Comparators

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Minimum Isolation Voltage	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TL331ID	Texas Instruments	Comparator	Other	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	9 mV	-300 nA	Yes	1	BIPOLAR		800 μA	0 V			5 V	5/30 V	Small Outline	SOP8,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)		1.3 µs	Open-Collector	-25 °C (-13 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
SM72375MM	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Square		Plastic/Epoxy		13 mV		Yes	1	CMOS						5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	16 V	0.026 in (0.65 mm)	125 °C (257 °F)		10 µs	Open-Drain	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.09 mm)	0.118 in (3 mm)					0.118 in (3 mm)
TLC371CD	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	1	CMOS		200 μA				5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	600 pA	650 ns	Open-Drain	0 °C (32 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TLC354MJ	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed		12 mV	20 nA	No	4	CMOS		800 μA				5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	20 nA	650 ns	Open-Drain	-55 °C (-67 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.77 in (19.56 mm)
TLV3702CDGK	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Square		Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	2	CMOS		1.6 μA	0 V		Tube	2.7 V	±1.25/±8/2.5/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	17 V	0.026 in (0.65 mm)	70 °C (158 °F)	100 pA	240 µs	Push-Pull	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)	No	e4		260 °C (500 °F)	0.118 in (3 mm)
LM193FH/883B	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic		9 mV		Yes		BIPOLAR	MIL-STD-883 Class B (Modified)					5 V	5 V	Chip Carrier	LCC20,.35SQ	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Quad	S-XQCC-N20				No
TL811MJ	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR								In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TL721CP	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR								In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8				No
LM306L	Texas Instruments	Comparator	Commercial	Wire	8		Round		Metal					1	BIPOLAR							12,-3/-12 V	Cylindrical	CAN8,.2	Comparators			70 °C (158 °F)				0 °C (32 °F)		Bottom	O-MBCY-W8				No
SN52711S	Texas Instruments	Comparator	Military	Flat	10	DFP	Rectangular		Ceramic				Yes	2	BIPOLAR							12,-6 V	Flatpack	FL10,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDFP-F10				No
TL3116CD	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-7 V	3 mV	1.2 uA	Yes	1	BIPOLAR		14.7 mA	-5 V		Tube	5 V	5/±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	1.1 uA	9.9 ns		0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
5962-01-333-9517	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic		4 mV		Yes		BIPOLAR	MIL-STD-883 Class B (Modified)	2 mA				5 V	5 V	Chip Carrier	LCC20,.35SQ	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)		1.3 µs		-55 °C (-67 °F)		Quad	S-XQCC-N20				No
TLC3702CPWG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS		50 μA				5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		2.7 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TL311J	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic		13 mV		No					-15 V			15 V	±15 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	250 pA	165 ns		0 °C (32 °F)		Dual	R-XDIP-T14				No
PTLV4021R1YKAR	Texas Instruments	Comparator	Automotive	Ball	4	VFBGA	Square		Plastic/Epoxy			5 nA	Yes	1							1.8 V		Grid Array, Very Thin Profile, Fine Pitch		Comparators	6 V	0.014 in (0.35 mm)	125 °C (257 °F)		450 ns	Open-Drain	-40 °C (-40 °F)		Bottom	S-PBGA-B4		0.016 in (0.4 mm)	0.028 in (0.7 mm)					0.028 in (0.7 mm)
LM3302DG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		40 mV	-1 uA	Yes	4	BIPOLAR						5 V	5 V	Small Outline	SOP14,.25	Comparators	28 V	0.05 in (1.27 mm)	85 °C (185 °F)	500 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
TL811CU	Texas Instruments	Comparator	Commercial	Flat	10	DFP	Rectangular		Ceramic				Yes		BIPOLAR								Flatpack	FL10,.3	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDFP-F10				No
TL811CJP4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR								In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14
LM2901AVQDR	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		2 mV	500 nA	Yes	4	BIPOLAR		2.5 mA			Tape And Reel	5 V	5 V	Small Outline	SOP14,.24	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
5962R0052402VHA	Texas Instruments	Comparator	Military	Flat	10	DFP	Square	50k Rad(Si)	Ceramic, Glass-Sealed	-30 V	4 mV	1 nA	Yes	1	BIPOLAR	MIL-PRF-38535 Class V	6 mA	-15 V			15 V		Flatpack		Comparators	30 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA	200 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	S-GDFP-F10	1	0.08 in (2.032 mm)	0.27 in (6.858 mm)	Yes	e0			0.27 in (6.858 mm)
5962R9679802VCA	Texas Instruments	Comparator	Military	Through-Hole		DIP	Rectangular	100k Rad(Si)	Ceramic, Glass-Sealed	-18 V	6.8 mV	950 nA	No	2	BIPOLAR	MIL-PRF-38535 Class V	11 mA	-15 V			15 V		In-Line		Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	500 nA	80 ns	Open-Collector	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0			0.785 in (19.94 mm)
LM339AN/B+	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		4 mV		No	4	BIPOLAR		2.5 mA				5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		1.3 µs		0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T14				No	e0
TLV3404ID	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	4			2.56 μA	0 V		Tube	5 V	±1.35/±8/2.7/16 V	Small Outline	SOP14,.25	Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 pA	175 µs	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLC339MN	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		10 mV	30 nA	No	4	CMOS		80 μA			Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	2 pA	2.5 µs	Open-Collector	-55 °C (-67 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.76 in (19.305 mm)
TLV1393IDR	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR		350 μA				3 V	3/5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	105 °C (221 °F)	250 nA	700 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
5962R9673801V9A	Texas Instruments	Comparator	Military	No Lead		DIE		100k Rad(Si)			4 mV	-1 nA	Yes	4	BIPOLAR	MIL-PRF-38535 Class V	2 mA				5 V		Uncased Chip		Comparators	36 V		125 °C (257 °F)	100 nA	5 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)		Upper	X-XUUC-N	1			Yes
TL506CJ	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR								In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14				No
PAMC23C12QDWVRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy				Yes	1		AEC-Q100	2.2 mA				3.3 V		Small Outline	SOP8,.45		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		290 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.11 in (2.8 mm)	0.23 in (5.85 mm)					0.295 in (7.5 mm)
PAMC22C11DR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1			2.2 mA			Tape And Reel	3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		240 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.153 in (3.895 mm)					0.193 in (4.905 mm)
PAMC23C11DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1			3.7 mA				5 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		240 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.11 in (2.8 mm)	0.23 in (5.85 mm)					0.295 in (7.5 mm)
PAMC23C12DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1			4.3 mA				5 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.11 in (2.8 mm)	0.23 in (5.85 mm)					0.295 in (7.5 mm)
5962L9673801VCA	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular	100k Rad(Si)	Ceramic, Glass-Sealed		2.5 mV	1 nA	No	4		MIL-PRF-38535 Class V	2 mA				15 V		In-Line		Comparators	36 V		125 °C (257 °F)	1 nA			-55 °C (-67 °F)		Dual	R-GDIP-T14				Yes
PAMC23C14DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	2			2.2 mA				3.3 V		Small Outline	SOP8,.45		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.11 in (2.8 mm)	0.23 in (5.85 mm)					0.295 in (7.5 mm)
PAMC23C10DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1			3.6 mA			Tape And Reel	3.3 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		230 ns	Open-Drain, Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.11 in (2.8 mm)	0.23 in (5.85 mm)					0.295 in (7.5 mm)
TLV9022DDFR	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		2 mV		Yes	2			70 μA			Tape And Reel, 7 Inch	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.1		6 V	0.026 in (0.65 mm)	125 °C (257 °F)		150 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.043 in (1.1 mm)	0.063 in (1.6 mm)		e4		260 °C (500 °F)	0.114 in (2.9 mm)
PAMC22C12DR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1			2.2 mA			Tape And Reel	3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.153 in (3.895 mm)					0.193 in (4.905 mm)
PAMC22C12QDRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1		AEC-Q100	2.2 mA			Tape And Reel	3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.153 in (3.895 mm)					0.193 in (4.905 mm)
AMC23C14DWV	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	2			2.2 mA		750 V		3.3 V		Small Outline	SOP8,.45		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)
AMC22C11QDRQ1	Texas Instruments	Comparator			8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1		AEC-Q100	2.2 mA		560 V	Tape And Reel, 13 Inch	3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		240 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	2	0.069 in (1.75 mm)	0.153 in (3.895 mm)		e4		260 °C (500 °F)	0.193 in (4.905 mm)
PAMC22C11QDRQ1	Texas Instruments	Comparator			8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1		AEC-Q100	2.2 mA				3.3 V		Small Outline	SOP8,.25		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		240 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.153 in (3.895 mm)					0.193 in (4.905 mm)
PLV3602QDGKRQ1	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Square		Plastic/Epoxy		5 mV	5 uA	Yes	2		AEC-Q100	7 mA			Tape And Reel	2.5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19		6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA	2.5 ns	Push-Pull	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)					0.118 in (3 mm)
AMC23C14DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	2			2.2 mA		750 V		3.3 V		Small Outline	SOP8,.45		6.5 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)
TLV3012AQDBVRQ1	Texas Instruments	Comparator		Gull Wing	6	LSSOP	Rectangular		Plastic/Epoxy		6 mV	10 pA	Yes	1		AEC-Q100	7 μA			Tape And Reel	5 V		Small Outline, Low Profile, Shrink Pitch	TSOP6,.11,37		7 V	0.037 in (0.95 mm)	125 °C (257 °F)	10 pA	12 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)		e4		260 °C (500 °F)	0.114 in (2.9 mm)
LM2903BTQDRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		2.5 mV	50 nA	Yes	2		AEC-Q100	800 μA			Tape And Reel	5 V		Small Outline	SOP8,.25		36 V	0.05 in (1.27 mm)	125 °C (257 °F)	25 nA	1 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.153 in (3.895 mm)		e4		260 °C (500 °F)	0.193 in (4.905 mm)
LM2903BRQDGKRQ1	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Square		Plastic/Epoxy		2.5 mV	50 nA	Yes	2		AEC-Q100	800 μA			Tape And Reel	5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19		36 V	0.026 in (0.65 mm)	125 °C (257 °F)	25 nA	1 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	S-PDSO-G8	1	0.043 in (1.1 mm)	0.118 in (3 mm)		e4		260 °C (500 °F)	0.118 in (3 mm)
AMC23C12DWV	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1			4.3 mA		750 V		5 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)
LM2903BRQDRQ1	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		2.5 mV	50 nA	Yes	2		AEC-Q100	800 μA			Tape And Reel	5 V		Small Outline	SOP8,.25		36 V	0.05 in (1.27 mm)	125 °C (257 °F)	25 nA	1 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.153 in (3.895 mm)		e4		260 °C (500 °F)	0.193 in (4.905 mm)
AMC23C12DWVR	Texas Instruments	Comparator		Gull Wing	8	SOP	Rectangular		Plastic/Epoxy			25 nA	Yes	1			4.3 mA		750 V	Tape And Reel	5 V		Small Outline	SOP8,.45		30 V	0.05 in (1.27 mm)	125 °C (257 °F)		280 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	3	0.11 in (2.8 mm)	0.23 in (5.85 mm)		e4		260 °C (500 °F)	0.295 in (7.5 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.