Comparators

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Nominal Bandwidth (3dB)	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
INA205AIPWT	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		3.5 mV		Yes	2			2.8 mA			12 V	12 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators		0.026 in (0.65 mm)	125 °C (257 °F)	16 uA	1.3 µs		-40 °C (-40 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	4.4 MHz				0.197 in (5 mm)
TLC354CPWR	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		5 mV	600 pA	Yes	4	CMOS		600 μA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	20 nA	650 ns	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LP365M	Texas Instruments	Comparator	Commercial	Gull Wing	16	SOP	Rectangular		Plastic/Epoxy	-18 V	9 mV	800 nA	Yes	4	BIPOLAR			-15 V		15 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)		1 µs	Open-Collector	0 °C (32 °F)		Dual	R-PDSO-G16		0.069 in (1.753 mm)	0.154 in (3.899 mm)						0.39 in (9.902 mm)
TLC393QPWRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	2	CMOS	AEC-Q100	90 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 pA	2.5 µs	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No					0.173 in (4.4 mm)
TLV3401CDBVRG4	Texas Instruments	Comparator	Commercial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	1			950 nA	0 V		2.7 V	±1.25/±8/2.5/16 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	17 V	0.037 in (0.95 mm)	70 °C (158 °F)	250 pA	175 µs	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No		e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
TLV3704IPWG4	Texas Instruments	Comparator	Automotive	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	4	CMOS		4 μA	0 V		5 V	±1.35/±8/2.7/16 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	17 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 pA	240 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TLC352IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	5 mV	2 nA	Yes	2	CMOS		300 μA	0 V	Tube	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	20 nA	650 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
5962-8687701QPA	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed	-18 V	4 mV	100 pA	No	1	BIPOLAR	MIL-STD-883		-15 V		15 V		In-Line		Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)			Open-Collector	-55 °C (-67 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.4 in (10.16 mm)
TLC352CP	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	0 V	5 mV	600 pA	No	2	CMOS		300 μA	0 V	Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	20 nA	650 ns	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.386 in (9.81 mm)
LP311P	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	-18 V	7.5 mV	150 nA	No	1	BIPOLAR		300 μA	-15 V	Tube	15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	100 nA	1.2 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T8	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.386 in (9.81 mm)
LM119MDR	Texas Instruments	Comparator	Military			DIE				-18 V	6.8 mV	950 nA		2	BIPOLAR	MIL-STD-883	11 mA	-15 V		15 V				Comparators	18 V		125 °C (257 °F)	500 nA	80 ns	Open-Collector	-55 °C (-67 °F)				1			No
TLV3801DSGR	Texas Instruments	Comparator		No Lead	8	HVSON	Square		Plastic/Epoxy		5 mV	10 uA	Yes	1			26.6 mA		Tape And Reel	3.3 V		Small Outline, Heat Sink/Slug, Very Thin Profile	SOLCC8,.08,20		5.5 V	0.02 in (0.5 mm)	125 °C (257 °F)		0.225 ns		-40 °C (-40 °F)	Matte Tin	Dual	S-PDSO-N8	2	0.031 in (0.8 mm)	0.079 in (2 mm)			e3		260 °C (500 °F)	0.079 in (2 mm)
TL810CN3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14
TLV2352IPW	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		5 mV	2 nA	Yes	2	CMOS		300 μA		Tube	3 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	8 V	0.026 in (0.65 mm)	85 °C (185 °F)	2 nA	640 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No		e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLC354MFK	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic, Metal-Sealed Cofired		12 mV	20 nA	Yes	4	CMOS		800 μA			5 V	5 V	Chip Carrier	LCC20,.35SQ	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	20 nA	650 ns	Open-Drain	-55 °C (-67 °F)		Quad	S-CQCC-N20		0.08 in (2.03 mm)	0.35 in (8.89 mm)	No					0.35 in (8.89 mm)
SN72811J	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14				No
TL510MFK	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic				Yes		BIPOLAR							Chip Carrier	LCC20,.35SQ	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Quad	S-XQCC-N20				No
TLC393MJG	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		5 mV	30 nA	No	2	CMOS		90 μA			5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	30 nA	1.1 µs	Open-Drain	-55 °C (-67 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.378 in (9.6 mm)
LMH7220MG	Texas Instruments	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular		Plastic/Epoxy		9.5 mV	-500 nA	Yes	1			14 mA			5 V	2.7/5/12 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	13.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	500 nA	3.63 ns		-40 °C (-40 °F)		Dual	R-PDSO-G6		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No					0.079 in (2 mm)
JL111SPA	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed	-30 V	3 mV	100 pA	No	1	BIPOLAR	MIL-STD-883		-15 V		15 V		In-Line		Comparators	30 V	0.1 in (2.54 mm)	125 °C (257 °F)		640 ns	Open-Collector	-55 °C (-67 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)						0.4 in (10.16 mm)
LM119W/883	Texas Instruments	Comparator	Military	Gull Wing	10	SOP	Rectangular		Ceramic, Glass-Sealed	-18 V	4 mV	500 nA	Yes	2	BIPOLAR	MIL-STD-883	11 mA	-15 V	Tube	15 V	±15 V	Small Outline	FL14,.3	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	500 nA	80 ns	Open-Collector	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDSO-G10	1	0.08 in (2.032 mm)	0.241 in (6.12 mm)	No		e0			0.27 in (6.858 mm)
LM339N/B+	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		9 mV		No	4	BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		1.3 µs		0 °C (32 °F)	Tin/Lead	Dual	R-PDIP-T14				No		e0
5962-9452602VGA	Texas Instruments	Comparator	Military	Wire	8		Round		Metal		4 mV	-1 nA	No	2	BIPOLAR	MIL-PRF-38535 Class V				5 V		Cylindrical		Comparators	36 V		125 °C (257 °F)			Open-Collector	-55 °C (-67 °F)		Bottom	O-MBCY-W8				No
LM111L	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic, Metal-Sealed Cofired		4 mV	150 nA	Yes	1			6 mA	-15 V		15 V		Chip Carrier					125 °C (257 °F)		200 ns	Open-Collector, Open-Emitter	-55 °C (-67 °F)		Quad	S-CQCC-N20				No
LM311P/P3	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		10 mV		No		BIPOLAR			-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8
5962-9673801VXA	Texas Instruments	Comparator	Military	Gull Wing		SOP	Rectangular	100k Rad(Si)	Ceramic, Metal-Sealed Cofired	0 V	4 mV	-1 nA	Yes	4	BIPOLAR	MIL-PRF-38535 Class V	2 mA	0 V		5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA		Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-CDSO-G14	1	0.092 in (2.33 mm)	0.25 in (6.35 mm)	Yes		e0			0.39 in (9.91 mm)
LM311N-N	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		10 mV		No	1	BIPOLAR			-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	200 ns		0 °C (32 °F)		Dual	R-PDIP-T8				No
LM293AP	Texas Instruments	Comparator	Other	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	0 V	4 mV	-400 nA	No	2	BIPOLAR		2.5 mA	0 V		5 V	5/30 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-25 °C (-13 °F)		Dual	R-PDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.386 in (9.81 mm)
SN52711L	Texas Instruments	Comparator	Military	Wire	10		Round		Metal						BIPOLAR						12,-6 V	Cylindrical	CAN10,.23	Comparators			125 °C (257 °F)				-55 °C (-67 °F)		Bottom	O-MBCY-W10				No
LM306JG	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic				No	1	BIPOLAR						12,-3/-12 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T8				No
5962-8687801CX	Texas Instruments	Comparator																						Comparators														No
V62/03643-01XE	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		5 mV	30 pA	Yes	2	CMOS		40 μA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
5962-9679801VIX	Texas Instruments	Comparator	Military	Wire	10	TO-5	Round		Metal	-18 V	4 mV	500 nA	No	2	BIPOLAR	MIL-PRF-38535 Class V		-15 V		15 V		Cylindrical		Comparators	18 V		125 °C (257 °F)		80 ns	Open-Collector	-55 °C (-67 °F)		Bottom	O-MBCY-W10				No
LMV761MAX/NOPB	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		1 mV	50 pA	Yes	1		AEC-Q100	700 μA		Tape And Reel	2.7 V	2.7/5 V	Small Outline	SOP8,.25	Comparators	5.5 V	0.05 in (1.27 mm)	125 °C (257 °F)	5 pA	120 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e3	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLV3404IDR	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	4			2.56 μA	0 V	Tape And Reel	5 V	±1.35/±8/2.7/16 V	Small Outline	SOP14,.25	Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 pA	175 µs	Open-Drain	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLV2352IDRG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	2	CMOS		400 μA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	8 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 nA	640 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LP111JG	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed	-18 V	10 mV	150 nA	No	1	BIPOLAR		300 μA	-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 nA	1.2 µs	Open-Collector, Open-Emitter	-55 °C (-67 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.378 in (9.6 mm)
TLV7211IDCKRG4	Texas Instruments	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular		Plastic/Epoxy	0 V	18 mV		Yes	1	CMOS		14 μA	0 V		5 V	3/15 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators	16 V	0.026 in (0.65 mm)	85 °C (185 °F)		10 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No		e4	30 s	260 °C (500 °F)	0.079 in (2 mm)
TL710CJP4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14
TL506MJ/883B	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Metal-Sealed Cofired	-15 V	2 mV	45 uA	No	1	BIPOLAR	MIL-STD-883 Class B		-6 V		12 V		In-Line	DIP14,.3	Comparators	15 V	0.1 in (2.54 mm)	125 °C (257 °F)		28 ns		-55 °C (-67 °F)		Dual	R-CDIP-T14				No
M38510/11201BDX	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular		Ceramic, Metal-Sealed Cofired	-18 V	7 mV	1 nA	Yes	4	BIPOLAR					15 V		Flatpack		Comparators	18 V		125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-CDFP-F14				Yes
TL391BQDBVRQ1	Texas Instruments	Comparator		Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy		2.5 mV	-50 nA	Yes	1	BIPOLAR	AEC-Q100	330 μA		Tape And Reel	5 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37		38 V	0.037 in (0.95 mm)	125 °C (257 °F)	25 nA	1 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)			e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
LM339PWLE	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	4	BIPOLAR		2 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)		Dual	R-PDSO-G14		0.047 in (1.2 mm)	0.173 in (4.4 mm)	No					0.197 in (5 mm)
TLC393CPWLE	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS		50 μA			5 V	5/10 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		2.5 µs	Open-Drain	0 °C (32 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No					0.173 in (4.4 mm)
V62/18613-01XE	Texas Instruments	Comparator	Military	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		2.5 mV	20 nA	Yes	4	BIPOLAR							Small Outline, Thin Profile, Shrink Pitch		Comparators	40 V	0.026 in (0.65 mm)	125 °C (257 °F)	15 nA	560 ns	Open-Collector	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	2	0.047 in (1.2 mm)	0.173 in (4.4 mm)			e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LM119J-MPR	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	-18 V	4 mV	500 nA	No	2	BIPOLAR			-15 V		15 V		In-Line		Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		80 ns	Open-Collector	-55 °C (-67 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.765 in (19.43 mm)
LM311H/NOPB	Texas Instruments	Comparator	Commercial	Wire	8	TO-99	Round		Metal	-18 V	10 mV	300 nA	No	1	BIPOLAR			-15 V		15 V	±15 V	Cylindrical	CAN8,.2	Comparators	18 V		70 °C (158 °F)	250 nA	200 ns	Open-Collector, Open-Drain	0 °C (32 °F)		Bottom	O-MBCY-W8	1			No
UA711MJB	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR	38535Q/M;38534H;883B					12,-6 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.