Analog Devices Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

AD7124-4BRUZ-RL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

2.5 V

19.2 kHz

1

24

0.0015 %

3 V

Offset Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

125 °C (257 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Dual

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

AD7689ACPZRL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

20

HVQCCN

Square

8

Yes

2.9 V

250 kHz

1

CMOS

16

0.0061 %

5 V

Binary, 2's Complement Binary

3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC20,.16SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

250 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Quad

2.2 µs

S-XQCC-N20

3

0.039 in (1 mm)

0.157 in (4 mm)

No

e3

260 °C (500 °F)

0.157 in (4 mm)

AD7708BRUZ-REEL7

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

10

Yes

2.56 V

1

CMOS

16

0.0015 %

3 V

Binary, Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP28,.25

Other Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-2.56 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G28

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.382 in (9.7 mm)

AD7794CRUZ-REEL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

6

Yes

1

CMOS

24

0.0015 %

3 V

Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

LTC1855IG#TRPBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

8

Yes

10 V

100 kHz

1

14

0.0092 %

5 V

2's Complement Binary

Small Outline, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

5 µs

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

AD7710ARZ-REEL7

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

24

SOP

Rectangular

Plastic/Epoxy

2

Yes

2.5 V

1

CMOS

24

0.003 %

5 V

Binary, Offset Binary

±5/10 V

-5 V

Small Outline

SOP24,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

R-PDSO-G24

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.606 in (15.4 mm)

AD8275ARMZ-R7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

12 V

1

16

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

-12.3 V

-40 °C (-40 °F)

Matte Tin

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC1867LCGN#TRPBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Commercial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

8

Yes

1.25 V

175 kHz

1

16

0.0061 %

2.7 V

Binary, 2's Complement Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

70 °C (158 °F)

-1.25 V

Serial

0 °C (32 °F)

Matte Tin

Sample

Dual

3.7 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

MAX11410ATI+T

Analog Devices

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

28

HVQCCN

Square

10

Yes

2.5 V

1.9 kHz

1

BICMOS

24

0.0012 %

3.3 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.016 in (0.4 mm)

125 °C (257 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Quad

S-XQCC-N28

1

0.031 in (0.8 mm)

0.157 in (4 mm)

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

AD7923BRUZ-REEL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

2.5 V

200 kHz

1

12

0.0244 %

3 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

800 ns

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD977ACRSZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

3

Yes

10 V

200 kHz

1

BICMOS

16

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

4 µs

R-PDSO-G28

3

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

260 °C (500 °F)

0.402 in (10.2 mm)

AD7730BRZ-REEL7

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

24

SOP

Rectangular

Plastic/Epoxy

2

Yes

800 mV

1

CMOS

19

0.0018 %

5 V

Binary

3/5,5 V

Small Outline

SOP24,.4

Other Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-800 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G24

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.606 in (15.4 mm)

AD7928BRUZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5 V

1 MHz

1

12

0.0244 %

3 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

800 ns

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

AD7998BRUZ-0

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.5 V

188 kHz

1

12

0.0244 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

MAX11900ETP+

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

20

HVQCCN

Square

1

Yes

3.6 V

1 MHz

1

CMOS

16

50 mA

0.00076 %

1.8 V

Offset Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC20,.16SQ,20

0.02 in (0.5 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Quad

S-XQCC-N20

1

0.031 in (0.8 mm)

0.157 in (4 mm)

No

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

AD7730BRZ-REEL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

24

SOP

Rectangular

Plastic/Epoxy

2

Yes

800 mV

1

CMOS

19

0.0018 %

5 V

Binary

3/5,5 V

Small Outline

SOP24,.4

Other Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-800 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G24

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.606 in (15.4 mm)

AD9460BSVZ-105

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

100

HTFQFP

Square

Plastic/Epoxy

1

Yes

3.4 V

105 MHz

1

16

0.0092 %

3.3 V

Offset Binary, 2's Complement Binary

3.3,5 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

TQFP100,.63SQ

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Quad

S-PQFP-G100

3

0.047 in (1.2 mm)

0.551 in (14 mm)

No

e3

30 s

260 °C (500 °F)

0.551 in (14 mm)

LTC1286CS8#TRPBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.05 V

12.5 kHz

1

CMOS

12

500 μA

0.0488 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

70 °C (158 °F)

-50 mV

Serial

0 °C (32 °F)

Matte Tin

Sample

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LTC2246IUH#PBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

32

HVQCCN

Square

Plastic/Epoxy

1

Yes

1.9 V

25 MHz

1

CMOS

14

0.0244 %

3 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

1 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

S-PQCC-N32

1

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC2400IS8#TR

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

6.1875 V

1

CMOS

24

3.3 V

Binary

Small Outline

0.05 in (1.27 mm)

85 °C (185 °F)

-12.5 mV

Serial

-40 °C (-40 °F)

Tin Lead

Dual

163.2 ms

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

0.193 in (4.9 mm)

AD7194BCPZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

32

HVQCCN

Square

8

Yes

5 V

48 kHz

1

24

0 %

5 V

Binary, Offset Binary

3/5,3.3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC32,.2SQ,20

Other Converters

0.02 in (0.5 mm)

105 °C (221 °F)

-5 V

Serial

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N32

3

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD7685CRMZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

250 kHz

1

CMOS

16

0.0031 %

5 V

Binary

3/5,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

2.2 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

AD7193BCPZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

32

HVQCCN

Square

4

Yes

5 V

4.8 kHz

1

24

0 %

5 V

Binary, Offset Binary

3/5,3.3/5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC32,.2SQ,20

Other Converters

0.02 in (0.5 mm)

105 °C (221 °F)

-5 V

Serial

-40 °C (-40 °F)

Matte Tin

Quad

S-XQCC-N32

3

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD7891ASZ-1

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

44

QFP

Square

Plastic/Epoxy

8

Yes

10 V

454.5 kHz

1

CMOS

12

0.0244 %

5 V

Binary, 2's Complement Binary

5 V

Flatpack

QFP44,.57SQ,32

Analog to Digital Converters

0.031 in (0.8 mm)

85 °C (185 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Quad

1.6 µs

S-PQFP-G44

3

0.096 in (2.45 mm)

0.394 in (10 mm)

No

e3

30 s

260 °C (500 °F)

0.394 in (10 mm)

LTC1865IMS#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

2

Yes

5.25 V

250 kHz

1

16

0.0122 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

3.2 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD7606C-18BSTZ-RL

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

64

LFQFP

Square

Plastic/Epoxy

8

Yes

20 V

1 MHz

1

18

50 mA

0.00267 %

5 V

Binary, 2's Complement Binary

Flatpack, Low Profile, Fine Pitch

QFP64,.47SQ,20

0.02 in (0.5 mm)

125 °C (257 °F)

-20 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin - annealed

Quad

256 µs

S-PQFP-G64

3

0.063 in (1.6 mm)

0.394 in (10 mm)

e3

30 s

260 °C (500 °F)

0.394 in (10 mm)

LTC2484IDD#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

10

HVSON

Square

Plastic/Epoxy

1

Yes

5.5 V

7.5 Hz

1

CMOS

24

0.001 %

5 V

Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

163.5 ms

S-PDSO-N10

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD7193BRUZ-REEL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

28

HTSSOP

Rectangular

Plastic/Epoxy

4

Yes

5 V

4.8 kHz

1

24

0 %

5 V

Binary, Offset Binary

3/5,3.3/5 V

Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch

TSSOP28,.25

Other Converters

0.026 in (0.65 mm)

105 °C (221 °F)

-5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G28

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.382 in (9.7 mm)

AD7813YRUZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

3 V

400 kHz

1

CMOS

10

0.0977 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

105 °C (221 °F)

0 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Matte Tin

Track

Dual

2.3 µs

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD9467BCPZ-250

Analog Devices

Analog To Digital Converter, Flash Method

Industrial

No Lead

72

HVQCCN

Square

1

Yes

2.5 V

250 MHz

1

BICMOS

16

0.0145 %

1.8 V

Offset Binary, 2's Complement Binary, Gray Code

1.8,3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC72,.39SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2.5 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Quad

4 ns

S-XQCC-N72

3

0.035 in (0.9 mm)

0.394 in (10 mm)

No

e3

30 s

260 °C (500 °F)

0.394 in (10 mm)

AD7616BSTZ-RL

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

80

LQFP

Square

16

Yes

10 V

1

16

0.0031 %

5 V

Binary

Flatpack, Low Profile

0.026 in (0.65 mm)

125 °C (257 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Quad

S-XQFP-G80

3

0.063 in (1.6 mm)

0.551 in (14 mm)

e3

30 s

260 °C (500 °F)

0.551 in (14 mm)

AD7794CRUZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

6

Yes

1

CMOS

24

0.0015 %

3 V

Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

LTC1863LIGN#PBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

8

Yes

1.25 V

175 kHz

1

12

0.0244 %

2.7 V

Binary, 2's Complement Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

85 °C (185 °F)

-1.25 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

3.7 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

AD7864ASZ-1REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

44

QFP

Square

Plastic/Epoxy

4

Yes

10 V

130 kHz

1

12

0.0244 %

5 V

2's Complement Binary

5 V

Flatpack

QFP44,.57SQ,32

Analog to Digital Converters

0.031 in (0.8 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Quad

1.65 µs

S-PQFP-G44

3

0.096 in (2.45 mm)

0.394 in (10 mm)

No

e3

30 s

260 °C (500 °F)

0.394 in (10 mm)

AD7665ASTZRL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

4

Yes

10 V

570 kHz

1

CMOS

16

0.0038 %

5 V

Binary, 2's Complement Binary

3/5,5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1 ms

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7683ARMZRL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

100 kHz

1

CMOS

16

0.0092 %

2.7 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC1865ACMS#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

2

Yes

5.25 V

250 kHz

1

16

0.0092 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Matte Tin

Sample

Dual

3.2 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD7723BSZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

44

QFP

Square

Plastic/Epoxy

1

Yes

5 V

1.2 MHz

1

CMOS

16

5 V

2's Complement Binary

5 V

Flatpack

QFP44,.57SQ,32

Analog to Digital Converters

0.031 in (0.8 mm)

85 °C (185 °F)

0 mV

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

S-PQFP-G44

3

0.096 in (2.45 mm)

0.394 in (10 mm)

No

e3

30 s

260 °C (500 °F)

0.394 in (10 mm)

AD7891ASZ-1REEL

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

44

QFP

Square

Plastic/Epoxy

8

Yes

10 V

454.5 kHz

1

CMOS

12

0.0244 %

5 V

Binary, 2's Complement Binary

5 V

Flatpack

QFP44,.57SQ,32

Analog to Digital Converters

0.031 in (0.8 mm)

85 °C (185 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Quad

1.6 µs

S-PQFP-G44

3

0.096 in (2.45 mm)

0.394 in (10 mm)

No

e3

30 s

260 °C (500 °F)

0.394 in (10 mm)

AD7621ASTZRL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

2.5 V

3 MHz

1

CMOS

16

0.0061 %

2.5 V

Binary, 2's Complement Binary

2.5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2.5 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Quad

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD977ACRZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

3

Yes

10 V

200 kHz

1

BICMOS

16

5 V

Binary, 2's Complement Binary

5 V

Small Outline

SOP20,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

4 µs

R-PDSO-G20

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

AD7367BRUZ-RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

10 V

1 MHz

2

CMOS

14

0.0214 %

16.5 V

2's Complement Binary

5,±12/±15 V

-16.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

680 ns

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

AD7686BRMZRL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

500 kHz

1

CMOS

16

0.0046 %

5 V

Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

1.6 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

LTC1857CG#TR

Analog Devices

Analog To Digital Converter, Proprietary Method

Commercial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

8

Yes

10 V

100 kHz

1

12

0.0244 %

5 V

Offset Binary, 2's Complement Binary

Small Outline, Shrink Pitch

0.026 in (0.65 mm)

70 °C (158 °F)

-10 V

Serial

0 °C (32 °F)

Tin Lead

Sample

Dual

5 µs

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e0

0.402 in (10.2 mm)

AD7191BRUZ-REEL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5 V

4.8 kHz

1

24

0.001 %

5 V

Binary, Offset Binary

3/5,3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

105 °C (221 °F)

-5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

MAX1037EKA+T

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

4

Yes

2.171 V

188 kHz

1

BICMOS

8

0.3906 %

3 V

Binary, 2's Complement Binary

3/3.3 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

6.1 µs

R-PDSO-G8

1

0.057 in (1.45 mm)

0.064 in (1.625 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

AD7656YSTZ-1

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

64

LFQFP

Square

Plastic/Epoxy

6

Yes

10 V

250 kHz

1

CMOS

16

0.0046 %

5 V

2's Complement Binary

5,±5/±15 V

Flatpack, Low Profile, Fine Pitch

QFP64,.47SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

125 °C (257 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Quad

3.1 µs

S-PQFP-G64

3

0.063 in (1.6 mm)

0.394 in (10 mm)

No

e3

260 °C (500 °F)

0.394 in (10 mm)

LTC2400IS8

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

6.1875 V

1

CMOS

24

3.3 V

Binary

Small Outline

0.05 in (1.27 mm)

85 °C (185 °F)

-12.5 mV

Serial

-40 °C (-40 °F)

Tin/Lead

Dual

163.2 ms

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

20 s

235 °C (455 °F)

0.193 in (4.9 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.