Comparators

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Nominal Bandwidth (3dB)	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
5962R9673802V9A	Texas Instruments	Comparator	Military	No Lead		DIE		100k Rad(Si)			4 mV	-1 nA	Yes	4	BIPOLAR	MIL-PRF-38535 Class V	2 mA			5 V		Uncased Chip		Comparators	36 V		125 °C (257 °F)	100 nA	5 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)		Upper	X-XUUC-N	1			Yes
LMV7239QM7X/NOPB	Texas Instruments	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy		8 mV	600 nA	Yes	1	BIPOLAR	AEC-Q100	95 μA		Tape And Reel	5 V	2.7/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	6 V	0.026 in (0.65 mm)	125 °C (257 °F)	400 nA	75 ns	Push-Pull	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G5	1	0.043 in (1.1 mm)	0.049 in (1.25 mm)	No		e3		260 °C (500 °F)	0.079 in (2 mm)
LMV7231SQ	Texas Instruments	Comparator	Automotive	No Lead	24	HVQCCN	Square					15 nA	Yes	1						3.3 V		Chip Carrier, Heat Sink/Slug, Very Thin Profile		Comparators	6 V	0.02 in (0.5 mm)	125 °C (257 °F)		500 ns	Open-Drain	-40 °C (-40 °F)		Quad	S-XQCC-N24		0.031 in (0.8 mm)	0.157 in (4 mm)	No					0.157 in (4 mm)
5962R0052402V9X	Texas Instruments	Comparator	Military	No Lead	10	DIE	Rectangular	100k Rad(Si)		-30 V	4 mV	100 pA	Yes	1		MIL-PRF-38535 Class V	7 mA	-15 V		15 V		Uncased Chip		Comparators	30 V		125 °C (257 °F)			Open-Collector	-55 °C (-67 °F)		Upper	R-XUUC-N10				No
TLC3702QJG	Texas Instruments	Comparator	Automotive	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		10 mV	30 nA	No	2	CMOS		90 μA			5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	30 nA	2.7 µs	Totem Pole	-40 °C (-40 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.378 in (9.6 mm)
TL810CU	Texas Instruments	Comparator	Commercial	Flat	10	DFP	Rectangular		Ceramic				Yes		BIPOLAR							Flatpack	FL10,.3	Comparators		0.05 in (1.27 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDFP-F10				No
LM111E/883	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square			-18 V	4 mV	150 nA	Yes	1	BIPOLAR	MIL-STD-883		-15 V		15 V		Chip Carrier		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)			Open-Collector	-55 °C (-67 °F)		Quad	S-XQCC-N20		0.075 in (1.91 mm)	0.35 in (8.89 mm)						0.35 in (8.89 mm)
JL193BGA	Texas Instruments	Comparator	Military	Wire	8	TO-99	Round		Metal		7 mV	100 pA	No	2	BIPOLAR	MIL-STD-883	1 mA			5 V	±2.5/±18/5/36 V	Cylindrical	CAN8,.2	Comparators	36 V	0.1 in (2.54 mm)	125 °C (257 °F)	100 nA	7 µs	Open-Collector, Open-Drain	-55 °C (-67 °F)		Bottom	O-MBCY-W8	1	0.225 in (5.72 mm)	0.357 in (9.08 mm)	No					0.357 in (9.08 mm)
LMV762QMM	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Square		Plastic/Epoxy		1 mV	50 pA	Yes	2						5 V		Small Outline, Thin Profile, Shrink Pitch		Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)		225 ns	Push-Pull	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.09 mm)	0.118 in (3 mm)	No					0.118 in (3 mm)
TLV3704CDR	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	7 mV	1.5 nA	Yes	4	CMOS		4 μA	0 V		2.7 V	±1.25/±8/2.5/16 V	Small Outline	SOP14,.25	Comparators	17 V	0.05 in (1.27 mm)	70 °C (158 °F)	250 pA	240 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4			0.341 in (8.65 mm)
MLM311P	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy	-18 V	10 mV	300 nA	No	1	BIPOLAR		7.5 mA	-15 V		15 V	±15 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	200 ns	Open-Collector	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T8	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e0			0.378 in (9.59 mm)
TLC374MFKB	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic, Metal-Sealed Cofired		10 mV	20 nA	Yes	4	CMOS	MIL-STD-883	600 μA		Tube	5 V	5 V	Chip Carrier	LCC20,.35SQ	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	650 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Quad	S-CQCC-N20		0.08 in (2.03 mm)	0.35 in (8.89 mm)	No		e0			0.35 in (8.89 mm)
TLC3702CJG	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		6.5 mV		No	2	CMOS		50 μA			5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	600 pA	1.1 µs	Totem Pole	0 °C (32 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No					0.378 in (9.6 mm)
TLC371IDR	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	1	CMOS		200 μA			5 V		Small Outline			18 V	0.05 in (1.27 mm)	85 °C (185 °F)		650 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No					0.193 in (4.9 mm)
LMP7300MMX/NOPB	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		750 uV	3 nA	Yes	1			16 μA		Tape And Reel		2.7/12 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators		0.026 in (0.65 mm)	125 °C (257 °F)	3 nA	7.7 µs	Open-Collector	-40 °C (-40 °F)	Matte Tin	Dual	R-PDSO-G8	1	0.042 in (1.07 mm)	0.118 in (3 mm)	No		e3	30 s	260 °C (500 °F)	0.118 in (3 mm)
5962-3811201BCX	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Metal-Sealed Cofired	-18 V	7 mV	1 nA	No	4				0 V		15 V		In-Line		Comparators	18 V		125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-CDIP-T14				No
LM339ANSE4	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	4 mV	-400 nA	Yes	4	BIPOLAR			0 V		5 V		Small Outline		Comparators	36 V	0.05 in (1.27 mm)	70 °C (158 °F)		1.3 µs	Open-Collector	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.079 in (2 mm)	0.209 in (5.3 mm)	No		e4	30 s	260 °C (500 °F)	0.402 in (10.2 mm)
TLC374IDG4	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		7 mV	2 nA	Yes	4	CMOS		800 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	85 °C (185 °F)	2 nA	650 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LM306P/P3	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Plastic/Epoxy				No	1	BIPOLAR						12,-3/-12 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T8
LM139AWB	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular		Ceramic, Glass-Sealed		2 mV	25 nA	Yes	4	BIPOLAR	MIL-STD-883	2 mA		Tube	5 V	5 V	Flatpack	FL14,.3	Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	25 nA	1.3 µs	Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-GDFP-F14		0.08 in (2.03 mm)	0.235 in (5.97 mm)	No		e0			0.363 in (9.21 mm)
LM306DRE4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-15 V	6.5 mV	40 uA	Yes	1	BIPOLAR			-12 V		12 V	12,-3/-12 V	Small Outline	SOP8,.25	Comparators	15 V	0.05 in (1.27 mm)	70 °C (158 °F)		28 ns	Totem Pole	0 °C (32 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No					0.193 in (4.9 mm)
M38510/11202BPX	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic, Metal-Sealed Cofired	-18 V	7 mV	1 nA	No	2	BIPOLAR					15 V		In-Line		Comparators	18 V		125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-CDIP-T8				Yes
MLM339P	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		5 mV	250 nA	No	4	BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP14,.3	Comparators	36 V	0.1 in (2.54 mm)	70 °C (158 °F)	250 nA	1.3 µs	Open-Collector	0 °C (32 °F)	Tin Lead	Dual	R-PDIP-T14	1	0.21 in (5.334 mm)	0.3 in (7.62 mm)	No		e0			0.75 in (19.05 mm)
TLC3704CPWG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy	-18 V	6.5 mV	600 pA	Yes	4	CMOS		100 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		2.7 µs	Push-Pull	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
5962R9679802VIA	Texas Instruments	Comparator	Military	Wire		TO-100	Round	100k Rad(Si)	Metal	-18 V	6.8 mV	950 nA	No	2	BIPOLAR	MIL-PRF-38535 Class V	11 mA	-15 V		15 V		Cylindrical		Comparators	18 V		125 °C (257 °F)	500 nA	80 ns	Open-Collector	-55 °C (-67 °F)		Bottom	O-MBCY-W10	1			Yes
TL336MJ	Texas Instruments	Comparator	Military	Through-Hole	20	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP20,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T20				No
M38510/10304BGX	Texas Instruments	Comparator	Military		8		Round		Metal	-30 V	4 mV	100 pA	No	1		MIL-M-38510 Class B	13.5 mA	-15 V		15 V		Cylindrical		Comparators	30 V		125 °C (257 °F)				-55 °C (-67 °F)		Bottom	O-MBCY-X8				Yes
UA711CJ	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic				No	2	BIPOLAR						12,-6 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14				No
TLC339CPWG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		80 μA		Tube	5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)	2 pA	2.5 µs	Open-Drain	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No		e4		260 °C (500 °F)	0.197 in (5 mm)
5962-01-252-3841	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic				No		BIPOLAR						12,-3/-12 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T8				No
TLC374CN-AE4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	No	4	CMOS		800 μA			5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	600 pA	650 ns	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.76 in (19.305 mm)
TL510MJG/883B	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic				No		BIPOLAR	MIL-STD-883 Class B (Modified)						In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T8				No
TL810MJ	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
LM311DBR	Texas Instruments	Comparator	Commercial	Gull Wing	8	SSOP	Rectangular		Plastic/Epoxy	-18 V	10 mV	300 nA	Yes	1	BIPOLAR			-15 V		15 V		Small Outline, Shrink Pitch			18 V	0.026 in (0.65 mm)	70 °C (158 °F)		165 ns		0 °C (32 °F)		Dual	R-PDSO-G8		0.079 in (2 mm)	0.118 in (3 mm)	No					0.209 in (5.3 mm)
TLV4041R2YKAR	Texas Instruments	Comparator	Automotive	Ball	4	VFBGA	Square						Yes	1			5 μA		Tape And Reel	1.8 V		Grid Array, Very Thin Profile, Fine Pitch	BGA4,2X2,14	Comparators	6 V	0.014 in (0.35 mm)	125 °C (257 °F)		360 ns	Push-Pull	-40 °C (-40 °F)	Tin/Silver/Copper	Bottom	S-XBGA-B4	1	0.016 in (0.4 mm)	0.029 in (0.73 mm)			e1		260 °C (500 °F)	0.029 in (0.73 mm)
LMV393QPWR	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR		140 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No					0.173 in (4.4 mm)
TLC3704CN	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy	-18 V	6.5 mV	600 pA	No	4	CMOS		80 μA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	30 pA	2.7 µs	Push-Pull	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No		e4			0.76 in (19.305 mm)
TL720CN	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy	-7 V	10 mV	150 uA	No	2	BIPOLAR			-6 V		12 V		In-Line	DIP14,.3	Comparators	14 V	0.1 in (2.54 mm)	70 °C (158 °F)		40 ns	Open-Collector	0 °C (32 °F)		Dual	R-PDIP-T14				No
TLV3401CDBV	Texas Instruments	Comparator	Commercial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	1			950 nA	0 V		2.7 V	±1.25/±8/2.5/16 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	17 V	0.037 in (0.95 mm)	70 °C (158 °F)	250 pA	175 µs	Open-Drain	0 °C (32 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No					0.114 in (2.9 mm)
5962-01-090-1934	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR	MIL-STD-883 Class B (Modified)						In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
LMV393QDGKR	Texas Instruments	Comparator	Automotive	Gull Wing	8	TSSOP	Square		Plastic/Epoxy		9 mV	400 nA	Yes	2	BIPOLAR		140 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.19	Comparators	5.5 V	0.026 in (0.65 mm)	125 °C (257 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	S-PDSO-G8		0.043 in (1.1 mm)	0.118 in (3 mm)	No					0.118 in (3 mm)
TLV2393IPW-00LE	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR					3 V		Small Outline, Thin Profile, Shrink Pitch			7 V	0.026 in (0.65 mm)	105 °C (221 °F)		450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.047 in (1.2 mm)	0.118 in (3 mm)	No					0.173 in (4.4 mm)
LMH7220MGX/NOPB	Texas Instruments	Comparator	Industrial	Gull Wing	6	TSSOP	Rectangular		Plastic/Epoxy		9.5 mV		Yes	1			14 mA				2.7/5/12 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP6,.08	Comparators		0.026 in (0.65 mm)	85 °C (185 °F)	500 nA			-40 °C (-40 °F)		Dual	R-PDSO-G6		0.043 in (1.1 mm)	0.049 in (1.25 mm)	No	1.25 MHz				0.079 in (2 mm)
TL510MJ/883B	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR	MIL-STD-883 Class B (Modified)						In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
TL714CDRG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy				Yes	1	BIPOLAR		12 mA			5 V	5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)		6 ns	Totem Pole	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
LM3302D	Texas Instruments	Comparator	Industrial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		40 mV	-1 uA	Yes	4	BIPOLAR		2 mA		Tube	5 V	5 V	Small Outline	SOP14,.25	Comparators	28 V	0.05 in (1.27 mm)	85 °C (185 °F)	500 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No		e4		260 °C (500 °F)	0.341 in (8.65 mm)
TLV7081YKAR	Texas Instruments	Comparator	Automotive	Ball	4	VFBGA	Square		Plastic/Epoxy		10 mV	10 pA	Yes	1			900 nA			3.3 V		Grid Array, Very Thin Profile, Fine Pitch		Comparators	6 V	0.014 in (0.35 mm)	125 °C (257 °F)	10 pA	4 µs	Open-Drain	-40 °C (-40 °F)	Tin Silver Copper	Bottom	S-PBGA-B4	1	0.016 in (0.4 mm)	0.028 in (0.7 mm)			e1	30 s	260 °C (500 °F)	0.028 in (0.7 mm)
TL810CNP3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.