Texas Instruments Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

ADC3442IRTQ25

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

56

HVQCCN

Square

Plastic/Epoxy

4

Yes

2 V

50 MHz

1

14

1.8 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQCC-N56

3

0.039 in (1 mm)

0.315 in (8 mm)

e4

30 s

260 °C (500 °F)

0.315 in (8 mm)

TL503CNP3

Texas Instruments

Analog To Digital Converter

Commercial

Through-Hole

16

DIP

Rectangular

Plastic/Epoxy

1

No

1

Bipolar

5 V

Binary Coded Decimal

5 V

In-Line

DIP16,.3

Analog to Digital Converters

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-PDIP-T16

XDS7066IYBHR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Ball

16

BGA

Square

Plastic/Epoxy

8

Yes

11 V

250 kHz

1

16

1.6 mA

0.0061 %

3.3 V

Binary

Grid Array

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Bottom

S-PBGA-B16

TLC876IDW

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

2 V

20 MHz

1

CMOS

10

0.1172 %

5 V

Binary

3.3,5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

1 V

Parallel, Word

-40 °C (-40 °F)

Sample

Dual

R-PDSO-G28

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

0.705 in (17.9 mm)

ADC122S051QIMM

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

2

Yes

5.25 V

500 kHz

1

CMOS

12

0.0269 %

3 V

Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Track

Dual

1.625 µs

S-PDSO-G8

0.043 in (1.09 mm)

0.118 in (3 mm)

0.118 in (3 mm)

ADS825E

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

1

Yes

2 V

40 MHz

1

CMOS

10

0.1953 %

5 V

Offset Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-2 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

100 µs

R-PDSO-G28

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

Peak-to-peak input voltage range: 1, 2 V

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

ADS7806UB/1K

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

10 V

25 MHz

1

CMOS

12

0.011 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Serial, Parallel, 8 Bits

-40 °C (-40 °F)

Sample

Dual

20 µs

R-PDSO-G28

3

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

30 s

260 °C (500 °F)

0.705 in (17.9 mm)

TLC3578IDW

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

SOP

Rectangular

Plastic/Epoxy

8

Yes

10 V

200 kHz

1

CMOS

14

5 mA

0.0061 %

5 V

Offset Binary, 2's Complement Binary

3/5,5 V

Small Outline

SOP24,.4

Analog to Digital Converters

2.7 V

0.05 in (1.27 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

2.785 µs

R-PDSO-G24

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.606 in (15.4 mm)

TLV5580IDWRG4

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

3.5 V

80 MHz

1

CMOS

8

0.9375 %

3.3 V

Binary

3.3 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

800 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Sample

Dual

R-PDSO-G28

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

0.705 in (17.9 mm)

ADC121S101Q1IMF

Texas Instruments

Analog To Digital Converter, Successive Approximation

Offset Binary

ADC08D1520CIYB

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

128

HLFQFP

Square

Plastic/Epoxy

2

Yes

2.15 V

1500 MHz

1

CMOS

8

0.3516 %

1.9 V

Offset Binary

1.9 V

Flatpack, Heat Sink/Slug, Low Profile, Fine Pitch

QFP128,.87SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Tin Lead

Sample

Quad

0.6 ns

S-PQFP-G128

3

0.063 in (1.6 mm)

0.787 in (20 mm)

No

e0

260 °C (500 °F)

0.787 in (20 mm)

ADC3223IRGZR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

48

HVQCCN

Square

Plastic/Epoxy

2

Yes

2 V

125 MHz

1

12

1.8 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold Silver

Quad

S-PQCC-N48

3

0.039 in (1 mm)

0.276 in (7 mm)

Peak-to-peak input voltage range: 2 V

e4

30 s

260 °C (500 °F)

0.276 in (7 mm)

ADC09DJ800AAVT

Texas Instruments

Analog To Digital Converter, Proprietary Method

Ball

144

FBGA

Square

Plastic/Epoxy

2

Yes

800 mV

800 MHz

1

9

0.09765 %

1.1 V

2’s Complement, Offset Binary

Grid Array, Fine Pitch

BGA144,12X12,32

0.031 in (0.8 mm)

85 °C (185 °F)

-800 mV

Serial

-40 °C (-40 °F)

Tin Silver Copper

Bottom

S-PBGA-B144

3

0.076 in (1.94 mm)

0.394 in (10 mm)

Peak-to-peak input voltage range: 0.8 V

e1

30 s

260 °C (500 °F)

0.394 in (10 mm)

THS1230IDWR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

2 V

30 MHz

1

CMOS

12

0.0488 %

3.3 V

Binary

3.3 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2 V

Parallel, Word

-40 °C (-40 °F)

Sample

Dual

33 ns

R-PDSO-G28

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

0.705 in (17.9 mm)

ADS1245IDGSRG4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

2.5 V

15 Hz

1

24

0.0015 %

5 V

2's Complement Binary

3,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Dual

66.667 ms

S-PDSO-G10

0.043 in (1.1 mm)

0.118 in (3 mm)

No

0.118 in (3 mm)

TLV2543IDWG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

11

Yes

3.6 V

1

CMOS

12

0.0244 %

3.3 V

Binary, 2's Complement Binary

3.3 V

Small Outline

SOP20,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

10 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.505 in (12.825 mm)

THS1215IDWG4

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

2 V

15 MHz

1

CMOS

12

0.061 %

3.3 V

Binary

3.3 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

66 ns

R-PDSO-G28

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.705 in (17.9 mm)

ADC0838IN

Texas Instruments

Analog To Digital Converter

Industrial

Through-Hole

20

DIP

Rectangular

Plastic/Epoxy

1

No

5 V

1

Bipolar

8

Binary

In-Line

DIP20,.3

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Dual

R-PDIP-T20

No

ADS7816UB/2K5G4T/R

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

5 V

200 kHz

1

CMOS

12

0.0488 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Sample

Dual

3.75 µs

R-PDSO-G8

0.069 in (1.75 mm)

0.154 in (3.9 mm)

0.193 in (4.9 mm)

ADS803E/1K

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

1

Yes

5 V

5 MHz

1

12

27 mA

0.0488 %

5 V

Offset Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-5 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

100 µs

R-PDSO-G28

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

Peak-to-peak input voltage range: 2, 5 V

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

ADS7957QDBTRQ1

Texas Instruments

Analog To Digital Converter, Successive Approximation

Automotive

Gull Wing

38

TSSOP

Rectangular

Plastic/Epoxy

16

Yes

5.25 V

1 MHz

1

AEC-Q100

10

3 mA

0.0488 %

3.3 V

Binary

Small Outline, Thin Profile, Shrink Pitch

1.7 V

0.02 in (0.5 mm)

125 °C (257 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

800 ns

R-PDSO-G38

3

0.047 in (1.2 mm)

0.173 in (4.4 mm)

e4

30 s

260 °C (500 °F)

0.382 in (9.7 mm)

ADS804E/1K

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

1

Yes

5 V

10 MHz

1

12

40 mA

0.0488 %

5 V

Offset Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-5 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Track

Dual

100 µs

R-PDSO-G28

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

Peak-to-peak input voltage range: 2, 5 V

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

ADC088S102CIMTX/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.25 V

1 MHz

1

CMOS

8

2.2 mA

0.0781 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP16,.25

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

105 °C (221 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

16.25 µs

R-PDSO-G16

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e3

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS7821PB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Other

Through-Hole

28

DIP

Rectangular

Plastic/Epoxy

1

No

5 V

100 kHz

1

CMOS

16

0.0046 %

5 V

Binary

5 V

In-Line

DIP28,.3

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-25 °C (-13 °F)

Sample

Dual

8 µs

R-PDIP-T28

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

1.405 in (35.69 mm)

TL507IP3

Texas Instruments

Analog To Digital Converter

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

1

No

1

Bipolar

7

Binary

In-Line

DIP8,.3

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Dual

R-PDIP-T8

ADS1110A2IDBVRG4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.7 V

308 Hz

1

16

0.01 %

5 V

2's Complement Binary

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

0.037 in (0.95 mm)

85 °C (185 °F)

-200 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

THS1031CDWRG4

Texas Instruments

Analog To Digital Converter, Proprietary Method

Commercial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

30 MHz

1

CMOS

10

0.1953 %

3.3 V

Binary, 2's Complement Binary

3.3 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

0 mV

Parallel, Word

0 °C (32 °F)

Sample

Dual

R-PDSO-G28

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

0.705 in (17.905 mm)

ADS5424MPJYEP

Texas Instruments

Analog To Digital Converter, Proprietary Method

Military

Gull Wing

52

HLQFP

Square

Plastic/Epoxy

1

Yes

2.2 V

105 MHz

1

Bipolar

14

5 V

2's Complement Binary

3.3,5 V

Flatpack, Heat Sink/Slug, Low Profile

QFP52,.47SQ

Analog to Digital Converters

0.026 in (0.65 mm)

125 °C (257 °F)

0 mV

Parallel, Word

-55 °C (-67 °F)

Track

Quad

S-PQFP-G52

0.063 in (1.6 mm)

0.394 in (10 mm)

No

0.394 in (10 mm)

ADC12H038CIWMX

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

8

Yes

5 MHz

1

12

0.0244 %

5 V

2's Complement Binary

Small Outline

0.05 in (1.27 mm)

85 °C (185 °F)

Serial

-40 °C (-40 °F)

Sample

Dual

5.5 µs

R-PDSO-G28

0.104 in (2.65 mm)

0.295 in (7.5 mm)

0.705 in (17.9 mm)

TLV0834CDR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

4

Yes

3.6 V

31 kHz

1

CMOS

8

750 μA

0.0977 %

3.3 V

Binary

3.3 V

Small Outline

SOP14,.25

Analog to Digital Converters

2.7 V

0.05 in (1.27 mm)

70 °C (158 °F)

-50 mV

Serial

0 °C (32 °F)

Nickel Palladium Gold

Dual

32 µs

R-PDSO-G14

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.341 in (8.65 mm)

TLC1205AIJ

Texas Instruments

Analog To Digital Converter

Industrial

Through-Hole

24

DIP

Rectangular

Ceramic

1

No

1

CMOS

13

Offset Binary

In-Line

DIP24,.6

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Dual

R-XDIP-T24

No

TLV1571CPWLE

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

1.25 MHz

1

10

0.0977 %

5 V

Binary, 2's Complement Binary

Small Outline, Thin Profile, Shrink Pitch

0.026 in (0.65 mm)

70 °C (158 °F)

0 mV

Parallel, Word

0 °C (32 °F)

Dual

R-PDSO-G24

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

0.307 in (7.8 mm)

ADS7831U

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

600 kHz

1

CMOS

12

0.0244 %

5 V

2's Complement Binary

±5 V

-5 V

Small Outline

SOP28,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-2.5 V

Parallel, Word

-40 °C (-40 °F)

Sample

Dual

R-PDSO-G28

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

0.705 in (17.9 mm)

TLC2551IDGKRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

360 kHz

1

CMOS

12

0.0244 %

5 V

Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Sample

Dual

S-PDSO-G8

0.043 in (1.1 mm)

0.118 in (3 mm)

No

0.118 in (3 mm)

TLC1542MJB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Military

Through-Hole

20

DIP

Rectangular

Ceramic, Glass-Sealed

11

No

5.5 V

38 kHz

1

CMOS

MIL-STD-883

10

0.0977 %

5 V

Binary

5 V

In-Line

DIP20,.3

Analog to Digital Converters

0.1 in (2.54 mm)

125 °C (257 °F)

0 mV

Serial

-55 °C (-67 °F)

Sample

Dual

21 µs

R-GDIP-T20

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

0.953 in (24.195 mm)

ADC122S101CIMMX/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

5.25 V

1 MHz

1

CMOS

12

0.0391 %

3 V

Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

1.625 µs

R-PDSO-G8

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS1100A7IDBVRG4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

2.5 V

184 Hz

1

16

0.0125 %

5 V

2's Complement Binary

5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

0.037 in (0.95 mm)

85 °C (185 °F)

-2.5 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

5.43478 ms

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

PCM1851APJT

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

32

TQFP

Square

Plastic/Epoxy

12

Yes

2 V

96 kHz

1

CMOS

24

35 mA

5 V

2's Complement Binary

3.3,5 V

Flatpack, Thin Profile

TQFP32,.35SQ,32

Analog to Digital Converters

0.031 in (0.8 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Quad

S-PQFP-G32

1

0.047 in (1.2 mm)

0.276 in (7 mm)

No

e4

260 °C (500 °F)

0.276 in (7 mm)

ADS8326IDGKRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

8

TSSOP

Square

Plastic/Epoxy

1

Yes

5 V

250 kHz

1

CMOS

16

3 mA

0.0046 %

5 V

Binary

2.7/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP8,.19

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

666.7 µs

S-PDSO-G8

2

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e4

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADS4225IRGCT

Texas Instruments

Analog To Digital Converter, Flash Method

Industrial

No Lead

64

HVQCCN

Square

Plastic/Epoxy

2

Yes

2 V

125 MHz

1

12

150 mA

0.085 %

1.8 V

Offset Binary, 2's Complement Binary

1.8 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC64,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Nickel/Palladium/Gold

Sample

Quad

S-PQCC-N64

3

0.039 in (1 mm)

0.354 in (9 mm)

No

Peak-to-peak input voltage range: 2 V

e4

260 °C (500 °F)

0.354 in (9 mm)

TLC1543IFN

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

J Bend

20

QCCJ

Square

Plastic/Epoxy

11

Yes

5.5 V

38 kHz

1

CMOS

10

2.5 mA

0.0977 %

5 V

Binary

5 V

Chip Carrier

LDCC20,.4SQ

Analog to Digital Converters

4.5 V

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Quad

21 µs

S-PQCC-J20

1

0.18 in (4.57 mm)

0.353 in (8.965 mm)

No

e3

30 s

260 °C (500 °F)

0.353 in (8.965 mm)

ADC0820BCDWR

Texas Instruments

Analog To Digital Converter, Flash Method

Commercial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

1

Yes

10.2 V

625 kHz

1

CMOS

8

13 mA

0.195 %

5 V

Binary

Small Outline

0.05 in (1.27 mm)

70 °C (158 °F)

-200 mV

Parallel, 8 Bits

0 °C (32 °F)

Track

Dual

2.5 µs

R-PDSO-G20

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

0.504 in (12.8 mm)

PCM1803DBG4

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

2

Yes

3 V

96 kHz

1

CMOS

24

10 mA

5 V

2's Complement Binary

3.3,5 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel/Palladium/Gold

Dual

R-PDSO-G20

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

260 °C (500 °F)

0.283 in (7.2 mm)

ADS6145IRHB25

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

32

HVQCCN

Square

Plastic/Epoxy

1

Yes

2 V

125 MHz

1

CMOS

14

0.0275 %

3.3 V

Binary, Offset Binary, 2's Complement Binary

3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC32,.2SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

S-PQCC-N32

3

0.039 in (1 mm)

0.197 in (5 mm)

No

e4

30 s

260 °C (500 °F)

0.197 in (5 mm)

ADS62P42IRGC25

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

64

HVQCCN

Square

Plastic/Epoxy

2

Yes

2 V

65 MHz

1

CMOS

14

0.0305 %

3.3 V

Binary, Offset Binary, 2's Complement Binary

1.8/3.3,3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC64,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

15 ns

S-PQCC-N64

3

0.039 in (1 mm)

0.354 in (9 mm)

No

e4

30 s

260 °C (500 °F)

0.354 in (9 mm)

ADC0838CCWMX

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

8

Yes

5.05 V

1

Bipolar

8

0.3906 %

5 V

Binary

Small Outline

SOP20,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-50 mV

Serial

-40 °C (-40 °F)

Tin Lead

Dual

32 µs

R-PDSO-G20

2A

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e0

20 s

220 °C (428 °F)

0.504 in (12.8 mm)

ADC10154CIWMX/NOPB

Texas Instruments

Industrial

Gull Wing

24

SOP

Rectangular

Plastic/Epoxy

4

Yes

5 V

CMOS

11

0.1 %

Binary, 2's Complement Binary

5,GND/-5 V

Small Outline

SOP24,.4

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

-40 °C (-40 °F)

Matte Tin

Dual

R-PDSO-G24

3

No

e3

30 s

260 °C (500 °F)

THS1215IPW

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

2 V

15 MHz

1

CMOS

12

0.061 %

3.3 V

Binary

3.3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP28,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-2 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

66 ns

R-PDSO-G28

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.382 in (9.7 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.