Analog Devices Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

LTC1865CS8#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

2

Yes

5.25 V

250 kHz

1

16

0.0122 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Matte Tin

Sample

Dual

3.2 µs

R-PDSO-G8

1

0.069 in (1.752 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.903 mm)

LTC2493CDE#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Commercial

No Lead

14

HVSON

Rectangular

Plastic/Epoxy

4

Yes

2.75 V

1

CMOS

24

0.001 %

5 V

Binary, 2's Complement Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

70 °C (158 °F)

50 mV

Serial

0 °C (32 °F)

Matte Tin

Dual

163.5 ms

R-PDSO-N14

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

AD7291BCPZ-RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

20

HVQCCN

Square

8

Yes

2.5 V

22.22 kHz

1

12

1 %

3 V

Binary, 2's Complement Binary

3/3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC20,.16SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Quad

S-XQCC-N20

3

0.031 in (0.8 mm)

0.157 in (4 mm)

No

e3

40 s

260 °C (500 °F)

0.157 in (4 mm)

AD7466BRTZ-R2

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

1.8 V

100 kHz

1

CMOS

12

0.0366 %

1.8 V

Binary

1.8/3.3 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

0.037 in (0.95 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

4.7 µs

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LTC2487IDE#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

14

HVSON

Rectangular

Plastic/Epoxy

4

Yes

5.5 V

1

16

0.002 %

5 V

2's Complement Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Dual

163.5 ms

R-PDSO-N14

1

0.031 in (0.8 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.157 in (4 mm)

LTC2433-1IMS#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.8 V

1

16

0.0019 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-300 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

149.6 ms

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

MAX11645EUA+T

Analog Devices

Digital To Analog Converter

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

1.064 V

94.4 kHz

1

BICMOS

12

0.0244 %

3 V

2's Complement Binary

3/3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-1.064 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

7.5 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD1674JRZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

111 kHz

1

BICMOS

12

18 mA

0.0244 %

15 V

Binary

5,±12/±15 V

-15 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

-10 V

Parallel, Word

0 °C (32 °F)

Matte Tin

Sample

Dual

10 µs

R-PDSO-G28

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e3

40 s

260 °C (500 °F)

0.705 in (17.9 mm)

AD7324BRUZ-REEL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

10 V

1 MHz

1

CMOS

12

0.0269 %

5 V

Binary, 2's Complement Binary

3/5,±12/±16.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

800 ns

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD7655ASTZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

HLFQFP

Square

Plastic/Epoxy

4

Yes

5 V

1 MHz

1

16

0.0092 %

5 V

Binary

3/5,5 V

Flatpack, Heat Sink/Slug, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial, Parallel, 8 Bits, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.25 µs

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

LTC2498IUHF#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

38

HVQCCN

Rectangular

Plastic/Epoxy

16

Yes

5.5 V

1

CMOS

24

0 %

5 V

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Quad

81.9 ms

R-PQCC-N38

1

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7291BCPZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

20

HVQCCN

Square

8

Yes

2.5 V

22.22 kHz

1

12

1 %

3 V

Binary, 2's Complement Binary

3/3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC20,.16SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Quad

S-XQCC-N20

3

0.031 in (0.8 mm)

0.157 in (4 mm)

No

e3

40 s

260 °C (500 °F)

0.157 in (4 mm)

LTC2420IS8#TRPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

6.1875 V

1

20

0.1375 %

3.3 V

Binary

Small Outline

0.05 in (1.27 mm)

85 °C (185 °F)

-12.5 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

163.44 ms

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LTC2452IDDB#TRMPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

8

HVSON

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

60 Hz

1

CMOS

16

0.0153 %

3 V

Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

-5.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

23 ms

R-PDSO-N8

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD4134BCPZ

Analog Devices

Analog To Digital Converter, Successive Approximation

No Lead

56

HVQCCN

Square

4

Yes

-5 V

1.5 MHz

1

24

105.5 mA

0.0002 %

1.8 V

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC56,.31SQ,20

0.02 in (0.5 mm)

105 °C (221 °F)

-5 V

Serial

-40 °C (-40 °F)

Sample

Quad

S-XQCC-N56

3

0.031 in (0.8 mm)

0.315 in (8 mm)

30 s

260 °C (500 °F)

0.315 in (8 mm)

MAX11604EEE+

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

12

Yes

2.048 V

77 kHz

1

BICMOS

8

0.3906 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

0.025 in (0.635 mm)

85 °C (185 °F)

-2.048 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

6.1 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

AD7476SRTZ-R2

Analog Devices

Analog To Digital Converter, Successive Approximation

Military

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

3 V

1 MHz

1

CMOS

12

0.0366 %

3 V

Binary

2.5/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

0.037 in (0.95 mm)

125 °C (257 °F)

0 mV

Serial

-55 °C (-67 °F)

Nickel Palladium Gold

Track

Dual

1.33 µs

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

LTC1856IG#TRPBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

8

Yes

10 V

100 kHz

1

14

0.0183 %

5 V

2's Complement Binary

Small Outline, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

5 µs

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e3

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

AD7665ASTZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

4

Yes

10 V

570 kHz

1

CMOS

16

0.0038 %

5 V

Binary, 2's Complement Binary

3/5,5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1 ms

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7918BRUZ-REEL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5 V

1 MHz

1

10

0.0488 %

3 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

800 ns

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.256 in (6.5 mm)

AD7678ASTZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

1

Yes

4.096 V

100 kHz

1

CMOS

18

0.001 %

5 V

Binary, 2's Complement Binary

3/5,5 V

Flatpack, Low Profile, Fine Pitch

QFP48,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-4.096 V

Serial, Parallel, 8 Bits, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1.5 µs

S-PQFP-G48

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7701BNZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Through-Hole

20

DIP

Rectangular

Plastic/Epoxy

1

No

2.5 V

16 kHz

1

CMOS

16

0.0015 %

5 V

Binary, Offset Binary

-5 V

In-Line

0.1 in (2.54 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

R-PDIP-T20

0.21 in (5.33 mm)

0.3 in (7.62 mm)

No

e3

0.992 in (25.2 mm)

LTC1867LAIGN#TRPBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

8

Yes

1.25 V

175 kHz

1

16

0.0046 %

2.7 V

Binary, 2's Complement Binary

Small Outline, Shrink Pitch

0.025 in (0.635 mm)

85 °C (185 °F)

-1.25 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

3.7 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.899 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.89 mm)

LTC1867LIGN#WPBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

8

Yes

1.25 V

175 kHz

1

CMOS

AEC-Q100

16

1 mA

0.0061 %

3 V

Binary, 2's Complement Binary

Small Outline, Shrink Pitch

SSOP16,.25

0.025 in (0.635 mm)

85 °C (185 °F)

-1.25 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Sample

Dual

3.7 µs

R-PDSO-G16

1

0.069 in (1.75 mm)

0.154 in (3.899 mm)

e3

30 s

260 °C (500 °F)

0.193 in (4.8895 mm)

AD7918BRUZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5 V

1 MHz

1

10

0.0488 %

3 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

800 ns

R-PDSO-G20

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

260 °C (500 °F)

0.256 in (6.5 mm)

LTC2433-1IMS#TRPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.8 V

1

16

0.0019 %

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-300 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

149.6 ms

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

260 °C (500 °F)

0.118 in (3 mm)

AD7656YSTZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

64

LFQFP

Square

Plastic/Epoxy

6

Yes

12 V

250 kHz

1

CMOS

16

0.0069 %

5 V

2's Complement Binary

5,±5/±15 V

-5 V

Flatpack, Low Profile, Fine Pitch

QFP64,.47SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

125 °C (257 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Matte Tin

Track

Quad

3.1 µs

S-PQFP-G64

3

0.063 in (1.6 mm)

0.394 in (10 mm)

No

e3

260 °C (500 °F)

0.394 in (10 mm)

AD7771BCPZ-RL

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

64

HVQCCN

Square

8

Yes

1.65 V

1

24

0.0015 %

1.65 V

2's Complement Binary

-1.65 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

125 °C (257 °F)

-1 V

Serial

-40 °C (-40 °F)

Quad

3.4 µs

S-XQCC-N64

3

0.031 in (0.8 mm)

0.354 in (9 mm)

30 s

260 °C (500 °F)

0.354 in (9 mm)

LTC1286CS8

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.05 V

12.5 kHz

1

CMOS

12

500 μA

0.0488 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

70 °C (158 °F)

-50 mV

Serial

0 °C (32 °F)

Tin/Lead

Sample

Dual

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e0

20 s

235 °C (455 °F)

0.193 in (4.9 mm)

MAX11040KGUU+T

Analog Devices

Analog To Digital Converter

Industrial

Gull Wing

38

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

2.2 V

3.072 MHz

1

BICMOS

24

0.004 %

2's Complement Binary

3/3.3,3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP38,.25,20

Analog to Digital Converters

0.02 in (0.5 mm)

105 °C (221 °F)

-2.2 V

Serial

-40 °C (-40 °F)

Matte Tin - annealed

Track

Dual

R-PDSO-G38

3

0.043 in (1.1 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.382 in (9.7 mm)

AD7323BRUZ-REEL

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

10 V

500 kHz

1

CMOS

12

0.0269 %

5 V

Binary, 2's Complement Binary

3/5,±15 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

1.6 µs

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC2497IUHF#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

38

HVQCCN

Rectangular

Plastic/Epoxy

16

Yes

5.5 V

1

16

5 V

2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Quad

149.9 ms

R-PQCC-N38

1

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

AD7322BRUZ-REEL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

14

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

10 V

1 MHz

1

CMOS

12

0.0269 %

5 V

Binary, 2's Complement Binary

3/5,-+12/-+16.5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP14,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

800 ns

R-PDSO-G14

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD7686BRMZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

500 kHz

1

CMOS

16

0.0046 %

5 V

Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

1.6 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

AD7691BRMZ

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.25 V

250 kHz

1

18

0.0006 %

5 V

2's Complement Binary

2.5/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-5.25 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

2.2 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

260 °C (500 °F)

0.118 in (3 mm)

AD7894ARZ-10

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

87.5 MHz

1

CMOS

14

0.0122 %

5 V

2's Complement Binary

5 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

5 µs

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e3

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

LTC2335CLX-18#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

8

Yes

10.2525 V

1 MHz

1

CMOS

18

0.0015 %

5 V

2's Complement Binary

Flatpack, Low Profile, Fine Pitch

0.02 in (0.5 mm)

70 °C (158 °F)

-10.2275 V

Serial

0 °C (32 °F)

Matte Tin

Sample

Quad

550 ns

S-PQFP-G48

0.063 in (1.6 mm)

0.276 in (7 mm)

e3

0.276 in (7 mm)

LTC2351IUH-14#PBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

32

HVQCCN

Square

Plastic/Epoxy

6

Yes

1.25 V

1.5 MHz

1

14

0.0183 %

3 V

Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

-1.25 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

S-PQCC-N32

1

0.031 in (0.8 mm)

0.197 in (5 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

AD7798BRUZ-REEL

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

3

Yes

5 V

1

CMOS

16

0.0015 %

3 V

Binary, Offset Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

0.026 in (0.65 mm)

105 °C (221 °F)

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

LTC1403AIMSE-1#PBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

1.25 V

2.8 MHz

1

CMOS

14

0.0244 %

3 V

Binary, 2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-1.25 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

357 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC1403CMSE#PBF

Analog Devices

Analog To Digital Converter, Proprietary Method

Commercial

Gull Wing

10

HTSSOP

Square

Plastic/Epoxy

1

Yes

2.5 V

2.8 MHz

1

12

0.0488 %

3 V

Binary

Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Matte Tin

Sample

Dual

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

AD7991YRJZ-1500RL7

Analog Devices

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

8

LSSOP

Rectangular

Plastic/Epoxy

4

Yes

5.5 V

1

12

0.0244 %

3.3 V

Binary

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSSOP8,.1

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

R-PDSO-G8

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

260 °C (500 °F)

0.114 in (2.9 mm)

AD977ABRS

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

3

Yes

10 V

200 kHz

1

BICMOS

16

0.0031 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Tin Lead

Dual

4 µs

R-PDSO-G28

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e0

30 s

240 °C (464 °F)

0.402 in (10.2 mm)

AD7193BRUZ

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

28

HTSSOP

Rectangular

Plastic/Epoxy

4

Yes

5 V

4.8 kHz

1

24

0 %

5 V

Binary, Offset Binary

3/5,3.3/5 V

Small Outline, Heat Sink/Slug, Thin Profile, Shrink Pitch

TSSOP28,.25

Other Converters

0.026 in (0.65 mm)

105 °C (221 °F)

-5 V

Serial

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G28

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.382 in (9.7 mm)

LTC2411-1IMS#PBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

2.75 V

1

24

5 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-50 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

149.64 ms

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

LTC2450IDC#TRMPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

6

HVSON

Square

Plastic/Epoxy

1

Yes

5.5 V

1

CMOS

16

0.0153 %

3 V

Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

42 ms

S-PDSO-N6

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

LTC2335ILX-16#PBF

Analog Devices

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

LFQFP

Square

Plastic/Epoxy

8

Yes

10.2525 V

1 MHz

1

CMOS

16

0.0015 %

5 V

2's Complement Binary

Flatpack, Low Profile, Fine Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-10.2275 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

550 ns

S-PQFP-G48

0.063 in (1.6 mm)

0.276 in (7 mm)

e3

0.276 in (7 mm)

LTC2450IDC-1#TRMPBF

Analog Devices

Analog To Digital Converter, Delta-Sigma

Industrial

No Lead

6

HVSON

Square

Plastic/Epoxy

1

Yes

5.5 V

1

CMOS

16

0.0153 %

3 V

Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Dual

21 ms

S-PDSO-N6

1

0.031 in (0.8 mm)

0.079 in (2 mm)

No

e3

30 s

260 °C (500 °F)

0.079 in (2 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.