Comparators

Reset All
Part RoHS Manufacturer Amplifier Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material Nominal Unity Gain Bandwidth Maximum Negative Supply Voltage Limit Maximum Input Offset Voltage Maximum Average Bias Current (IIB) Surface Mount No. of Functions Minimum Common Mode Reject Ratio Technology Screening Level Nominal Common Mode Reject Ratio Maximum Supply Current Nominal Negative Supply Voltage (Vsup) Minimum Isolation Voltage Packing Method Nominal Supply Voltage / Vsup (V) Power Supplies (V) Package Style (Meter) Package Equivalence Code Sub-Category Nominal Slow Rate Maximum Supply Voltage Limit Terminal Pitch Maximum Operating Temperature Maximum Bias Current (IIB) @25C Maximum Common Mode Voltage Nominal Response Time Output Type Minimum Operating Temperature Terminal Finish Terminal Position JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Nominal Bandwidth (3dB) JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length

LM211J-8

National Semiconductor

Comparator

Other

Through-Hole

8

DIP

Rectangular

Ceramic, Glass-Sealed

-18 V

4 mV

150 nA

No

1

BIPOLAR

-15 V

15 V

±15 V

In-Line

DIP8,.3

Comparators

18 V

0.1 in (2.54 mm)

85 °C (185 °F)

100 nA

200 ns

Open-Collector

-25 °C (-13 °F)

Tin Lead

Dual

R-GDIP-T8

1

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e0

40

260 °C (500 °F)

0.38 in (9.652 mm)

LM211J8

Motorola

Comparator

Other

Through-Hole

8

DIP

Rectangular

Ceramic

4 mV

No

1

BIPOLAR

-15 V

15 V

±15 V

In-Line

DIP8,.3

Comparators

0.1 in (2.54 mm)

85 °C (185 °F)

-25 °C (-13 °F)

Tin/Lead

Dual

R-XDIP-T8

No

e0

LM2903FVT-E2

ROHM

Comparator

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

5 mV

500 nA

Yes

2

1.5 mA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

125 °C (257 °F)

250 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.047 in (1.2 mm)

0.118 in (3 mm)

0.173 in (4.4 mm)

LM3302M96

Intersil

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

40 mV

1 uA

Yes

4

BIPOLAR

0 V

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

85 °C (185 °F)

1.3 µs

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G14

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.341 in (8.65 mm)

LM393FV-E2

ROHM

Comparator

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

5 mV

500 nA

Yes

2

1.5 mA

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

SSOP8,.25

Comparators

36 V

0.026 in (0.65 mm)

85 °C (185 °F)

250 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Dual

R-PDSO-G8

0.053 in (1.35 mm)

0.118 in (3 mm)

0.173 in (4.4 mm)

LM393FVJ-E2

ROHM

Comparator

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

5 mV

500 nA

Yes

2

1.5 mA

Tape And Reel

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Comparators

36 V

0.026 in (0.65 mm)

85 °C (185 °F)

250 nA

1 µs

Open-Collector

-40 °C (-40 °F)

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

0.118 in (3 mm)

LM393N-A

Philips Semiconductors

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

9 mV

No

2

BIPOLAR

5 V

5 V

In-Line

DIP8,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Tin/Lead

Dual

R-PDIP-T8

No

e0

LM393N/A+

National Semiconductor

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

9 mV

No

2

BIPOLAR

5 V

5 V

In-Line

DIP8,.3

Comparators

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Tin/Lead

Dual

R-PDIP-T8

e0

LM7211BIM5X

National Semiconductor

Comparator

Industrial

Gull Wing

5

SOP

Rectangular

Plastic/Epoxy

18 mV

Yes

1

CMOS

2.7 V

Small Outline

16 V

85 °C (185 °F)

8 µs

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G5

No

MC3302P

Onsemi

Comparator

Industrial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

0 V

40 mV

1 uA

No

4

BIPOLAR

0 V

5 V

5 V

In-Line

DIP14,.3

Comparators

30 V

0.1 in (2.54 mm)

85 °C (185 °F)

1.3 µs

Open-Collector

-40 °C (-40 °F)

Tin/Lead

Dual

R-PDIP-T14

0.185 in (4.69 mm)

0.3 in (7.62 mm)

No

e0

30 s

235 °C (455 °F)

0.743 in (18.86 mm)

TA75393F

Toshiba

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

0 V

5 mV

250 nA

Yes

2

BIPOLAR

2 mA

0 V

5 V

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G8

0.075 in (1.9 mm)

0.173 in (4.4 mm)

No

e0

0.197 in (5 mm)

TC75S56FU(TE85L,F)

Toshiba

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

7 mV

Yes

1

CMOS

22 μA

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

0.025 in (0.635 mm)

85 °C (185 °F)

60 ns

-40 °C (-40 °F)

Dual

R-PDSO-G5

No

TC75S57FU(TE85L,F)

Toshiba

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

7 mV

Yes

1

CMOS

220 μA

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

0.025 in (0.635 mm)

85 °C (185 °F)

11 ns

-40 °C (-40 °F)

Dual

R-PDSO-G5

No

30 s

260 °C (500 °F)

TC75W57FU,LF

Toshiba

Comparator

Comparators

TC75W59FK(TE85L,F)

Toshiba

Comparator

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

7 mV

Yes

2

CMOS

440 μA

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.12,20

Comparators

0.02 in (0.5 mm)

85 °C (185 °F)

170 ns

-40 °C (-40 °F)

Dual

R-PDSO-G8

No

TS9001-1IJ5T

Silicon Labs

Comparator

Industrial

Gull Wing

5

VSSOP

Rectangular

Plastic/Epoxy

10 mV

2 nA

Yes

1

5 V

Small Outline, Very Thin Profile, Shrink Pitch

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

5 µs

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.039 in (1 mm)

0.049 in (1.25 mm)

0.079 in (2 mm)

UA710HC

National Semiconductor

Comparator

Commercial

Wire

8

Round

Metal

BIPOLAR

12,-6 V

Cylindrical

CAN8,.2

Comparators

70 °C (158 °F)

0 °C (32 °F)

Tin/Lead

Bottom

O-MBCY-W8

No

e0

5962-87739012X

Texas Instruments

Comparator

Military

No Lead

20

QCCN

Square

Ceramic, Metal-Sealed Cofired

0 V

4 mV

-300 nA

Yes

4

BIPOLAR

MIL-STD-883

3 mA

0 V

5 V

Chip Carrier

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

1.3 µs

Open-Collector

-55 °C (-67 °F)

Quad

S-CQCC-N20

0.08 in (2.03 mm)

0.35 in (8.89 mm)

Yes

0.35 in (8.89 mm)

AD8465WBCPZ-WP

Analog Devices

Comparator

Automotive

No Lead

12

HVQCCN

Square

5 mV

5 uA

Yes

1

AEC-Q100

3 mA

2.5 V

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC12,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

5 uA

1.6 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N12

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

ADCMP354YKSZ-REEL7

Analog Devices

Comparator

Automotive

Gull Wing

4

TSSOP

Rectangular

Plastic/Epoxy

Yes

1

15 μA

Tape And Reel, 7 Inch

3.3 V

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

SOT-343R

Comparators

6 V

125 °C (257 °F)

30 ns

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G4

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

260 °C (500 °F)

0.079 in (2 mm)

ADCMP565BP

Analog Devices

Comparator

Industrial

J Bend

20

QCCJ

Square

Plastic/Epoxy

-6 V

6 mV

40 uA

Yes

2

BIPOLAR

-5.2 V

5 V

5,-5.2 V

Chip Carrier

LDCC20,.4SQ

Comparators

6 V

0.05 in (1.27 mm)

85 °C (185 °F)

40 uA

0.375 ns

Open-Emitter

-40 °C (-40 °F)

Tin Lead

Quad

S-PQCC-J20

1

0.18 in (4.57 mm)

0.353 in (8.965 mm)

No

e0

225 °C (437 °F)

0.353 in (8.965 mm)

ADCMP567BCPZ

Analog Devices

Comparator

Industrial

No Lead

32

HVQCCN

Square

-6 V

5 mV

42 uA

Yes

2

20 mA

-5.2 V

5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC32,.2SQ,20

Comparators

6 V

0.02 in (0.5 mm)

85 °C (185 °F)

42 uA

0.3 ns

Open-Emitter

-40 °C (-40 °F)

Matte Tin - annealed

Quad

S-XQCC-N32

3

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADCMP582BCPZ-RL7

Analog Devices

Comparator

Automotive

No Lead

16

HVQCCN

Square

-6 V

10 mV

30 uA

Yes

1

BIPOLAR

8 mA

-5 V

5 V

±5,3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

6 V

0.02 in (0.5 mm)

125 °C (257 °F)

30 uA

0.18 ns

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N16

3

0.035 in (0.9 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

CMP01CP

Analog Devices

Comparator

Commercial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

-18 V

3.5 mV

900 nA

No

1

BIPOLAR

8.5 mA

-15 V

15 V

5/±15 V

In-Line

DIP8,.3

Comparators

18 V

0.1 in (2.54 mm)

70 °C (158 °F)

900 nA

110 ns

Totem Pole

0 °C (32 °F)

Tin Lead

Dual

R-PDIP-T8

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

e0

0.389 in (9.88 mm)

CMP04FSZ

Analog Devices

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

0 V

2 mV

200 nA

Yes

4

BIPOLAR

3 mA

0 V

5 V

5 V

Small Outline

SOP14,.25

Comparators

36 V

0.05 in (1.27 mm)

85 °C (185 °F)

100 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

260 °C (500 °F)

0.341 in (8.65 mm)

HMC674LC3CTR

Analog Devices

Comparator

Industrial

No Lead

16

HVQCCN

Square

Ceramic, Metal-Sealed Cofired

-3.3 V

Yes

1

-3 V

Tape And Reel

3.3 V

-3,3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC16,.12SQ,20

Comparators

4 V

0.02 in (0.5 mm)

85 °C (185 °F)

0.085 ns

-40 °C (-40 °F)

Quad

S-CQCC-N16

0.036 in (0.92 mm)

0.114 in (2.9 mm)

No

0.114 in (2.9 mm)

LM139AE/883

Texas Instruments

Comparator

Military

No Lead

20

QCCN

Square

Ceramic, Metal-Sealed Cofired

0 V

2 mV

-1 nA

Yes

4

BIPOLAR

MIL-STD-883

2 mA

0 V

Tube

5 V

5 V

Chip Carrier

LCC20,.35SQ

Comparators

36 V

0.05 in (1.27 mm)

125 °C (257 °F)

100 nA

5 µs

Open-Collector, Open-Drain

-55 °C (-67 °F)

Quad

S-CQCC-N20

1

0.075 in (1.91 mm)

0.35 in (8.89 mm)

No

0.35 in (8.89 mm)

LT1671CMS8#PBF

Analog Devices

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-7 V

4 mV

350 nA

Yes

1

-5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

7 V

0.026 in (0.65 mm)

70 °C (158 °F)

85 ns

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LT1713CMS8#PBF

Analog Devices

Comparator

Commercial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

-6.3 V

4 mV

5 uA

Yes

1

-5 V

5 V

Small Outline, Thin Profile, Shrink Pitch

Comparators

6.3 V

0.026 in (0.65 mm)

70 °C (158 °F)

8.5 ns

0 °C (32 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC1440IS8#TRPBF

Analog Devices

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

-0.3 V

10 mV

Yes

1

CMOS

0 V

Tape And Reel

3 V

Small Outline

Comparators

12 V

0.05 in (1.27 mm)

85 °C (185 °F)

14 µs

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.752 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9025 mm)

LTC1843IS8#PBF

Analog Devices

Comparator

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

Yes

2

CMOS

3 V

Small Outline

Comparators

0.05 in (1.27 mm)

85 °C (185 °F)

5 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

MAX9140EXK-T

Maxim Integrated

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

4.5 mV

320 nA

Yes

1

BIPOLAR

300 μA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

320 nA

-40 °C (-40 °F)

Tin Lead

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e0

0.079 in (2 mm)

MAX9140EXK+T

Analog Devices

Comparator

Industrial

Gull Wing

5

TSSOP

Rectangular

Plastic/Epoxy

4.5 mV

320 nA

Yes

1

BIPOLAR

300 μA

5 V

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP5/6,.08

Comparators

6 V

0.026 in (0.65 mm)

85 °C (185 °F)

320 nA

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.049 in (1.25 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

MCP6544-I/SL

Microchip Technology

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

7 mV

100 pA

Yes

4

CMOS

4 μA

Tube

5 V

1.6/5.5 V

Small Outline

SOP14,.25

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

40

260 °C (500 °F)

0.341 in (8.65 mm)

MCP6544-I/ST

Microchip Technology

Comparator

Industrial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

7 mV

100 pA

Yes

4

CMOS

4 μA

Tube

5 V

1.6/5.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

7 V

0.026 in (0.65 mm)

85 °C (185 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

40

260 °C (500 °F)

0.197 in (5 mm)

MCP6544T-I/SL

Microchip Technology

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

7 mV

100 pA

Yes

4

CMOS

4 μA

Tape And Reel

5 V

1.6/5.5 V

Small Outline

SOP14,.25

Comparators

7 V

0.05 in (1.27 mm)

85 °C (185 °F)

4 µs

Push-Pull

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

40

260 °C (500 °F)

0.341 in (8.65 mm)

MCP6546UT-E/OT

Microchip Technology

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

7 mV

5 nA

Yes

1

CMOS

TS 16949

1 μA

Tape And Reel

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP5/6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

3 µs

Open-Drain

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.061 in (1.55 mm)

e3

260 °C (500 °F)

0.114 in (2.9 mm)

MCP65R46T-1202E/CHY

Microchip Technology

Comparator

Automotive

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

10 mV

5 nA

Yes

1

CMOS

TS 16949

4 μA

Tape And Reel

5 V

2/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

125 °C (257 °F)

4 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.061 in (1.55 mm)

No

e4

40

260 °C (500 °F)

0.114 in (2.9 mm)

MIC833YM5-TR

Microchip Technology

Comparator

Industrial

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

Yes

1

2 μA

Tape And Reel

1.6 V

Small Outline, Low Profile, Shrink Pitch

SOP5/6,.11,37

Comparators

7 V

0.037 in (0.95 mm)

85 °C (185 °F)

5 µs

Open-Drain

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G5

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

e4

260 °C (500 °F)

0.114 in (2.9 mm)

TL331SN4T3G

Onsemi

Comparator

Automotive

Gull Wing

5

TSOP

Rectangular

Plastic/Epoxy

9 mV

400 nA

Yes

1

AEC-Q100

1.25 mA

Tape And Reel

5 V

Small Outline, Thin Profile

TSOP5/6,.11,37

Comparators

36 V

0.037 in (0.95 mm)

125 °C (257 °F)

250 nA

850 ns

Open-Collector

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G5

1

0.043 in (1.1 mm)

0.059 in (1.5 mm)

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLC339ID

Texas Instruments

Comparator

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

7 mV

2 nA

Yes

4

CMOS

80 μA

Tube

5 V

5 V

Small Outline

SOP14,.25

Comparators

18 V

0.05 in (1.27 mm)

85 °C (185 °F)

2 pA

2.5 µs

Open-Collector

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

260 °C (500 °F)

0.341 in (8.65 mm)

TLC3702MD

Texas Instruments

Comparator

Military

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

30 nA

Yes

2

CMOS

40 μA

Tube

5 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

30 pA

2.7 µs

Push-Pull

-55 °C (-67 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLC3702MDG4

Texas Instruments

Comparator

Military

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

30 nA

Yes

2

CMOS

40 μA

Tube

5 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

30 pA

2.7 µs

Push-Pull

-55 °C (-67 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLC3702MDR

Texas Instruments

Comparator

Military

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

10 mV

30 nA

Yes

2

CMOS

40 μA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

30 pA

2.7 µs

Push-Pull

-55 °C (-67 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV3404IPW

Texas Instruments

Comparator

Automotive

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

0 V

4.4 mV

1.5 nA

Yes

4

2.56 μA

0 V

Tube

5 V

±1.35/±8/2.7/16 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Comparators

17 V

0.026 in (0.65 mm)

125 °C (257 °F)

100 pA

175 µs

Open-Drain

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

260 °C (500 °F)

0.197 in (5 mm)

TS881ILT

STMicroelectronics

Comparator

Automotive

Gull Wing

5

LSSOP

Rectangular

Plastic/Epoxy

6 mV

100 pA

Yes

1

Tape And Reel

1.2 V

Small Outline, Low Profile, Shrink Pitch

Comparators

5.5 V

0.037 in (0.95 mm)

125 °C (257 °F)

6 µs

Push-Pull

-40 °C (-40 °F)

Dual

R-PDSO-G5

0.057 in (1.45 mm)

0.063 in (1.6 mm)

0.114 in (2.9 mm)

UPC277G2-E1-A

Renesas Electronics

Comparator

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

5 mV

250 nA

Yes

1

BIPOLAR

1 mA

5 V

Small Outline

SOP8,.25

Comparators

36 V

0.05 in (1.27 mm)

85 °C (185 °F)

250 nA

1.3 µs

Open-Collector

-40 °C (-40 °F)

Tin Bismuth

Dual

R-PDSO-G8

0.071 in (1.8 mm)

0.173 in (4.4 mm)

e6

0.205 in (5.2 mm)

TLC393QDR

Texas Instruments

Comparator

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

5 mV

30 nA

Yes

2

CMOS

40 μA

Tape And Reel

5 V

5 V

Small Outline

SOP8,.25

Comparators

18 V

0.05 in (1.27 mm)

125 °C (257 °F)

2 pA

2.5 µs

Open-Collector

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.