	CMOS		90 μA			5 V	5/10 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		2.5 µs	Open-Drain	-55 °C (-67 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.377 in (9.58 mm)
LMV339QPWR	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	4	BIPOLAR		200 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No				0.197 in (5 mm)
LM339J4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Ceramic		9 mV		No		BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		1.3 µs		0 °C (32 °F)		Dual	R-XDIP-T14
LMC6772QMM/NOPB	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Square	Plastic/Epoxy		10 mV	0.4 pA	Yes	2	CMOS	AEC-Q100	20 μA		Tape And Reel	2.7 V	2.7/15 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	16 V	0.026 in (0.65 mm)	125 °C (257 °F)	0.4 pA	5 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
5962R9673801VDX	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular	Ceramic, Glass-Sealed	0 V	4 mV	-1 nA	Yes	4	BIPOLAR	MIL-PRF-38535 Class V		0 V		5 V		Flatpack		Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-55 °C (-67 °F)		Dual	R-GDFP-F14		0.08 in (2.032 mm)	0.25 in (6.35 mm)	Yes
LP339N-N	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		9 mV		No	4	BIPOLAR		100 μA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	25 nA	8 µs		0 °C (32 °F)		Dual	R-PDIP-T14				No
LM2901QPWRG4Q1	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		15 mV	-500 nA	Yes	4	BIPOLAR	AEC-Q100	2.5 mA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	-250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
LM139W/883	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular	Ceramic, Glass-Sealed		5 mV	100 uA	Yes	1						5 V		Flatpack		Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)		1.3 µs		-55 °C (-67 °F)		Dual	R-GDFP-F14		0.08 in (2.032 mm)	0.248 in (6.2865 mm)					0.385 in (9.779 mm)
LM339AJ	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Ceramic, Glass-Sealed		4 mV	-400 nA	No	4	BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)		1.3 µs	Open-Collector	0 °C (32 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.77 in (19.56 mm)
LM339AN/PB	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Plastic/Epoxy		4 mV	400 nA	No	4	BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.755 in (19.18 mm)
TLV2354IPWR	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		5 mV	2 nA	Yes	4	CMOS		600 μA		Tape And Reel	3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	8 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 nA	640 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
UA711CU	Texas Instruments	Comparator	Commercial	Flat	10	DFP	Rectangular	Ceramic				Yes	2	BIPOLAR						12,-6 V	Flatpack	FL10,.3	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDFP-F10				No
LM139AW-SMD	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular	Ceramic, Glass-Sealed	0 V	2 mV	-1 nA	Yes	4	BIPOLAR	MIL-STD-883	2 mA	0 V	Tube	5 V	5 V	Flatpack	FL14,.3	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA	5 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-GDFP-F14	1	0.08 in (2.02 mm)	0.25 in (6.35 mm)	No	e0			0.39 in (9.906 mm)
5962-01-009-7763	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	Ceramic		4 mV		No		BIPOLAR	MIL-STD-883 Class B (Modified)		-15 V		15 V	±15 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TL331MDBVREP	Texas Instruments	Comparator	Military	Gull Wing	5	LSSOP	Rectangular	Plastic/Epoxy		9 mV	-400 nA	Yes	1	BIPOLAR		700 μA			5 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	36 V	0.037 in (0.95 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)		e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
LMV339IDRE4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		9 mV	400 nA	Yes	4	BIPOLAR		350 μA			5 V	3/5 V	Small Outline	SOP14,.25	Comparators	5.5 V	0.05 in (1.27 mm)	85 °C (185 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LM2901QPWRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular	Plastic/Epoxy		15 mV	-500 nA	Yes	4	BIPOLAR	AEC-Q100	2.5 mA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	125 °C (257 °F)	-250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
LM261J	Texas Instruments	Comparator	Other						-16 V	3 mV	20 uA		1	BIPOLAR			-10 V		10 V				Comparators	16 V		85 °C (185 °F)			Totem Pole	-25 °C (-13 °F)	Tin Lead						No	e0
LM111MD8	Texas Instruments	Comparator	Military	No Lead		DIE			-18 V	3 mV	150 nA	Yes	1	BIPOLAR		6 mA	-15 V		15 V		Uncased Chip		Comparators	18 V		125 °C (257 °F)	100 nA	200 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)		Upper	X-XUUC-N	1			No		40	260 °C (500 °F)
TLC3704CDRG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	-18 V	6.5 mV	600 pA	Yes	4	CMOS		100 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	600 pA	2.7 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LMP7300MM/NOPB	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular	Plastic/Epoxy		750 uV	3 nA	Yes	1			16 μA		Tape And Reel		2.7/12 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators		0.026 in (0.65 mm)	125 °C (257 °F)	3 nA	7.7 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.042 in (1.07 mm)	0.118 in (3 mm)	No	e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
TLC372MUB	Texas Instruments	Comparator	Military	Flat	10	DFP	Rectangular	Ceramic, Glass-Sealed		10 mV	20 nA	Yes	2	CMOS	MIL-STD-883	300 μA		Tube	5 V	5 V	Flatpack	FL10,.24	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	650 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-GDFP-F10		0.08 in (2.03 mm)	0.245 in (6.225 mm)	No	e0			0.255 in (6.475 mm)
LMC7221MWC	Texas Instruments	Comparator	Industrial	No Lead		DIE			0 V		1 pA	Yes	1	CMOS			0 V		5 V		Uncased Chip		Comparators	16 V		85 °C (185 °F)		4 µs	Open-Drain	-40 °C (-40 °F)		Upper	X-XUUC-N				No
LMV7251M5	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular	Plastic/Epoxy		8 mV		Yes	1	BICMOS					2.7 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	5.5 V	0.037 in (0.95 mm)	85 °C (185 °F)		730 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)					0.114 in (2.9 mm)
TLV3402CDGKG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Square	Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	2			950 nA	0 V		2.7 V	±1.25/±8/2.5/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	17 V	0.026 in (0.65 mm)	70 °C (158 °F)	250 pA	175 µs	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.118 in (3 mm)
TLC374MDG4	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		10 mV	20 nA	Yes	4	CMOS		600 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	650 ns	Open-Collector	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
TL810CP	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy				No		BIPOLAR							In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8				No
TLC374IJ	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular	Ceramic, Glass-Sealed		7 mV	2 nA	No	4	CMOS		800 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.77 in (19.56 mm)
TL331IP	Texas Instruments	Comparator	Other	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy	0 V	9 mV	-300 nA	No	1	BIPOLAR		800 μA	0 V		5 V	5/30 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	85 °C (185 °F)		1.3 µs	Open-Collector	-25 °C (-13 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.386 in (9.81 mm)
TLC339MD	Texas Instruments	Comparator	Military	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		10 mV	30 nA	Yes	4	CMOS		80 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	2 pA	2.5 µs	Open-Collector	-55 °C (-67 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
UC161CN	Texas Instruments	Comparator	Commercial	Through-Hole	16	DIP	Rectangular	Plastic/Epoxy				No	4	BIPOLAR							In-Line	DIP16,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T16				No
5962-9688201QDA	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular	Ceramic, Glass-Sealed		5 mV	20 nA	Yes	4	CMOS	MIL-PRF-38535 Class Q	600 μA		Tube	3 V	3/5 V	Flatpack	FL14,.3	Comparators	8 V	0.05 in (1.27 mm)	125 °C (257 °F)	20 nA	1.4 µs	Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-GDFP-F14		0.08 in (2.03 mm)	0.248 in (6.29 mm)	Yes	e0			0.363 in (9.21 mm)
LM6511MDA	Texas Instruments	Comparator	Industrial	No Lead		DIE				5 mV	130 nA	Yes	1	BIPOLAR					2.7 V		Uncased Chip		Comparators	36 V		85 °C (185 °F)		180 ns	Open-Collector	-40 °C (-40 °F)		Upper	X-XUUC-N				No
TLC374CDB	Texas Instruments	Comparator	Commercial	Gull Wing	14	SSOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS					5 V		Small Outline, Shrink Pitch		Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		650 ns	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	2	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4			0.244 in (6.2 mm)
TL710CJ4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular	Ceramic				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14
TLV3704IDRG4	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	4	CMOS		3.2 μA	0 V	Tape And Reel	5 V	±1.35/±8/2.7/16 V	Small Outline	SOP14,.25	Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 pA	240 µs	Push-Pull	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLC393MP	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy		10 mV	30 nA	No	2	CMOS		90 μA			5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	30 nA	2.5 µs	Open-Drain	-55 °C (-67 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.386 in (9.81 mm)
5962-01-066-3841	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	Ceramic		9 mV		No		BIPOLAR	MIL-STD-883 Class B (Modified)	2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)		1.3 µs		-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TL510CPP3	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular	Plastic/Epoxy				No		BIPOLAR							In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8
TLC354Y	Texas Instruments	Comparator	Commercial	No Lead	14	DIE	Rectangular			5 mV		Yes	4	CMOS					5 V		Uncased Chip		Comparators	18 V		70 °C (158 °F)		650 ns	Open-Drain	0 °C (32 °F)		Upper	R-XUUC-N14				No
TLV2352MU	Texas Instruments	Comparator	Military	Flat	10	DFP	Square	Ceramic, Glass-Sealed		10 mV	20 nA	Yes	2	CMOS		400 μA			3 V	3/5 V	Flatpack	DIP8,.3	Comparators	8 V	0.05 in (1.27 mm)	125 °C (257 °F)	20 nA	1.4 µs	Open-Drain	-55 °C (-67 °F)		Dual	S-GDFP-F10		0.08 in (2.03 mm)	0.245 in (6.225 mm)	No				0.245 in (6.225 mm)
5962-9555101NXD	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular	Ceramic, Metal-Sealed Cofired		5 mV	30 nA	Yes	2	CMOS	MIL-PRF-38535 Class N	40 μA		Tape And Reel	5 V	4/16 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	1 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-CDSO-G8	1	0.077 in (1.96 mm)	0.154 in (3.9 mm)	Yes	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
SN52810J	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	Ceramic				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TLC3704CNS	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular	Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS					5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)		2.7 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4	30 s	260 °C (500 °F)	0.402 in (10.2 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.