Texas Instruments Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

ADS8405IPFBT

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

TFQFP

Square

Plastic/Epoxy

1

Yes

4.2 V

1.25 MHz

1

CMOS

16

34 mA

0.0061 %

5 V

Binary

3/5 V

Flatpack, Thin Profile, Fine Pitch

TQFP48,.35SQ

Analog to Digital Converters

2.7 V

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Parallel, 8 Bits, Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

650 ns

S-PQFP-G48

2

0.047 in (1.2 mm)

0.276 in (7 mm)

No

e4

30 s

260 °C (500 °F)

0.276 in (7 mm)

ADS8507IBDW

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

40 kHz

1

CMOS

16

0.0023 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

4.75 V

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

20 µs

R-PDSO-G28

2

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.705 in (17.9 mm)

ADS8519IBDBR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

250 kHz

1

CMOS

16

25 mA

0.0023 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

1.65 V

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

4 µs

R-PDSO-G28

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

ADS8578SIPM

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

64

LFQFP

Square

Plastic/Epoxy

8

Yes

10 V

200 kHz

1

14

24 mA

0.0027 %

5 V

2's Complement Binary

Flatpack, Low Profile, Fine Pitch

2.3 V

0.02 in (0.5 mm)

125 °C (257 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Quad

311 µs

S-PQFP-G64

3

0.063 in (1.6 mm)

0.394 in (10 mm)

e4

30 s

260 °C (500 °F)

0.394 in (10 mm)

ADS8598HIPM

Texas Instruments

Analog To Digital Converter, Proprietary Method

Automotive

Gull Wing

64

LFQFP

Square

Plastic/Epoxy

8

Yes

10 V

500 kHz

1

18

30.8 mA

0.0021 %

5 V

2's Complement Binary

Flatpack, Low Profile, Fine Pitch

2.3 V

0.02 in (0.5 mm)

125 °C (257 °F)

-10 V

Serial, Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Quad

126.2 ms

S-PQFP-G64

3

0.057 in (1.45 mm)

0.394 in (10 mm)

e4

30 s

260 °C (500 °F)

0.394 in (10 mm)

ADS8860IDRCT

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

10

HVSON

Square

Plastic/Epoxy

1

Yes

5 V

1 MHz

1

16

2.4 mA

0.0031 %

3 V

Binary

3 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC10,.12,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

710 ns

S-PDSO-N10

2

0.039 in (1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS8881CDRCR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

No Lead

10

HVSON

Square

Plastic/Epoxy

1

Yes

5 V

1 MHz

1

18

2.4 mA

0.0008 %

3 V

Binary

Small Outline, Heat Sink/Slug, Very Thin Profile

1.65 V

0.02 in (0.5 mm)

70 °C (158 °F)

-3 V

Serial

0 °C (32 °F)

Nickel Palladium Gold

Sample

Dual

710 ns

S-PDSO-N10

2

0.039 in (1 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

AMC1106E05DWV

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

50 mV

21 MHz

1

16

9.8 mA

0.0076 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

125 °C (257 °F)

-50 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G8

3

0.11 in (2.8 mm)

0.23 in (5.85 mm)

Peak-to-peak input voltage range: 50 mV

e4

30 s

260 °C (500 °F)

0.295 in (7.5 mm)

DDC264CKZAW

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Commercial

Ball

100

LFBGA

Square

Plastic/Epoxy

64

Yes

1

20

0.00015 %

5 V

Offset Binary

3,5 V

Grid Array, Low Profile, Fine Pitch

BGA100,10X10,32

Analog to Digital Converters

0.031 in (0.8 mm)

70 °C (158 °F)

Serial

0 °C (32 °F)

Tin Silver Copper

Sample

Bottom

S-PBGA-B100

3

0.059 in (1.5 mm)

0.354 in (9 mm)

No

e1

30 s

260 °C (500 °F)

0.354 in (9 mm)

DDC264CKZAWR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Commercial

Ball

100

LFBGA

Square

Plastic/Epoxy

64

Yes

1

20

0.00015 %

5 V

Offset Binary

3,5 V

Grid Array, Low Profile, Fine Pitch

BGA100,10X10,32

Analog to Digital Converters

0.031 in (0.8 mm)

70 °C (158 °F)

Serial

0 °C (32 °F)

Tin Silver Copper

Sample

Bottom

S-PBGA-B100

3

0.059 in (1.5 mm)

0.354 in (9 mm)

No

e1

30 s

260 °C (500 °F)

0.354 in (9 mm)

DDC264CZAW

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Commercial

Ball

100

LFBGA

Square

Plastic/Epoxy

64

Yes

1

20

0.00015 %

5 V

Offset Binary

3,5 V

Grid Array, Low Profile, Fine Pitch

BGA100,10X10,32

Analog to Digital Converters

0.031 in (0.8 mm)

70 °C (158 °F)

Serial

0 °C (32 °F)

Tin Silver Copper

Sample

Bottom

S-PBGA-B100

3

0.059 in (1.5 mm)

0.354 in (9 mm)

No

e1

30 s

260 °C (500 °F)

0.354 in (9 mm)

PADS8353QPWRQ1

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

5 V

600 kHz

1

AEC-Q100

16

0.0061 %

5 V

Binary, 2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Sample

Dual

R-PDSO-G16

0.047 in (1.2 mm)

0.173 in (4.4 mm)

0.197 in (5 mm)

THS1403QPHPEP

Texas Instruments

Analog To Digital Converter, Proprietary Method

Automotive

Gull Wing

48

HTFQFP

Square

Plastic/Epoxy

1

Yes

3.6 V

3 MHz

1

CMOS

14

0.0183 %

3.3 V

Binary, 2's Complement Binary

3.3 V

Flatpack, Heat Sink/Slug, Thin Profile, Fine Pitch

TQFP48,.35SQ

Other Converters

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Sample

Quad

333 ns

S-PQFP-G48

0.047 in (1.2 mm)

0.276 in (7 mm)

No

0.276 in (7 mm)

TLC0820ACDW

Texas Instruments

Analog To Digital Converter, Flash Method

Commercial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

1

Yes

8 V

400 kHz

1

CMOS

8

15 mA

0.3906 %

5 V

Binary

5 V

Small Outline

SOP20,.4

Analog to Digital Converters

4.5 V

0.05 in (1.27 mm)

70 °C (158 °F)

-100 mV

Parallel, 8 Bits

0 °C (32 °F)

Nickel Palladium Gold

Track

Dual

2.5 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

TLC0820AIDW

Texas Instruments

Analog To Digital Converter, Flash Method

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

1

Yes

8 V

400 kHz

1

CMOS

8

15 mA

0.3906 %

5 V

Binary

5 V

Small Outline

SOP20,.4

Analog to Digital Converters

4.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

-100 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

2.5 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

TLC0834CD

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

4

Yes

5.5 V

31 kHz

1

CMOS

8

1.25 mA

0.3906 %

5 V

Binary

5 V

Small Outline

SOP14,.25

Analog to Digital Converters

4.5 V

0.05 in (1.27 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Nickel Palladium Gold

Sample

Dual

32 µs

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

TLC0834CN

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

4

No

5.5 V

31 kHz

1

CMOS

8

1.25 mA

0.3906 %

5 V

Binary

5 V

In-Line

DIP14,.3

Analog to Digital Converters

4.5 V

0.1 in (2.54 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Nickel Palladium Gold

Sample

Dual

32 µs

R-PDIP-T14

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e4

0.76 in (19.305 mm)

TLC1543IDWR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

11

Yes

5.5 V

38 kHz

1

CMOS

10

2.5 mA

0.0977 %

5 V

Binary

5 V

Small Outline

SOP20,.4

Analog to Digital Converters

4.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

21 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

TLC1550IFN

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

J Bend

28

QCCJ

Square

Plastic/Epoxy

1

Yes

5.5 V

164 kHz

1

CMOS

10

0.0488 %

5 V

Binary

5 V

Chip Carrier

LDCC28,.5SQ

Analog to Digital Converters

4.75 V

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

6 µs

S-PQCC-J28

1

0.18 in (4.57 mm)

0.453 in (11.505 mm)

No

e4

30 s

260 °C (500 °F)

0.453 in (11.505 mm)

TLC3544IPWR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

4.07 V

200 kHz

1

CMOS

14

0.0061 %

5 V

Binary, 2's Complement Binary

3/5,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Sample

Dual

2.785 µs

R-PDSO-G20

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

0.256 in (6.5 mm)

TLC4541IDGKG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

200 kHz

1

CMOS

16

0.0038 %

5 V

Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

2.94 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLV1508IDWRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

8

Yes

5.5 V

200 kHz

1

CMOS

10

0.0488 %

3.3 V

Binary

3/5 V

Small Outline

SOP20,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Sample

Dual

3.86 µs

R-PDSO-G20

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

0.504 in (12.8 mm)

TLV2542IDGKRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2

Yes

5.5 V

200 Hz

1

CMOS

12

0.0244 %

3.3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

SSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Sample

Dual

3.5 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLV2542IDRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

2

Yes

5.5 V

200 Hz

1

CMOS

12

0.0244 %

3.3 V

Binary

3/5 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

3.5 µs

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV320ADC3001IYZHR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Ball

16

VFBGA

Square

Plastic/Epoxy

2

Yes

3.6 V

96 kHz

1

16

3.3 V

2's Complement Binary

1.8,3.3 V

Grid Array, Very Thin Profile, Fine Pitch

BGA16,4X4,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

Serial

-40 °C (-40 °F)

Tin Silver Copper

Bottom

S-PBGA-B16

1

0.025 in (0.625 mm)

No

e1

30 s

260 °C (500 °F)

TLV571IDWG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

1.25 MHz

1

CMOS

8

8.5 mA

0.1953 %

3 V

Binary, 2's Complement Binary

3/5 V

Small Outline

SOP24,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

1 µs

R-PDSO-G24

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.606 in (15.4 mm)

ADS1100A1IDBVR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

128 Hz

1

16

150 μA

0.0125 %

5 V

2's Complement Binary

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

2.7 V

0.037 in (0.95 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

5.43478 ms

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADS7043IDCUT

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

8

VSSOP

Rectangular

Plastic/Epoxy

1

Yes

3.6 V

1 MHz

1

12

260 μA

0.0488 %

3 V

Binary

1.8/3.3 V

Small Outline, Very Thin Profile, Shrink Pitch

TSSOP8,.12,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

125 °C (257 °F)

-825 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Sample

Dual

R-PDSO-G8

1

0.035 in (0.9 mm)

0.079 in (2 mm)

No

e4

30 s

260 °C (500 °F)

0.091 in (2.3 mm)

ADS7043IRUGR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

8

VQCCN

Square

Plastic/Epoxy

1

Yes

3.6 V

1 MHz

1

12

260 μA

0.0488 %

3 V

Binary

1.8/3.3 V

Chip Carrier, Very Thin Profile

LCC8,.06SQ,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

125 °C (257 °F)

-825 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Sample

Quad

S-PQCC-N8

1

0.016 in (0.4 mm)

0.059 in (1.5 mm)

No

e4

30 s

260 °C (500 °F)

0.059 in (1.5 mm)

ADS7044IRUGR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

No Lead

8

VQCCN

Square

Plastic/Epoxy

1

Yes

3.6 V

1 MHz

1

12

300 μA

0.0488 %

3 V

2's Complement Binary

1.8/3.3,3 V

Chip Carrier, Very Thin Profile

LCC8,.06SQ,20

Analog to Digital Converters

1.65 V

0.02 in (0.5 mm)

125 °C (257 °F)

-1.65 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Sample

Quad

S-PQCC-N8

1

0.016 in (0.4 mm)

0.059 in (1.5 mm)

No

e4

30 s

260 °C (500 °F)

0.059 in (1.5 mm)

ADS7822U/2K5

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.25 V

200 kHz

1

CMOS

12

0.0488 %

2.7 V

Binary

2.7 V

Small Outline

SOP8,.25

Analog to Digital Converters

4.75 V

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

10 µs

R-PDSO-G8

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ADS8319IDRCR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

10

VSSOP

Square

Plastic/Epoxy

1

Yes

4 V

500 kHz

1

16

0.0038 %

5 V

Binary

3.3,5 V

Small Outline, Very Thin Profile, Shrink Pitch

SOLCC10,.12,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

1.4 µs

S-PDSO-G10

3

0.039 in (1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS8506IBDWR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

40 kHz

1

12

0.011 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

4.75 V

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

15 µs

R-PDSO-G28

2

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.705 in (17.9 mm)

ADS8506IBDWRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

40 kHz

1

12

0.011 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

15 µs

R-PDSO-G28

2

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.705 in (17.9 mm)

TLV1549CDR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

3.6 V

38 kHz

1

CMOS

10

2.5 mA

0.0977 %

3.3 V

Binary

3.3 V

Small Outline

SOP8,.25

Analog to Digital Converters

3 V

0.05 in (1.27 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Nickel Palladium Gold

Sample

Dual

21 µs

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV1549CDRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

3.6 V

1

CMOS

10

0.0977 %

3.3 V

Binary

3.3 V

Small Outline

SOP8,.25

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Nickel Palladium Gold

Sample

Dual

21 µs

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

TLV2545IDGKRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

200 Hz

1

CMOS

12

0.0244 %

3.3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

SSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Sample

Dual

3.5 µs

S-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

30 s

260 °C (500 °F)

0.118 in (3 mm)

TLV320ADC3140IRTWT

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

24

HVQCCN

Square

Plastic/Epoxy

4

Yes

1.9 V

768 kHz

1

32

1.8 V

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQCC-N24

1

0.031 in (0.8 mm)

0.157 in (4 mm)

e4

30 s

260 °C (500 °F)

0.157 in (4 mm)

TLV320ADC6120IRTER

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

No Lead

20

HVQCCN

Square

Plastic/Epoxy

2

Yes

1.9 V

768 kHz

1

32

1.8 V

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC20,.12SQ,20

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQCC-N20

2

0.031 in (0.8 mm)

0.118 in (3 mm)

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADC08061BIN

Texas Instruments

Analog To Digital Converter, Flash Method

Industrial

Through-Hole

20

DIP

Rectangular

Plastic/Epoxy

1

No

5.6 V

1

CMOS

8

0.1953 %

5 V

Binary

5 V

In-Line

DIP20,.3

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-100 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Track

Dual

0.9 ns

R-PDIP-T20

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

1.027 in (26.075 mm)

ADC08D1020CIYB/NOPB

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

128

HLFQFP

Square

Plastic/Epoxy

1

Yes

870 mV

1000 MHz

2

CMOS

8

803 mA

0.3516 %

1.9 V

Offset Binary

1.9 V

Flatpack, Heat Sink/Slug, Low Profile, Fine Pitch

QFP128,.87SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-870 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Matte Tin

Sample

Quad

1 ns

S-PQFP-G128

3

0.063 in (1.6 mm)

0.787 in (20 mm)

No

Peak-to-peak input voltage range: 0.87 V

e3

30 s

260 °C (500 °F)

0.787 in (20 mm)

ADC08D1500CIYB/NOPB

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

128

HLFQFP

Square

Plastic/Epoxy

2

Yes

870 mV

1500 MHz

1

CMOS

8

0.3516 %

1.9 V

Offset Binary

Flatpack, Heat Sink/Slug, Low Profile, Fine Pitch

0.02 in (0.5 mm)

85 °C (185 °F)

-870 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Matte Tin

Sample

Quad

0.67 ns

S-PQFP-G128

3

0.063 in (1.6 mm)

0.787 in (20 mm)

Peak-to-peak input voltage range: 0.87 V

e3

30 s

260 °C (500 °F)

0.787 in (20 mm)

ADC3244IRGZT

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

48

HVQCCN

Square

Plastic/Epoxy

2

Yes

2 V

125 MHz

1

14

106 mA

1.8 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Quad

S-PQCC-N48

3

0.039 in (1 mm)

0.276 in (7 mm)

Peak-to-peak input voltage range: 2 V

e4

30 s

260 °C (500 °F)

0.276 in (7 mm)

ADS112U04IPWR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Automotive

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

5.05 V

2 kHz

1

16

510 μA

0.0015 %

2.5 V

Binary, 2's Complement Binary

-2.5 V

Small Outline, Thin Profile, Shrink Pitch

2.3 V

0.026 in (0.65 mm)

125 °C (257 °F)

-750 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G16

3

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS1282SJDJ

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Military

Through-Hole

28

DIP

Rectangular

Ceramic, Metal-Sealed Cofired

2

No

1.25 V

1

24

10 mA

0.009 %

2.5 V

2's Complement Binary

±2.5,3.3 V

-2.5 V

In-Line

DIP28,.3

Analog to Digital Converters

0.1 in (2.54 mm)

210 °C (410 °F)

-1.25 V

Serial

-55 °C (-67 °F)

Dual

R-CDIP-T28

0.175 in (4.45 mm)

0.3 in (7.62 mm)

No

1.4 in (35.56 mm)

ADS4229IRGC25

Texas Instruments

Analog To Digital Converter, Flash Method

Industrial

No Lead

64

HVQCCN

Square

Plastic/Epoxy

2

Yes

2 V

250 MHz

1

12

0.0977 %

1.8 V

Offset Binary, 2's Complement Binary

1.8 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC64,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

S-PQCC-N64

3

0.039 in (1 mm)

0.354 in (9 mm)

No

e4

30 s

260 °C (500 °F)

0.354 in (9 mm)

ADS4449IZCR

Texas Instruments

Analog To Digital Converter, Flash Method

Industrial

Ball

144

LFBGA

Square

Plastic/Epoxy

4

Yes

2 V

250 MHz

1

14

0.032 %

1.9 V

2's Complement Binary

1.8,1.9,3.3 V

Grid Array, Low Profile, Fine Pitch

BGA144,12X12,32

Analog to Digital Converters

0.031 in (0.8 mm)

85 °C (185 °F)

-2 V

Serial

-40 °C (-40 °F)

Tin Silver Copper

Sample

Bottom

S-PBGA-B144

3

0.059 in (1.5 mm)

0.394 in (10 mm)

No

Peak-to-peak input voltage range: 2 V

e1

30 s

260 °C (500 °F)

0.394 in (10 mm)

ADS5474HFG/EM

Texas Instruments

Analog To Digital Converter, Proprietary Method

Flat

84

HGQFF

Square

100k Rad(Si)

Ceramic, Metal-Sealed Cofired

1

Yes

2.2 V

400 MHz

1

BICMOS

14

380 mA

0.0183 %

3.3 V

Offset Binary

Flatpack, Heat Sink/Slug, Guard Ring

0.025 in (0.64 mm)

-2.2 V

Parallel, Word

Track

Quad

S-CQFP-F84

0.115 in (2.92 mm)

0.75 in (19.05 mm)

Peak-to-peak input voltage range: 2.2 V

0.75 in (19.05 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.