Comparators

Reset All

Part	Manufacturer	Amplifier Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Maximum Negative Supply Voltage Limit	Maximum Input Offset Voltage	Maximum Average Bias Current (IIB)	Surface Mount	No. of Functions	Technology	Screening Level	Maximum Supply Current	Nominal Negative Supply Voltage (Vsup)	Packing Method	Nominal Supply Voltage / Vsup (V)	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum Supply Voltage Limit	Terminal Pitch	Maximum Operating Temperature	Maximum Bias Current (IIB) @25C	Nominal Response Time	Output Type	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length
TLC3702IJG	Texas Instruments	Comparator	Industrial	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		7 mV		No	2	CMOS		65 μA			5 V	5 V	In-Line	DIP8,.3	Comparators	18 V	0.1 in (2.54 mm)	85 °C (185 °F)	2 nA	1.1 µs	Totem Pole	-40 °C (-40 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)
LM339AN3	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy		4 mV		No		BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)		1.3 µs		0 °C (32 °F)		Dual	R-PDIP-T14
SN72306L	Texas Instruments	Comparator	Commercial	Wire	8		Round		Metal					1	BIPOLAR						12,-3/-12 V	Cylindrical	CAN8,.2	Comparators			70 °C (158 °F)				0 °C (32 °F)		Bottom	O-MBCY-W8				No
TL810MJG	Texas Instruments	Comparator	Military	Through-Hole	8	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T8				No
SN52506FA	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular		Ceramic				Yes		BIPOLAR							Flatpack	FL14,.3	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDFP-F14				No
TL393Y	Texas Instruments	Comparator	Industrial	No Lead	8	DIE	Rectangular				5 mV	-250 nA	Yes	2	BIPOLAR		1 mA			5 V		Uncased Chip			7 V		105 °C (221 °F)		650 ns	Open-Collector	-40 °C (-40 °F)		Upper	R-XUUC-N8				No
LMV331DBVR	Texas Instruments	Comparator	Industrial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy		7 mV	400 nA	Yes	1	CMOS		200 μA			2.7 V	2.7/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	5.5 V	0.037 in (0.95 mm)	85 °C (185 °F)	250 nA	400 ns		-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)	No				0.114 in (2.9 mm)
M38510/11201BDA	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular		Ceramic, Metal-Sealed Cofired	-18 V	5 mV	100 nA	Yes	4	BIPOLAR	MIL-PRF-38535 Class B	2 mA		Tube	15 V	5 V	Flatpack	FL14,.3	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA	700 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-CDFP-F14	1	0.08 in (2.032 mm)	0.25 in (6.35 mm)	Yes	e0			0.39 in (9.906 mm)
LM239J/NOPB	Texas Instruments	Comparator	Other	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed	0 V	9 mV	400 nA	No	4	BIPOLAR			0 V		5 V		In-Line		Comparators	36 V	0.1 in (2.54 mm)	85 °C (185 °F)		1.3 µs	Open-Collector	-25 °C (-13 °F)		Dual	R-GDIP-T14	1	0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.765 in (19.43 mm)
TLC3702MDRG4	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		10 mV	30 nA	Yes	2	CMOS		40 μA		Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	2.7 µs	Push-Pull	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLV4082QDBVRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	6	LSSOP	Rectangular		Plastic/Epoxy		6 mV	15 nA	Yes	2		AEC-Q100	12 μA		Tape And Reel	3.3 V		Small Outline, Low Profile, Shrink Pitch	SOP6,.11,38	Comparators	7 V	0.037 in (0.95 mm)	125 °C (257 °F)	15 nA	5.5 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G6	2	0.057 in (1.45 mm)	0.063 in (1.6 mm)		e4	30 s	260 °C (500 °F)	0.114 in (2.9 mm)
5962-01-173-1913	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
LMH7324SQ	Texas Instruments	Comparator	Automotive	No Lead	32	HVQCCN	Square				9.5 mV		Yes	1						5 V		Chip Carrier, Heat Sink/Slug, Very Thin Profile		Comparators	13.2 V	0.02 in (0.5 mm)	125 °C (257 °F)		0.74 ns	Open-Emitter	-40 °C (-40 °F)	Tin Lead	Quad	S-XQCC-N32	1	0.031 in (0.8 mm)	0.197 in (5 mm)	No	e0	40	260 °C (500 °F)	0.197 in (5 mm)
5962-9554901NXX	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	-18 V	10 mV	20 nA	Yes	2	CMOS	MIL-PRF-38535 Class N	400 μA			5 V		Small Outline		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)	Palladium	Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	Yes	e4			0.193 in (4.9 mm)
TLC393CPWG4	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	2	CMOS		50 μA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	18 V	0.026 in (0.65 mm)	70 °C (158 °F)		2.5 µs	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
TL510CJG	Texas Instruments	Comparator	Commercial	Through-Hole	8	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T8				No
LM139AJ-N	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic		4 mV		No	4	BIPOLAR		2 mA			5 V	5 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	100 nA	1.3 µs		-55 °C (-67 °F)		Dual	R-XDIP-T14				No
LM111FH/883B	Texas Instruments	Comparator	Military	No Lead	20	QCCN	Square		Ceramic		4 mV		Yes		BIPOLAR	MIL-STD-883 Class B (Modified)		-15 V		15 V	±15 V	Chip Carrier	LCC20,.35SQ	Comparators		0.05 in (1.27 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Quad	S-XQCC-N20				No
5962R9452603V9A	Texas Instruments	Comparator	Military	No Lead	8	DIE	Rectangular	100k Rad(Si)		0 V	4 mV	-300 nA	Yes	2	BIPOLAR	MIL-PRF-38535 Class V	1 mA			5 V		Uncased Chip		Comparators	36 V		125 °C (257 °F)	100 nA	800 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)		Upper	R-XUUC-N8	1		0.033 in (0.8382 mm)	Yes				0.034 in (0.8636 mm)
TL712CPW	Texas Instruments	Comparator	Commercial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		1 mV		Yes	1	BIPOLAR		20 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	SSOP8,.3	Comparators	7 V	0.026 in (0.65 mm)	70 °C (158 °F)		25 ns	3-State	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
PLV7031QDCKRQ1	Texas Instruments	Comparator	Automotive	Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy		8 mV	2 pA	Yes	1		AEC-Q100	900 nA			5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08		7 V	0.026 in (0.65 mm)	125 °C (257 °F)		3 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)					0.079 in (2 mm)
LM2903JG	Texas Instruments	Comparator	Automotive	Through-Hole	8	DIP	Rectangular		Ceramic, Glass-Sealed		15 mV	500 nA	No	2	BIPOLAR		2.5 mA			5 V	5 V	In-Line	DIP8,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)	250 nA	1.3 µs	Open-Collector	-40 °C (-40 °F)		Dual	R-GDIP-T8		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No				0.378 in (9.6 mm)
TLV2393IDR	Texas Instruments	Comparator	Industrial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	2	BIPOLAR		1.6 mA			3 V	3/5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	105 °C (221 °F)	250 nA	450 ns	Open-Collector	-40 °C (-40 °F)		Dual	R-PDSO-G8		0.069 in (1.75 mm)	0.154 in (3.9 mm)	No				0.193 in (4.9 mm)
TL714CDRE4	Texas Instruments	Comparator	Commercial	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy				Yes	1	BIPOLAR		12 mA			5 V	5 V	Small Outline	SOP8,.25	Comparators	7 V	0.05 in (1.27 mm)	70 °C (158 °F)		6 ns	Totem Pole	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
TLC374MJB	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic, Glass-Sealed		10 mV	20 nA	No	4	CMOS	MIL-STD-883	600 μA		Tube	5 V	5 V	In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	125 °C (257 °F)	30 pA	650 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin/Lead	Dual	R-GDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)	No	e0			0.77 in (19.56 mm)
V62/06675-01XE	Texas Instruments	Comparator	Military	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy	0 V	5 mV	20 nA	Yes	2	CMOS	MIL-STD-883	300 μA	0 V	Tape And Reel	5 V	5 V	Small Outline	SOP8,.25	Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)	30 pA	650 ns	Open-Collector, Open-Drain	-55 °C (-67 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.193 in (4.9 mm)
SN52506J	Texas Instruments	Comparator	Military	Through-Hole	14	DIP	Rectangular		Ceramic				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	125 °C (257 °F)				-55 °C (-67 °F)		Dual	R-XDIP-T14				No
LM306J4	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Ceramic				No	1	BIPOLAR						12,-3/-12 V	In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-XDIP-T14
TLC339CDG4	Texas Instruments	Comparator	Commercial	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy		6.5 mV	600 pA	Yes	4	CMOS		100 μA			5 V	5 V	Small Outline	SOP14,.25	Comparators	18 V	0.05 in (1.27 mm)	70 °C (158 °F)		2.5 µs	Open-Drain	0 °C (32 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LMV7251M5X	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy		8 mV		Yes	1	BICMOS					2.7 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	5.5 V	0.037 in (0.95 mm)	85 °C (185 °F)		730 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.057 in (1.45 mm)	0.063 in (1.6 mm)					0.114 in (2.9 mm)
TLV9022PWR	Texas Instruments	Comparator		Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy		2 mV		Yes	2			70 μA			5 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25		6 V	0.026 in (0.65 mm)	125 °C (257 °F)		150 ns	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)		e4		260 °C (500 °F)	0.173 in (4.4 mm)
TL3116IPWG4	Texas Instruments	Comparator	Industrial	Gull Wing	8	TSSOP	Rectangular		Plastic/Epoxy	-7 V	3.5 mV	1.5 uA	Yes	1	BIPOLAR		15 mA	-5 V		5 V	5/±5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP8,.25	Comparators	7 V	0.026 in (0.65 mm)	85 °C (185 °F)	1.1 uA	9.9 ns		-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G8	1	0.047 in (1.2 mm)	0.118 in (3 mm)	No	e4	30 s	260 °C (500 °F)	0.173 in (4.4 mm)
LM119WG/883	Texas Instruments	Comparator	Military	Gull Wing	10	SOP	Rectangular			-18 V	6.8 mV	950 nA	Yes	2	BIPOLAR	MIL-STD-883						Small Outline		Comparators	18 V	0.05 in (1.27 mm)	125 °C (257 °F)			Open-Collector	-55 °C (-67 °F)		Dual	R-XDSO-G10		0.092 in (2.33 mm)	0.241 in (6.12 mm)					0.27 in (6.86 mm)
TLV3501DBV	Texas Instruments	Comparator	Automotive	Gull Wing	6	SOP	Rectangular		Plastic/Epoxy		6.5 mV	10 pA	Yes	1			5 mA			5 V	3/5 V	Small Outline	TSOP6,.11,37	Comparators	5.5 V	0.037 in (0.95 mm)	125 °C (257 °F)	10 pA	7.5 ns	Push-Pull	-40 °C (-40 °F)		Dual	R-PDSO-G6				No
SE529K	Texas Instruments	Comparator	Commercial	Through-Hole	10		Round		Metal	-16 V	5 mV	30 uA	No	2	BIPOLAR			-10 V		10 V	5,±10 V	Cylindrical	CAN10,.23	Comparators	16 V		70 °C (158 °F)		14 µs	Push-Pull	0 °C (32 °F)		Bottom	O-MBCY-T10	1			No
LM239PWG4	Texas Instruments	Comparator	Other	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	4	BIPOLAR		2 mA			5 V	5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	36 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	1.3 µs	Open-Collector	-25 °C (-13 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
TLV3404IDRG4	Texas Instruments	Comparator	Automotive	Gull Wing	14	SOP	Rectangular		Plastic/Epoxy	0 V	4.4 mV	1.5 nA	Yes	4			3.8 μA	0 V		5 V	±1.35/±8/2.7/16 V	Small Outline	SOP14,.25	Comparators	17 V	0.05 in (1.27 mm)	125 °C (257 °F)	250 pA	175 µs	Open-Drain	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.069 in (1.75 mm)	0.154 in (3.9 mm)	No	e4	30 s	260 °C (500 °F)	0.341 in (8.65 mm)
LMP7300MAX	Texas Instruments	Comparator	Automotive	Gull Wing	8	SOP	Rectangular		Plastic/Epoxy		2 mV	4 nA	Yes	1						5 V		Small Outline		Comparators	13.6 V	0.05 in (1.27 mm)	125 °C (257 °F)		12 µs	Open-Collector	-40 °C (-40 °F)	Tin Lead	Dual	R-PDSO-G8	1	0.069 in (1.753 mm)	0.154 in (3.9 mm)	No	e0	30 s	235 °C (455 °F)	0.193 in (4.9 mm)
5962-01-084-3664	Texas Instruments	Comparator	Commercial	Through-Hole	14	DIP	Rectangular		Plastic/Epoxy				No		BIPOLAR							In-Line	DIP14,.3	Comparators		0.1 in (2.54 mm)	70 °C (158 °F)				0 °C (32 °F)		Dual	R-PDIP-T14				No
TLV1391CDBVRG4	Texas Instruments	Comparator	Commercial	Gull Wing	5	LSSOP	Rectangular		Plastic/Epoxy		9 mV	-400 nA	Yes	1	BIPOLAR		125 μA		Tape And Reel	3 V	3/5 V	Small Outline, Low Profile, Shrink Pitch	TSOP5/6,.11,37	Comparators	7 V	0.037 in (0.95 mm)	70 °C (158 °F)	250 nA	700 ns	Open-Collector	0 °C (32 °F)	Nickel/Palladium/Gold	Dual	R-PDSO-G5	1	0.057 in (1.45 mm)	0.063 in (1.6 mm)	No	e4		260 °C (500 °F)	0.114 in (2.9 mm)
5962R9673802VDA	Texas Instruments	Comparator	Military	Flat		DFP	Rectangular	100k Rad(Si)	Ceramic, Metal-Sealed Cofired	0 V	4 mV	-1 nA	Yes	4	BIPOLAR	MIL-PRF-38535 Class V	2 mA	0 V		5 V		Flatpack		Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)	100 nA		Open-Collector, Open-Drain	-55 °C (-67 °F)	Tin Lead	Dual	R-CDFP-F14	1	0.08 in (2.02 mm)	0.25 in (6.35 mm)	Yes	e0			0.39 in (9.9 mm)
LMV339IPWE4	Texas Instruments	Comparator	Industrial	Gull Wing	14	TSSOP	Rectangular		Plastic/Epoxy		9 mV	400 nA	Yes	4	BIPOLAR		350 μA			5 V	3/5 V	Small Outline, Thin Profile, Shrink Pitch	TSSOP14,.25	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)	250 nA	600 ns	Open-Collector	-40 °C (-40 °F)	Nickel Palladium Gold	Dual	R-PDSO-G14	1	0.047 in (1.2 mm)	0.173 in (4.4 mm)	No	e4	30 s	260 °C (500 °F)	0.197 in (5 mm)
LM119MDE	Texas Instruments	Comparator	Military			DIE				-18 V	6.8 mV	950 nA		2	BIPOLAR	MIL-STD-883	11 mA	-15 V		15 V				Comparators	18 V		125 °C (257 °F)	500 nA	80 ns	Open-Collector	-55 °C (-67 °F)				1			No
NE529K	Texas Instruments	Comparator	Commercial	Through-Hole	10		Round		Metal	-16 V	5 mV	30 uA	No	2	BIPOLAR			-10 V		10 V	5,±10 V	Cylindrical	CAN10,.23	Comparators	16 V		70 °C (158 °F)		14 µs	Push-Pull	0 °C (32 °F)		Bottom	O-MBCY-T10	1			No
LMV7255M7X	Texas Instruments	Comparator	Industrial	Gull Wing	5	TSSOP	Rectangular		Plastic/Epoxy		8 mV		Yes	1	BICMOS					2.7 V		Small Outline, Thin Profile, Shrink Pitch	TSSOP5/6,.08	Comparators	5.5 V	0.026 in (0.65 mm)	85 °C (185 °F)		730 ns	Open-Drain	-40 °C (-40 °F)		Dual	R-PDSO-G5		0.043 in (1.1 mm)	0.049 in (1.25 mm)					0.079 in (2 mm)
5962-8773901DX	Texas Instruments	Comparator	Military	Flat	14	DFP	Rectangular		Ceramic, Glass-Sealed	0 V	4 mV	-300 nA	Yes	4	BIPOLAR	MIL-STD-883	3 mA	0 V		5 V		Flatpack		Comparators	36 V	0.05 in (1.27 mm)	125 °C (257 °F)		1.3 µs	Open-Collector	-55 °C (-67 °F)	Tin Lead	Dual	R-GDFP-F14		0.08 in (2.03 mm)	0.247 in (6.285 mm)	Yes	e0			0.363 in (9.21 mm)
LM393H	Texas Instruments	Comparator	Commercial	Wire	8		Round		Metal	0 V	9 mV	400 nA	No	2	BIPOLAR			0 V		5 V		Cylindrical		Comparators	36 V		70 °C (158 °F)		1.3 µs	Open-Collector	0 °C (32 °F)		Bottom	O-MBCY-W8
LM319N/A+	Texas Instruments	Comparator		Through-Hole	14	DIP	Rectangular		Plastic/Epoxy	-18 V	8 mV	1 uA	No	2	BIPOLAR		12.5 mA	-15 V		15 V		In-Line	DIP14,.3	Comparators	18 V	0.1 in (2.54 mm)	70 °C (158 °F)	1 uA	80 ns	Open-Collector	0 °C (32 °F)		Dual	R-PDIP-T14		0.2 in (5.08 mm)	0.3 in (7.62 mm)					0.76 in (19.305 mm)

Comparators

Comparators are electronic circuits that compare two input voltages and output a voltage signal that indicates which of the inputs is larger. A comparator is similar to an operational amplifier (op-amp), but it is designed to operate with a limited range of voltage outputs (typically near the power supply rails) and with very high gain.

A comparator typically has two input terminals, a non-inverting (+) input and an inverting (-) input, and one output. When the voltage at the non-inverting input is greater than the voltage at the inverting input, the output of the comparator switches to its maximum positive voltage. Conversely, when the voltage at the inverting input is greater than the voltage at the non-inverting input, the output of the comparator switches to its maximum negative voltage.

Comparators are often used in applications where a precise measurement or detection of voltage level is required, such as in voltage reference circuits, level detectors, and waveform generators. They can also be used to implement digital logic circuits and are frequently used in A/D converters and motor control circuits.

It is worth noting that a comparator output can switch quickly between its high and low states, so they can be sensitive to noise and require careful circuit design to ensure proper operation. In addition, some comparators may include features such as hysteresis, which can help to reduce noise and ensure stable operation in the presence of small fluctuations in the input signals.