Square Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

AD9633BCPZRL7-105

Analog Devices

Analog To Digital Converter, Flash Method

Industrial

No Lead

48

HVQCCN

Square

4

Yes

2 V

105 MHz

1

CMOS

12

0.0391 %

1.8 V

Offset Binary, 2's Complement Binary

1.8 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC48,.27SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

9.5 ns

S-XQCC-N48

3

0.031 in (0.8 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD9642BCPZ-250

Analog Devices

Analog To Digital Converter, Flash Method

Industrial

No Lead

32

HVQCCN

Square

1

Yes

1.75 V

250 MHz

1

CMOS

14

0.0153 %

1.8 V

Offset Binary, 2's Complement Binary, Gray Code

1.8 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC32,.2SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-1.75 V

Serial

-40 °C (-40 °F)

Matte Tin

Quad

4 ns

S-XQCC-N32

3

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADAU1979WBCPZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

40

HVQCCN

Square

4

Yes

1

CMOS

AEC-Q100

24

3.3 V

Binary

1.8,3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC40,.24SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

105 °C (221 °F)

Serial

-40 °C (-40 °F)

Quad

S-XQCC-N40

3

0.031 in (0.8 mm)

0.236 in (6 mm)

No

30 s

260 °C (500 °F)

0.236 in (6 mm)

ADC08DJ3200AAV

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Ball

144

FBGA

Square

Plastic/Epoxy

2

Yes

800 mV

3200 MHz

1

8

1.1 V

Offset Binary, 2's Complement Binary

Grid Array, Fine Pitch

0.031 in (0.8 mm)

85 °C (185 °F)

-800 mV

Serial, Parallel, 8 Bits

-40 °C (-40 °F)

Tin Silver Copper

Bottom

S-PBGA-B144

3

0.076 in (1.94 mm)

0.394 in (10 mm)

Peak-to-peak input voltage range: 0.8 V

e1

30 s

260 °C (500 °F)

0.394 in (10 mm)

ADC122S655CIMM/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

2

Yes

5.5 V

500 kHz

1

12

2.75 mA

0.0244 %

5 V

2's Complement Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

4.5 V

0.02 in (0.5 mm)

105 °C (221 °F)

-1 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

7.5 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADC124S051CIMM

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

4

Yes

5.25 V

500 kHz

1

CMOS

12

0.0269 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

1.625 µs

S-PDSO-G10

1

0.043 in (1.09 mm)

0.118 in (3 mm)

No

e0

260 °C (500 °F)

0.118 in (3 mm)

ADC124S051CIMMX

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

4

Yes

5.25 V

500 kHz

1

CMOS

12

0.0269 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

1.625 µs

S-PDSO-G10

1

0.043 in (1.09 mm)

0.118 in (3 mm)

No

e0

260 °C (500 °F)

0.118 in (3 mm)

ADC12D1000CIUT/NOPB

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Ball

292

HBGA

Square

Plastic/Epoxy

2

Yes

800 mV

1000 MHz

1

12

0.1172 %

1.9 V

Offset Binary, 2's Complement Binary

1.9 V

Grid Array, Heat Sink/Slug

BGA292,20X20,50

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-800 mV

Parallel, Word

-40 °C (-40 °F)

Tin Silver

Track

Bottom

S-PBGA-B292

3

0.102 in (2.58 mm)

1.063 in (27 mm)

No

Peak-to-peak input voltage range: 0.8 V

e2

30 s

250 °C (482 °F)

1.063 in (27 mm)

ADS117L11IRUKR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

No Lead

20

HVQCCN

Square

Plastic/Epoxy

1

Yes

5 V

1 MHz

1

16

2.7 mA

0.0015258 %

5 V

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC20,.12SQ,16

1.65 V

0.016 in (0.4 mm)

125 °C (257 °F)

-1 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQCC-N20

1

0.031 in (0.8 mm)

0.118 in (3 mm)

e4

260 °C (500 °F)

0.118 in (3 mm)

ADS1218Y/250

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

48

TFQFP

Square

Plastic/Epoxy

8

Yes

5.25 V

780 Hz

1

CMOS

24

275 mA

0.0015 %

3 V

Binary

3/5 V

Flatpack, Thin Profile, Fine Pitch

TQFP48,.35SQ

Other Converters

2.7 V

0.02 in (0.5 mm)

85 °C (185 °F)

-1.25 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQFP-G48

2

0.047 in (1.2 mm)

0.276 in (7 mm)

No

e4

30 s

260 °C (500 °F)

0.276 in (7 mm)

ADS1218Y/250G4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

48

TFQFP

Square

Plastic/Epoxy

8

Yes

1.25 V

100 kHz

1

CMOS

24

0.0015 %

3 V

Binary

3/5 V

Flatpack, Thin Profile, Fine Pitch

TQFP48,.35SQ

Other Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-1.25 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQFP-G48

2

0.047 in (1.2 mm)

0.276 in (7 mm)

No

e4

30 s

260 °C (500 °F)

0.276 in (7 mm)

LTC1864IMS8#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

5.25 V

250 kHz

1

16

0.0122 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

3.2 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC2238IUH#TRPBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

32

HVQCCN

Square

Plastic/Epoxy

1

Yes

1 V

65 MHz

1

CMOS

10

0.0488 %

3 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

-1 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

S-PQCC-N32

1

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC2245IUH#TRPBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

32

HVQCCN

Square

Plastic/Epoxy

1

Yes

1.9 V

10 MHz

1

CMOS

14

0.0244 %

3 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

1 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

S-PQCC-N32

1

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

MCP3301T-CI/MS

Microchip Technology

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Square

Plastic/Epoxy

2

Yes

5 V

100 kHz

1

TS 16949

13

450 μA

0.02441 %

5 V

2's Complement Binary

Small Outline

SOP8,.19

0.026 in (0.65 mm)

85 °C (185 °F)

-5 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40 s

260 °C (500 °F)

0.118 in (3 mm)

MCP33111D-05-E/MN

Microchip Technology

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

10

HVSON

Square

Plastic/Epoxy

1

Yes

5.1 V

500 kHz

1

AEC-Q100; TS 16949

12

2 mA

1.8 V

2's Complement Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC10,.12,20

0.02 in (0.5 mm)

125 °C (257 °F)

-5.1 V

Serial

-40 °C (-40 °F)

Dual

1.3 µs

S-PDSO-N10

0.031 in (0.8 mm)

0.118 in (3 mm)

0.118 in (3 mm)

MCP3422A3-E/MS

Microchip Technology

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Square

Plastic/Epoxy

2

Yes

2.048 V

2.4 kHz

1

TS 16949

18

180 μA

0.0035 %

5 V

2's Complement Binary

3/5 V

Small Outline

SOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

40 s

260 °C (500 °F)

0.118 in (3 mm)

PADS117L11IRUKR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

No Lead

20

HVQCCN

Square

Plastic/Epoxy

1

Yes

5 V

1 MHz

1

16

0.0005 %

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC20,.12SQ,16

1.65 V

0.016 in (0.4 mm)

125 °C (257 °F)

Serial

-40 °C (-40 °F)

Quad

S-PQCC-N20

0.031 in (0.8 mm)

0.118 in (3 mm)

0.118 in (3 mm)

TLV2542IDGKR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2

Yes

5.5 V

200 kHz

1

CMOS

12

1.5 mA

0.0244 %

3.3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

SSOP8,.19

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Sample

Dual

3.5 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD1974YSTZ-RL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

4

Yes

192 kHz

1

24

3.3 V

Binary

Flatpack, Low Profile, Fine Pitch

0.02 in (0.5 mm)

105 °C (221 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Quad

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD4000BRMZ-RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.1 V

2 MHz

1

16

0.0015 %

1.8 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

320 ns

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD4696BCPZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

32

HVQCCN

Square

16

Yes

2.875 V

1 MHz

1

16

0.001525 %

5 V

Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC32,.2SQ,20

0.02 in (0.5 mm)

125 °C (257 °F)

-1.2 V

Serial

-40 °C (-40 °F)

Quad

415 ns

S-XQCC-N32

0.031 in (0.8 mm)

0.197 in (5 mm)

0.197 in (5 mm)

AD4696BCPZ-RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

32

HVQCCN

Square

16

Yes

2.875 V

1 MHz

1

16

0.001525 %

5 V

Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC32,.2SQ,20

0.02 in (0.5 mm)

125 °C (257 °F)

-1.2 V

Serial

-40 °C (-40 °F)

Quad

415 ns

S-XQCC-N32

0.031 in (0.8 mm)

0.197 in (5 mm)

0.197 in (5 mm)

AD7134BCPZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Other

No Lead

56

HVQCCN

Square

Plastic/Epoxy

4

Yes

4.096 V

1.496 MHz

1

24

1.8 V

2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC56,.31SQ,20

0.02 in (0.5 mm)

85 °C (185 °F)

-4.096 V

Two's Complement

0 °C (32 °F)

Sample

Quad

S-PQCC-N56

3

0.031 in (0.8 mm)

0.315 in (8 mm)

30 s

260 °C (500 °F)

0.315 in (8 mm)

AD7641BSTZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

2.73 V

2 MHz

1

CMOS

18

0.0013 %

2.5 V

Binary, 2's Complement Binary

2.5,2.5/3.3 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-1.8 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

520 ns

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7655SCP-EP-RL

Analog Devices

Analog To Digital Converter, Successive Approximation

Military

No Lead

48

HVQCCN

Square

4

Yes

5.25 V

1 MHz

1

16

0.0092 %

5 V

Binary

3/5,5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC48,.27SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial, Parallel, Word

-55 °C (-67 °F)

Sample

Quad

875 ns

S-XQCC-N48

0.039 in (1 mm)

0.276 in (7 mm)

No

0.276 in (7 mm)

AD7677ASTZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

2.5 V

1 MHz

1

16

0.0015 %

5 V

Binary, 2's Complement Binary

Flatpack, Low Profile, Fine Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-2.5 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Quad

1.25 µs

S-PQFP-G48

3

0.067 in (1.7 mm)

0.276 in (7 mm)

No

e3

260 °C (500 °F)

0.276 in (7 mm)

AD7680ARMZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

100 kHz

1

16

0.0053 %

3.6 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

9.6 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD7680BRMZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

100 kHz

1

16

0.0053 %

3.6 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

9.6 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

AD7685ARMRL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

250 kHz

1

CMOS

16

0.0092 %

5 V

Binary

3/5,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Tin Lead

Track

Dual

2.2 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e0

0.118 in (3 mm)

AD7871JPZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

J Bend

28

QCCJ

Square

Plastic/Epoxy

1

Yes

3 V

83 kHz

1

CMOS

14

5 V

2's Complement Binary

±5 V

-5 V

Chip Carrier

LDCC28,.5SQ

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

-3 V

Serial, Parallel, 8 Bits, Parallel, Word

0 °C (32 °F)

Matte Tin

Track

Quad

10.5 µs

S-PQCC-J28

3

0.178 in (4.51 mm)

0.453 in (11.5062 mm)

No

e3

260 °C (500 °F)

0.453 in (11.5062 mm)

AD7938BCPZ-6REEL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

32

HVQCCN

Square

8

Yes

5 V

625 kHz

1

12

1.5 mA

0.0244 %

3 V

Binary, 2's Complement Binary

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC32,.2SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Quad

S-XQCC-N32

3

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

0.197 in (5 mm)

AD7951BSTZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

10.1 V

1 MHz

1

CMOS

14

0.0061 %

5 V

Binary, 2's Complement Binary

5,±15 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-10.1 V

Parallel, 8 Bits, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.35 µs

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7952BSTZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

5 V

1 MHz

1

CMOS

14

0.0061 %

5 V

Binary, 2's Complement Binary

5,±15 V

Flatpack, Low Profile, Fine Pitch

LCC48,.27SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-5 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.35 µs

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7952BSTZRL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

5 V

1 MHz

1

CMOS

14

0.0061 %

5 V

Binary, 2's Complement Binary

5,±15 V

Flatpack, Low Profile, Fine Pitch

LCC48,.27SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-5 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.35 µs

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7980ARMZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.1 V

1 MHz

1

16

0.0038 %

2.5 V

Binary

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

710 ns

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD9208BBPZ-3000

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Ball

196

HBGA

Square

Plastic/Epoxy

4

Yes

1.7 V

3000 MHz

1

14

0.1282 %

975 mV

Offset Binary, 2's Complement Binary

Grid Array, Heat Sink/Slug

0.031 in (0.8 mm)

85 °C (185 °F)

-1.7 V

Serial

-40 °C (-40 °F)

Sample

Bottom

S-PBGA-B196

3

0.06 in (1.53 mm)

0.472 in (12 mm)

30 s

260 °C (500 °F)

0.472 in (12 mm)

AD9228BCPZ-65

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

48

HVQCCN

Square

4

Yes

2 V

65 MHz

1

CMOS

12

0.0244 %

1.8 V

Offset Binary, 2's Complement Binary

1.8 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC48,.27SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

S-XQCC-N48

3

0.039 in (1 mm)

0.276 in (7 mm)

No

e3

260 °C (500 °F)

0.276 in (7 mm)

AD9248BSTZ-40

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

64

LFQFP

Square

Plastic/Epoxy

1

Yes

2 V

40 MHz

2

CMOS

14

0.0275 %

3 V

Offset Binary, 2's Complement Binary

2.5,3 V

Flatpack, Low Profile, Fine Pitch

QFP64,.35SQ,16

Analog to Digital Converters

0.016 in (0.4 mm)

85 °C (185 °F)

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

S-PQFP-G64

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD9266BCPZ-80

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

32

HVQCCN

Square

1

Yes

2 V

80 MHz

1

CMOS

16

0.0094 %

1.8 V

Offset Binary, 2's Complement Binary, Gray Code

1.8 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC32,.2SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

12.5 ns

S-XQCC-N32

3

0.039 in (1 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADC122S051CIMMX/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2

Yes

5.25 V

500 kHz

1

CMOS

AEC-Q100

12

2.4 mA

0.0269 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

4.0625 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADC12D1000RFIUT/NOPB

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Ball

292

HBGA

Square

Plastic/Epoxy

2

Yes

800 mV

1000 MHz

1

CMOS

12

2.105 A

0.177 %

1.9 V

Binary, Offset Binary, 2's Complement Binary

1.9 V

Grid Array, Heat Sink/Slug

BGA292,20X20,50

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-800 mV

Parallel, Word

-40 °C (-40 °F)

Tin Silver

Track

Bottom

S-PBGA-B292

3

0.102 in (2.58 mm)

1.063 in (27 mm)

No

Peak-to-peak input voltage range: 0.8 V

e2

30 s

250 °C (482 °F)

1.063 in (27 mm)

ADC12D1800RFIUT

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Ball

292

HBGA

Square

Plastic/Epoxy

1

Yes

800 mV

3600 MHz

1

12

2.481 A

1.9 V

Offset Binary, 2's Complement Binary

1.9 V

Grid Array, Heat Sink/Slug

BGA292,20X20,50

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-800 mV

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Track

Bottom

S-PBGA-B292

3

0.102 in (2.58 mm)

1.063 in (27 mm)

No

Peak-to-peak input voltage range: 0.8 V

e0

20 s

220 °C (428 °F)

1.063 in (27 mm)

ADC12DJ2700AAVT

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Ball

144

FBGA

Square

Plastic/Epoxy

2

Yes

1.04 V

2700 MHz

1

12

950 mA

1.1 V

Offset Binary, 2's Complement Binary

Grid Array, Fine Pitch

BGA144,12X12,32

0.031 in (0.8 mm)

85 °C (185 °F)

-1.04 V

Serial, Parallel, Word

-40 °C (-40 °F)

Tin Silver Copper

Bottom

S-PBGA-B144

3

0.076 in (1.94 mm)

0.394 in (10 mm)

Peak-to-peak input voltage range: 0.8 V

e1

30 s

260 °C (500 °F)

0.394 in (10 mm)

ADC3541IRSBR

Texas Instruments

Analog To Digital Converter, Proprietary Method

No Lead

40

HVQCCN

Square

Plastic/Epoxy

1

Yes

2.25 V

10 MHz

1

14

31 mA

0.012817 %

1.8 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC40,.20SQ,16

0.016 in (0.4 mm)

105 °C (221 °F)

-2.25 V

Serial, Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQCC-N40

3

0.031 in (0.8 mm)

0.197 in (5 mm)

Peak-to-peak input voltage range: 2.25 V

e4

260 °C (500 °F)

0.197 in (5 mm)

ADC3541IRSBT

Texas Instruments

Analog To Digital Converter, Proprietary Method

No Lead

40

HVQCCN

Square

Plastic/Epoxy

1

Yes

2.25 V

10 MHz

1

14

31 mA

0.012817 %

1.8 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC40,.20SQ,16

0.016 in (0.4 mm)

105 °C (221 °F)

-2.25 V

Serial, Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQCC-N40

3

0.031 in (0.8 mm)

0.197 in (5 mm)

Peak-to-peak input voltage range: 2.25 V

e4

260 °C (500 °F)

0.197 in (5 mm)

ADS1014BQDGSRQ1

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

3.3 kHz

1

AEC-Q100

12

300 μA

0.0122 %

3.3 V

2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

2 V

0.02 in (0.5 mm)

125 °C (257 °F)

-256 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold/Silver

Dual

S-PDSO-G10

2

0.043 in (1.1 mm)

0.118 in (3 mm)

e4

260 °C (500 °F)

0.118 in (3 mm)

ADS122U04IRTER

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

16

HVQCCN

Square

Plastic/Epoxy

4

Yes

5.05 V

2 kHz

1

24

510 μA

0.0015 %

2.5 V

Binary, 2's Complement Binary

-2.5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

2.3 V

0.02 in (0.5 mm)

125 °C (257 °F)

-750 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

520 µs

S-PQCC-N16

2

0.031 in (0.8 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.