Comparators

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TLC372QDG4	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	20 nA	Yes	2	CMOS		300 μA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	650 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TL514CJ4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic				No	2	BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14
5962-01-055-7443	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TLC339CPW	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		80 μA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	2 pA	2.5 µs	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
LMV7275MFX	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy	0 V	4 mV		Yes	1	BICMOS		16 μA	0 V		1.8 V	1.8/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	5.5 V	0.037 in (0.95 mm)	85 °C (185 °F)		2.1 µs		-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G5	1	0.048 in (1.22 mm)	0.063 in (1.6 mm)	No	e0		260 °C (500 °F)	0.114 in (2.9 mm)
LM2901QN	Texas Instruments	Comparator	Automotive	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		15 mV	-500 nA	No	4	BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.76 in (19.305 mm)
LMC7211BIM/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	18 mV	1 nA	Yes	1	CMOS		12 μA	0 V	Tube	5 V	2.7/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.4 pA	4 µs	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e3		260 °C (500 °F)	0.193 in (4.9 mm)
5962-9153201QPA	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Metal-Sealed Cofired		5 mV	30 nA	No	2	CMOS	MIL-PRF-38535 Class Q	40 μA		Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Tin/Lead	Dual	R-CDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes	e0			0.377 in (9.58 mm)
LMV331DCKR	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy		7 mV	400 nA	Yes	1	CMOS		200 μA			2.7 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	400 ns		-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No				0.079 in (2 mm)
LM311P3	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		10 mV		No		BIPOLAR			-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8
TLC354MN	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		10 mV	20 nA	No	4	CMOS		400 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	20 nA	650 ns	Open-Drain	-55 °C (-67 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.76 in (19.305 mm)
5962-01-241-7001	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic		4 mV		No		BIPOLAR	MIL-STD-883 Class B (Modified)	2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)		1.3 µs		-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TLV3701IDBV	Texas Instruments	Comparator	Automotive	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	1				0 V		5 V		Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	17 V	0.037 in (0.95 mm)	125 °C (257 °F)		240 µs	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No				0.114 in (2.9 mm)
LM393P/P3	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy		9 mV		No	2	BIPOLAR					5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8
TLV2354MJ	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed		10 mV	20 nA	No	4	CMOS		800 μA			3 V	3/5 V	In-Line	DIP14,.3	Comparators	8 V	0.1 in (2.54 mm)	125 °C (257 °F)		1.4 µs	Open-Drain	-55 °C (-67 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.77 in (19.56 mm)
5962R9679801VXX	Texas Instruments	Comparator	Military	Gull Wing	10	SOP	Rectangular		Ceramic, Metal-Sealed Cofired		6.8 mV	950 nA	Yes	2		MIL-STD-883				5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)		80 ns	Open-Collector	-55 °C (-67 °F)		Dual	R-CDSO-G10		0.092 in (2.33 mm)	0.241 in (6.12 mm)	Yes
LM139MD8	Texas Instruments	Comparator	Military	No Lead		DIE		100k Rad(Si)			2 mV	100 nA	Yes	4	BIPOLAR	38535Q/M;38534H;883B	2 mA			5 V	5 V	Uncased Chip	DIE OR CHIP	Comparators	36 V		125 °C (257 °F)	100 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)		Upper	X-XUUC-N	1			No
LP2901IDRG4Q1	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		5 mV	40 nA	Yes	4	BIPOLAR	AEC-Q100	100 μA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.25	Comparators	36 V	0.05 in (1.27 mm)	85 °C (185 °F)	25 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
TLC3704CPW	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy	-18 V	6.5 mV	600 pA	Yes	4	CMOS		80 μA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	30 pA	2.7 µs	Push-Pull	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4		260 °C (500 °F)	0.197 in (5 mm)
LMC7221BIM/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	18 mV	0.04 pA	Yes	1	CMOS		14 μA	0 V	Tube	5 V	2.7/15 V	Small Outline	SOP8,.25	Comparators	16 V	0.05 in (1.27 mm)	85 °C (185 °F)	0.4 pA	7 µs	Open-Drain	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.069 in (1.753 mm)	0.154 in (3.899 mm)	No	e3		260 °C (500 °F)	0.193 in (4.902 mm)
TLC193MFK	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic, Metal-Sealed Cofired		10 mV	30 nA	Yes	2	CMOS		90 μA			5 V	5/10 V	Chip Carrier	LCC20,.35SQ	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)		2.5 µs	Open-Drain	-55 °C (-67 °F)		Quad	S-CQCC-N20		0.08 in (2.03 mm)	0.35 in (8.89 mm)	No				0.35 in (8.89 mm)
5962-9153201QHA	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		10 mV	30 nA	No	2	CMOS	MIL-PRF-38535 Class Q	90 μA			5 V	5 V	In-Line	FL10,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		2.7 µs	Push-Pull	-55 °C (-67 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.377 in (9.58 mm)
LM2901NSE4	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	15 mV	-500 nA	Yes	4	BIPOLAR			0 V		5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4	30 s	260 °C (500 °F)	0.402 in (10.2 mm)
TLV3701IDRG4	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	1	CMOS		1 μA	0 V		5 V	±1.35/±8/2.7/16 V	Small Outline	SOP8,.25	Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 pA	240 µs	Push-Pull	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LM2901AVQDRG4	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		2 mV	500 nA	Yes	4	BIPOLAR		2.5 mA		Tape And Reel	5 V	5 V	Small Outline	SOP14,.24	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
5962R9679801VIX	Texas Instruments	Comparator	Military	Wire	10	TO-5	Round		Metal	-18 V	4 mV	500 nA	No	2	BIPOLAR	MIL-STD-883	11.5 mA	-15 V		15 V		Cylindrical		Comparators	18 V		125 °C (257 °F)		80 ns	Open-Collector	-55 °C (-67 °F)		Bottom	O-MBCY-W10				Yes
5962R9673802VXA	Texas Instruments	Comparator	Military	Gull Wing		SOP	Rectangular	100k Rad(Si)	Ceramic, Metal-Sealed Cofired	0 V	4 mV	-1 nA	Yes	4	BIPOLAR	MIL-PRF-38535 Class V	2 mA	0 V		5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA		Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-CDSO-G14	1	0.092 in (2.33 mm)	0.25 in (6.35 mm)	Yes	e0			0.39 in (9.91 mm)
TLV4051R1YKAR	Texas Instruments	Comparator	Automotive	Ball	4	VFBGA	Square						Yes	1			5 μA		Tape And Reel	1.8 V		Grid Array, Very Thin Profile, Fine Pitch	BGA4,2X2,14	Comparators	6 V	0.014 in (0.35 mm)	125 °C (257 °F)		360 ns	Push-Pull	-40 °C (-40 °F)	Tin/Silver/Copper	Bottom	S-XBGA-B4	1	0.016 in (0.4 mm)	0.029 in (0.73 mm)		e1	30 s	260 °C (500 °F)	0.029 in (0.73 mm)
SN52710J	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
5962-9673802V9B	Texas Instruments	Comparator	Military	No Lead	14	DIE	Rectangular	40k Rad(Si)			2 mV	-300 nA	Yes	4	BIPOLAR	MIL-STD-883 Class V	2 mA			5 V		Uncased Chip		Comparators	36 V		125 °C (257 °F)	25 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)		Upper	R-XUUC-N14	1			Yes
SN52111L	Texas Instruments	Comparator	Military	Wire	8		Round		Metal		4 mV				BIPOLAR			-15 V		15 V	±15 V	Cylindrical	CAN8,.2	Comparators			125 °C (257 °F)				-55 °C (-67 °F)		Bottom	O-MBCY-W8				No
TLC339CDB	Texas Instruments	Comparator	Commercial	Gull Wing	14	SSOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS					5 V		Small Outline, Shrink Pitch		Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		2.5 µs	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	2	0.079 in (2 mm)	0.209 in (5.3 mm)	No	e4			0.244 in (6.2 mm)
TLC352CDR	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	5 mV	600 pA	Yes	2	CMOS		300 μA	0 V	Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	20 nA	650 ns	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
5962-9679801VCX	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	-18 V	4 mV	500 nA	No	2	BIPOLAR	MIL-PRF-38535 Class V		-15 V		15 V		In-Line		Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		80 ns	Open-Collector	-55 °C (-67 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	Yes				0.765 in (19.43 mm)
LM111WGRLQMLV	Texas Instruments	Comparator	Military	Gull Wing	10	SOP	Rectangular	50k Rad(Si)	Ceramic, Glass-Sealed	-18 V	4 mV	150 nA	Yes	1	BIPOLAR	MIL-PRF-38535 Class V	6 mA	-15 V		15 V	±15 V	Small Outline	SOP10,.4	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA	200 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-GDSO-G10	1	0.092 in (2.33 mm)	0.241 in (6.12 mm)	No	e0			0.27 in (6.858 mm)
TLV2352MJG	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		5 mV	20 nA	No	2	CMOS		300 μA		Tube	3 V	3/5 V	In-Line	DIP8,.3	Comparators	8 V	0.1 in (2.54 mm)	125 °C (257 °F)	20 nA	1.4 µs	Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.378 in (9.6 mm)
PLV3601QDCKTQ1	Texas Instruments	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy		5 mV	5 uA	Yes	1			8 mA			3.3 V		Small Outline, Thin Profile, Shrink Pitch	TSOP5,.08		6 V	0.026 in (0.65 mm)	125 °C (257 °F)	5 uA	2.5 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)					0.079 in (2 mm)
5962R9452603VGA	Texas Instruments	Comparator	Military		8	TO-99	Round	100k Rad(Si)	Metal	0 V	4 mV	-300 nA	No	2	BIPOLAR	MIL-PRF-38535 Class V	1 mA			5 V		Cylindrical		Comparators	36 V		125 °C (257 °F)	100 nA	800 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)		Bottom	O-MBCY-X8	1			Yes
LM111J	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	-18 V	4 mV	150 nA	No	1	BIPOLAR		6 mA	-15 V		15 V	±15 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)		115 ns	Open-Collector, Open-Emitter	-55 °C (-67 °F)		Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.77 in (19.56 mm)
TLC339IN	Texas Instruments	Comparator	Industrial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		7 mV	2 nA	No	4	CMOS		80 μA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 pA	2.5 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e4			0.76 in (19.305 mm)
TLV7044RTER	Texas Instruments	Comparator	Automotive	No Lead	16	HVQCCN	Square		Plastic/Epoxy		8 mV	2 pA	Yes	4			3 μA		Tape And Reel	1.8 V		Chip Carrier, Heat Sink/Slug, Very Thin Profile	LCC16,.12SQ,20	Comparators	7 V	0.02 in (0.5 mm)	125 °C (257 °F)	2 pA	3 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	S-PQCC-N16	1	0.031 in (0.8 mm)	0.118 in (3 mm)		e4	30 s	260 °C (500 °F)	0.118 in (3 mm)
LT1016CDR	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-7 V	3.5 mV	13 uA	Yes	1	BIPOLAR		35 mA	-5 V		5 V	±5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)	10 uA	10 ns		0 °C (32 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TL3016CPWRG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy	-7 V	3.5 mV	10 uA	Yes	1	BIPOLAR		12.5 mA	-5 V		5 V	±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)	10 uA	7.8 µs		0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TLC371MD	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	20 nA	Yes	1	CMOS		200 μA			5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	20 nA	650 ns	Open-Drain	-55 °C (-67 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
LM193AJ-QMLV	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed	0 V	4 mV	300 nA	No	2	BIPOLAR	MIL-PRF-38535 Class V	1 mA	0 V	Tube	5 V	5 V	In-Line	DIP8,.3	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 nA	1.3 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T8	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.386 in (9.8 mm)
TLC352CDRG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	6.5 mV	600 pA	Yes	2	CMOS		300 μA	0 V	Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)	20 nA	650 ns	Open-Drain	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4		260 °C (500 °F)	0.193 in (4.9 mm)
TLV3702CDR	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	2	CMOS		2 μA	0 V		2.7 V	±1.25/±8/2.5/16 V	Small Outline	SOP8,.25	Comparators	17 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 pA	240 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4			0.193 in (4.9 mm)
TL712CPWR	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		5 mV	600 uA	Yes	1	BIPOLAR		20 mA		Tape And Reel	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)	600 uA	25 ns	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.