Texas Instruments Analog-to-Digital Converters 2,400+

Reset All
Part RoHS Manufacturer Converter Type Temperature Grade Terminal Form No. of Terminals Package Code Package Shape Total Dose (V) Package Body Material No. of Analog In Channels Surface Mount Maximum Supply Voltage Maximum Analog Input Voltage Sample Rate No. of Functions Technology Screening Level Nominal Bandwidth No. of Bits Maximum Supply Current Maximum Linearity Error (EL) Nominal Supply Voltage Output Bit Code Power Supplies (V) Nominal Negative Supply Voltage Package Style (Meter) Package Equivalence Code Sub-Category Minimum Supply Voltage Terminal Pitch Maximum Operating Temperature Minimum Analog Input Voltage Output Format Minimum Operating Temperature Terminal Finish Sample and Hold/Track and Hold Terminal Position Maximum Conversion Time JESD-30 Code Moisture Sensitivity Level (MSL) Maximum Seated Height Width Qualification Additional Features JESD-609 Code Maximum Time At Peak Reflow Temperature (s) Peak Reflow Temperature (C) Length Input Bit Code

TLC2558IDWR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

8

Yes

5.5 V

400 kHz

1

CMOS

12

0.0244 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline

SOP20,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Sample

Dual

2.5 µs

R-PDSO-G20

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

0.504 in (12.8 mm)

ADS5525IRGZT

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

48

HVQCCN

Square

Plastic/Epoxy

1

Yes

2 V

170 MHz

1

CMOS

12

0.0391 %

3.3 V

Binary, Offset Binary, 2's Complement Binary

3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC48,.27SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

S-PQCC-N48

3

0.039 in (1 mm)

0.276 in (7 mm)

No

Peak-to-peak input voltage range: 2 V

e4

30 s

260 °C (500 °F)

0.276 in (7 mm)

ADS774KPG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Through-Hole

28

DIP

Rectangular

Plastic/Epoxy

1

No

10 V

117 kHz

1

CMOS

12

0.0122 %

5 V

Binary, Offset Binary

5,5/-15 V

In-Line

DIP28,.6

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-10 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

8.5 µs

R-PDIP-T28

0.25 in (6.35 mm)

0.6 in (15.24 mm)

No

e4

1.472 in (37.4 mm)

ADS5546IRGZTG4

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

48

HVQCCN

Square

Plastic/Epoxy

1

Yes

2 V

190 MHz

1

CMOS

14

0.0305 %

3.3 V

Binary, Offset Binary, 2's Complement Binary

3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC48,.27SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

S-PQCC-N48

3

0.039 in (1 mm)

0.276 in (7 mm)

No

e4

30 s

260 °C (500 °F)

0.276 in (7 mm)

ADS8370IRHPR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

28

HVQCCN

Square

Plastic/Epoxy

1

Yes

4.2 V

600 kHz

1

CMOS

16

0.0031 %

5 V

Binary, 2's Complement Binary

3/5,5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC28(UNSPEC)

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

1.16 µs

S-PQCC-N28

2

0.039 in (1 mm)

0.236 in (6 mm)

No

e4

30 s

260 °C (500 °F)

0.236 in (6 mm)

TLV0831CD

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

8

SOP

Rectangular

Plastic/Epoxy

1

Yes

3.6 V

31 kHz

1

CMOS

8

2.5 mA

0.0977 %

3.3 V

Binary

3.3 V

Small Outline

SOP8,.25

Analog to Digital Converters

2.7 V

0.05 in (1.27 mm)

70 °C (158 °F)

-50 mV

Serial

0 °C (32 °F)

Nickel Palladium Gold

Dual

32 µs

R-PDSO-G8

1

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ADS7871IDBG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

8

Yes

5.5 V

48 kHz

1

CMOS

14

2 mA

0.0122 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

2.7 V

0.026 in (0.65 mm)

85 °C (185 °F)

-200 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G28

2

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

30 s

260 °C (500 °F)

0.402 in (10.2 mm)

ADC0834ACN3

Texas Instruments

Commercial

Through-Hole

14

DIP

Rectangular

Plastic/Epoxy

4

No

0 mV

CMOS

8

5 V

Binary

5 V

In-Line

DIP14,.3

Analog to Digital Converters

0.1 in (2.54 mm)

70 °C (158 °F)

0 °C (32 °F)

Dual

R-PDIP-T14

ADC141S626CIMM/NOPB

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

10

TSSOP

Square

Plastic/Epoxy

1

Yes

5.5 V

250 kHz

1

14

970 μA

0.0058 %

3 V

2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP10,.19,20

Analog to Digital Converters

2.7 V

0.02 in (0.5 mm)

85 °C (185 °F)

-1 V

Serial

-40 °C (-40 °F)

Matte Tin

Sample

Dual

20 µs

S-PDSO-G10

1

0.043 in (1.1 mm)

0.118 in (3 mm)

No

e3

30 s

260 °C (500 °F)

0.118 in (3 mm)

ADC12L080CIVY/NOPB

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

32

LQFP

Square

Plastic/Epoxy

1

Yes

2 V

80 MHz

1

CMOS

12

168 mA

0.0977 %

3.3 V

Offset Binary, 2's Complement Binary

2.5,3.3 V

Flatpack, Low Profile

QFP32,.35SQ,32

Analog to Digital Converters

0.031 in (0.8 mm)

85 °C (185 °F)

-2 V

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

S-PQFP-G32

3

0.057 in (1.45 mm)

0.276 in (7 mm)

No

Peak-to-peak input voltage range: 2 V

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

TLC0820ACFN3

Texas Instruments

Analog To Digital Converter

Commercial

J Bend

20

QCCJ

Square

Plastic/Epoxy

1

Yes

5 V

1

CMOS

8

5 V

Offset Binary

5 V

Chip Carrier

LDCC20,.4SQ

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

0 °C (32 °F)

Quad

S-PQCC-J20

ADC101S101CISDX/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

6

HVSON

Rectangular

Plastic/Epoxy

1

Yes

5.25 V

1 MHz

1

CMOS

10

0.0684 %

3 V

Binary

3/5 V

Small Outline, Heat Sink/Slug, Very Thin Profile

SOLCC6,.1,25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Matte Tin

Track

Dual

R-PDSO-N6

1

0.031 in (0.8 mm)

0.087 in (2.2 mm)

No

e3

30 s

260 °C (500 °F)

0.098 in (2.5 mm)

TLC1541CDWRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

11

Yes

5.5 V

32.258 kHz

1

CMOS

10

0.0977 %

5 V

Binary

5 V

Small Outline

SOP20,.4

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Nickel Palladium Gold

Sample

Dual

21 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

TLV0838INE4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Through-Hole

20

DIP

Rectangular

Plastic/Epoxy

8

No

3.65 V

37.9 kHz

1

CMOS

8

0.0977 %

3.3 V

Binary

3.3 V

In-Line

DIP20,.3

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-50 mV

Serial

-40 °C (-40 °F)

Dual

32 µs

R-PDIP-T20

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

1 in (25.4 mm)

TLC5510IPWRG4

Texas Instruments

Analog To Digital Converter, Flash Method

Commercial Extended

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

2 V

20 MHz

1

CMOS

8

0.3906 %

5 V

Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

75 °C (167 °F)

0 mV

Parallel, 8 Bits

-20 °C (-4 °F)

Nickel Palladium Gold

Sample

Dual

R-PDSO-G24

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

ADS8405IBPFBTG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

48

TFQFP

Square

Plastic/Epoxy

1

Yes

4.2 V

1.25 MHz

1

CMOS

16

34 mA

0.0031 %

5 V

Binary

3/5 V

Flatpack, Thin Profile, Fine Pitch

TQFP48,.35SQ

Analog to Digital Converters

2.7 V

0.02 in (0.5 mm)

85 °C (185 °F)

0 mV

Parallel, 8 Bits, Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

650 ns

S-PQFP-G48

2

0.047 in (1.2 mm)

0.276 in (7 mm)

No

e4

30 s

260 °C (500 °F)

0.276 in (7 mm)

ADS1286PCG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

1

No

5.3 V

20 kHz

1

CMOS

12

0.0244 %

5 V

Binary

5 V

In-Line

DIP8,.3

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

60 µs

R-PDIP-T8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

e4

0.386 in (9.81 mm)

ADC11L066CIVY/NOPB

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

32

LQFP

Square

Plastic/Epoxy

1

Yes

1.5 V

66 MHz

1

CMOS

11

0.0879 %

3.3 V

Binary

2.5,3.3 V

Flatpack, Low Profile

QFP32,.35SQ,32

Analog to Digital Converters

0.031 in (0.8 mm)

85 °C (185 °F)

500 mV

Parallel, Word

-40 °C (-40 °F)

Matte Tin

Sample

Quad

S-PQFP-G32

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e3

30 s

260 °C (500 °F)

0.276 in (7 mm)

ADS1110A5IDBVR

Texas Instruments

Analog To Digital Converter, Delta-Sigma

Industrial

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

128 Hz

1

16

350 μA

0.01 %

5 V

2's Complement Binary

3/5 V

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

Analog to Digital Converters

2.7 V

0.037 in (0.95 mm)

85 °C (185 °F)

-200 mV

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G6

1

0.057 in (1.45 mm)

0.063 in (1.6 mm)

No

e4

30 s

260 °C (500 °F)

0.114 in (2.9 mm)

ADC0832BIP

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Through-Hole

8

DIP

Rectangular

Plastic/Epoxy

2

No

6.8 V

31.25 kHz

1

Bipolar

8

5.2 mA

0.195 %

5 V

Binary

5 V

In-Line

DIP8,.3

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-300 mV

Serial

-40 °C (-40 °F)

Dual

800 µs

R-PDIP-T8

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

0.386 in (9.81 mm)

TLC1514IDR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SOP

Rectangular

Plastic/Epoxy

4

Yes

5.5 V

400 kHz

1

CMOS

10

0.0488 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline

SOP16,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Sample

Dual

R-PDSO-G16

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.39 in (9.9 mm)

TLV1571IPWG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

5.5 V

1.25 MHz

1

CMOS

10

0.0977 %

3 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Dual

R-PDSO-G24

2

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e4

30 s

260 °C (500 °F)

0.307 in (7.8 mm)

ADC10DL065CIVS

Texas Instruments

Analog To Digital Converter Subsystem

Industrial

Gull Wing

48

TFQFP

Square

Plastic/Epoxy

2

Yes

3.6 V

65 MHz

2

CMOS

10

0.0977 %

3.3 V

Binary, Offset Binary, 2's Complement Binary

3.3 V

Flatpack, Thin Profile, Fine Pitch

TQFP64,.47SQ

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

3 V

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Sample

Quad

107 ns

S-PQFP-G48

3

0.047 in (1.2 mm)

0.394 in (10 mm)

No

e0

260 °C (500 °F)

0.394 in (10 mm)

ADC09DJ1300AAVQ1

Texas Instruments

Analog To Digital Converter, Proprietary Method

Automotive

Ball

144

FBGA

Square

Plastic/Epoxy

2

Yes

800 mV

1300 MHz

1

AEC-Q100

9

0.06445 %

1.1 V

Offset Binary, 2's Complement Binary

Grid Array, Fine Pitch

BGA144,12X12,32

0.031 in (0.8 mm)

125 °C (257 °F)

-800 mV

Serial

-40 °C (-40 °F)

Tin Silver Copper

Bottom

S-PBGA-B144

3

0.076 in (1.94 mm)

0.394 in (10 mm)

Peak-to-peak input voltage range: 0.8 V

e1

30 s

260 °C (500 °F)

0.394 in (10 mm)

ADC12SJ800AAVTQ1

Texas Instruments

Analog To Digital Converter, Proprietary Method

Ball

144

FBGA

Square

Plastic/Epoxy

1

Yes

800 mV

800 MHz

1

AEC-Q100

12

0.046386 %

1.1 V

2’s Complement, Offset Binary

Grid Array, Fine Pitch

BGA144,12X12,32

0.031 in (0.8 mm)

125 °C (257 °F)

-800 mV

Serial

-40 °C (-40 °F)

Tin Silver Copper

Bottom

S-PBGA-B144

3

0.076 in (1.94 mm)

0.394 in (10 mm)

Peak-to-peak input voltage range: 0.8 V

e1

260 °C (500 °F)

0.394 in (10 mm)

ADC0817CCN/NOPB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Through-Hole

40

DIP

Rectangular

Plastic/Epoxy

16

No

6.1 V

1

CMOS

8

0.49 %

5 V

Binary

5 V

In-Line

DIP40,.6

Analog to Digital Converters

0.1 in (2.54 mm)

85 °C (185 °F)

-100 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Matte Tin

Dual

116 µs

R-PDIP-T40

1

0.21 in (5.33 mm)

0.6 in (15.24 mm)

No

e3

2.056 in (52.235 mm)

TLV1570CDW

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

8

Yes

5.5 V

1.25 MHz

1

CMOS

10

8.5 mA

0.0977 %

3 V

Binary

3/5 V

Small Outline

SOP20,.4

Analog to Digital Converters

2.7 V

0.05 in (1.27 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Nickel Palladium Gold

Sample

Dual

1 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

ADS5282IRGCTG4

Texas Instruments

Analog To Digital Converter Subsystem

Industrial

No Lead

64

HVQCCN

Square

Plastic/Epoxy

8

Yes

2 V

65 MHz

1

CMOS

12

0.0415 %

3.3 V

Offset Binary, 2's Complement Binary

1.8,3.3 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC64,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

S-PQCC-N64

3

0.039 in (1 mm)

0.354 in (9 mm)

No

e4

30 s

260 °C (500 °F)

0.354 in (9 mm)

TLC2558CPWG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

8

Yes

5.5 V

400 kHz

1

CMOS

12

0.0244 %

5 V

Binary, 2's Complement Binary

5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Sample

Dual

R-PDSO-G20

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

0.256 in (6.5 mm)

ADC12040CIVY

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

32

LQFP

Square

Plastic/Epoxy

1

Yes

40 MHz

1

CMOS

12

0.0439 %

5 V

Offset Binary

3,5 V

Flatpack, Low Profile

QFP32,.35SQ,32

Analog to Digital Converters

0.031 in (0.8 mm)

85 °C (185 °F)

Parallel, Word

-40 °C (-40 °F)

Tin Lead

Sample

Quad

25 ns

S-PQFP-G32

3

0.063 in (1.6 mm)

0.276 in (7 mm)

No

e0

260 °C (500 °F)

0.276 in (7 mm)

ADS8343E

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

16

SSOP

Rectangular

Plastic/Epoxy

4

Yes

5.25 V

100 kHz

1

CMOS

16

0.0183 %

2.7 V

2's Complement Binary

2.7/5 V

Small Outline, Shrink Pitch

SSOP16,.25

Analog to Digital Converters

2.7 V

0.025 in (0.635 mm)

85 °C (185 °F)

-1.25 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Dual

6.67 µs

R-PDSO-G16

2

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

e4

30 s

260 °C (500 °F)

0.193 in (4.9 mm)

ADC3424IRTQR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

56

HVQCCN

Square

Plastic/Epoxy

4

Yes

2 V

125 MHz

1

12

145 mA

1.8 V

Offset Binary, 2's Complement Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

-2 V

Serial

-40 °C (-40 °F)

Nickel Palladium Gold

Quad

S-PQCC-N56

3

0.039 in (1 mm)

0.315 in (8 mm)

Peak-to-peak input voltage range: 2 V

e4

30 s

260 °C (500 °F)

0.315 in (8 mm)

ADCV0831M6

Texas Instruments

Analog To Digital Converter, Successive Approximation

Gull Wing

6

LSSOP

Rectangular

Plastic/Epoxy

1

Yes

3.05 V

700 kHz

1

8

0.5859 %

3 V

Binary

Small Outline, Low Profile, Shrink Pitch

TSOP6,.11,37

0.037 in (0.95 mm)

-50 mV

Serial

Sample

Dual

15.7143 µs

R-PDSO-G6

0.048 in (1.22 mm)

0.063 in (1.6 mm)

0.115 in (2.92 mm)

TLC1543CDWG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

11

Yes

5.5 V

38 kHz

1

CMOS

10

2.5 mA

0.0977 %

5 V

Binary

5 V

Small Outline

SOP20,.4

Analog to Digital Converters

4.5 V

0.05 in (1.27 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Nickel Palladium Gold

Sample

Dual

21 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

TLC1549MFKR

Texas Instruments

Analog To Digital Converter, Successive Approximation

Military

No Lead

20

QCCN

Square

Ceramic, Metal-Sealed Cofired

1

Yes

5.5 V

1

CMOS

10

0.0977 %

5 V

Binary

Chip Carrier

0.05 in (1.27 mm)

125 °C (257 °F)

0 mV

Serial

-55 °C (-67 °F)

Sample

Quad

21 µs

S-CQCC-N20

0.08 in (2.03 mm)

0.35 in (8.89 mm)

No

0.35 in (8.89 mm)

TLC1542CDWRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SOP

Rectangular

Plastic/Epoxy

11

Yes

5.5 V

1

CMOS

10

0.0488 %

5 V

Binary

5 V

Small Outline

SOP20,.4

Analog to Digital Converters

0.05 in (1.27 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Nickel Palladium Gold

Sample

Dual

21 µs

R-PDSO-G20

1

0.104 in (2.65 mm)

0.295 in (7.5 mm)

No

e4

30 s

260 °C (500 °F)

0.504 in (12.8 mm)

ADS8284IBRGCT

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

No Lead

64

HVQCCN

Square

Plastic/Epoxy

4

Yes

4.096 V

1 MHz

1

18

50 mA

0.001 %

5 V

Binary

±5,3/5 V

-5 V

Chip Carrier, Heat Sink/Slug, Very Thin Profile

LCC64,.35SQ,20

Analog to Digital Converters

0.02 in (0.5 mm)

85 °C (185 °F)

-4.096 V

Parallel, Word

-40 °C (-40 °F)

Nickel Palladium Gold

Sample

Quad

650 ns

S-PQCC-N64

3

0.039 in (1 mm)

0.354 in (9 mm)

No

e4

30 s

260 °C (500 °F)

0.354 in (9 mm)

TLC0834BID

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

14

SOP

Rectangular

Plastic/Epoxy

4

Yes

5 V

3.75 kHz

1

CMOS

8

0.2 %

5 V

Binary

5 V

Small Outline

SOP14,.25

Analog to Digital Converters

0.05 in (1.27 mm)

85 °C (185 °F)

0 mV

Serial

-40 °C (-40 °F)

Dual

32 µs

R-PDSO-G14

0.069 in (1.75 mm)

0.154 in (3.9 mm)

No

0.341 in (8.65 mm)

THS1206CDARG4

Texas Instruments

Analog To Digital Converter, Proprietary Method

Commercial

Gull Wing

32

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

3.7 V

6 MHz

1

CMOS

12

40 mA

0.0366 %

3.3 V

Binary, 2's Complement Binary

3.3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP32,.3

Analog to Digital Converters

0.026 in (0.65 mm)

70 °C (158 °F)

1.4 V

Parallel, Word

0 °C (32 °F)

Nickel Palladium Gold

Sample

Dual

175 ns

R-PDSO-G32

2

0.047 in (1.2 mm)

0.24 in (6.1 mm)

No

e4

30 s

260 °C (500 °F)

0.433 in (11 mm)

TLV2543CDB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Gull Wing

20

SSOP

Rectangular

Plastic/Epoxy

11

Yes

3.6 V

66 kHz

1

CMOS

12

2.5 mA

0.0244 %

3.3 V

Binary, 2's Complement Binary

3.3 V

Small Outline, Shrink Pitch

SSOP20,.3

Analog to Digital Converters

3 V

0.026 in (0.65 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Nickel/Palladium/Gold

Sample

Dual

10 µs

R-PDSO-G20

1

0.079 in (2 mm)

0.209 in (5.3 mm)

No

e4

260 °C (500 °F)

0.283 in (7.2 mm)

TLC1542CFN

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

J Bend

20

QCCJ

Square

Plastic/Epoxy

11

Yes

5.5 V

38 kHz

1

CMOS

10

2.5 mA

0.0488 %

5 V

Binary

5 V

Chip Carrier

LDCC20,.4SQ

Analog to Digital Converters

4.5 V

0.05 in (1.27 mm)

70 °C (158 °F)

0 mV

Serial

0 °C (32 °F)

Matte Tin

Sample

Quad

21 µs

S-PQCC-J20

1

0.18 in (4.57 mm)

0.353 in (8.965 mm)

No

e3

30 s

260 °C (500 °F)

0.353 in (8.965 mm)

ADC08L060CIMTX

Texas Instruments

Analog To Digital Converter, Resistance Ladder

Industrial

Gull Wing

24

TSSOP

Rectangular

Plastic/Epoxy

1

Yes

3.6 V

60 MHz

1

CMOS

8

0.7422 %

3 V

Binary

3 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP24,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

0 mV

Parallel, 8 Bits

-40 °C (-40 °F)

Tin Lead

Sample

Dual

16 ns

R-PDSO-G24

1

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

e0

260 °C (500 °F)

0.307 in (7.8 mm)

ADS54J69IRMPR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

No Lead

72

HVQCCN

Square

2

Yes

1.9 V

500 MHz

1

16

Binary

Chip Carrier, Heat Sink/Slug, Very Thin Profile

0.02 in (0.5 mm)

85 °C (185 °F)

-1.9 V

Parallel, Word

-40 °C (-40 °F)

Sample

Quad

S-XQCC-N72

0.035 in (0.9 mm)

0.394 in (10 mm)

0.394 in (10 mm)

TLV1543MJB

Texas Instruments

Analog To Digital Converter, Successive Approximation

Military

Through-Hole

20

DIP

Rectangular

Ceramic, Glass-Sealed

11

No

3.6 V

38 kHz

1

CMOS

MIL-STD-883

10

0.0977 %

3.3 V

Binary

3.3 V

In-Line

DIP20,.3

Analog to Digital Converters

0.1 in (2.54 mm)

125 °C (257 °F)

0 mV

Serial

-55 °C (-67 °F)

Sample

Dual

21 µs

R-GDIP-T20

0.2 in (5.08 mm)

0.3 in (7.62 mm)

No

0.953 in (24.195 mm)

TLC3574IPWRG4

Texas Instruments

Analog To Digital Converter, Successive Approximation

Industrial

Gull Wing

20

TSSOP

Rectangular

Plastic/Epoxy

4

Yes

10 V

200 kHz

1

CMOS

14

0.0061 %

5 V

Offset Binary, 2's Complement Binary

3/5,5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP20,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

-10 V

Serial

-40 °C (-40 °F)

Sample

Dual

2.785 µs

R-PDSO-G20

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

0.256 in (6.5 mm)

TLV1562IPWLE

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

TSSOP

Rectangular

Plastic/Epoxy

2

Yes

3 V

7 MHz

1

CMOS

10

0.1465 %

3 V

Binary, 2's Complement Binary

3/5 V

Small Outline, Thin Profile, Shrink Pitch

TSSOP28,.25

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

800 mV

Parallel, Word

-40 °C (-40 °F)

Sample

Dual

R-PDSO-G28

0.047 in (1.2 mm)

0.173 in (4.4 mm)

No

0.382 in (9.7 mm)

TLC876IDBR

Texas Instruments

Analog To Digital Converter, Proprietary Method

Industrial

Gull Wing

28

SSOP

Rectangular

Plastic/Epoxy

1

Yes

2 V

20 MHz

1

CMOS

10

0.1172 %

5 V

Binary

3.3,5 V

Small Outline, Shrink Pitch

SSOP28,.3

Analog to Digital Converters

0.026 in (0.65 mm)

85 °C (185 °F)

1 V

Parallel, Word

-40 °C (-40 °F)

Sample

Dual

R-PDSO-G28

0.079 in (2 mm)

0.209 in (5.3 mm)

No

0.402 in (10.2 mm)

PCM78P

Texas Instruments

Analog To Digital Converter, Successive Approximation

Commercial

Through-Hole

28

DIP

Rectangular

Plastic/Epoxy

1

No

3 V

1

BIMOS

16

12 V

Binary, 2's Complement Binary

5,±12 V

-12 V

In-Line

DIP28,.6

Analog to Digital Converters

0.1 in (2.54 mm)

70 °C (158 °F)

-3 V

Serial

0 °C (32 °F)

Dual

5 µs

R-PDIP-T28

0.25 in (6.35 mm)

0.6 in (15.24 mm)

No

1.472 in (37.4 mm)

Analog-to-Digital Converters

Analog-to-digital converters (ADCs) are electronic devices that convert continuous analog signals into digital signals, which can be processed by digital circuits, microcontrollers, or computers. ADCs are essential components in many electronic systems, as they allow the measurement and processing of physical signals, such as temperature, pressure, light, and sound.

ADCs work by sampling the analog signal at regular intervals and quantizing the sampled signal into a series of digital values. The sampling rate and the resolution of the ADC determine the accuracy and the bandwidth of the digital signal. ADCs may also include features such as amplification, filtering, or signal conditioning, to improve the accuracy and stability of the digital signal.

ADCs can be classified based on their architecture and their application. The most common types of ADCs are successive approximation ADCs, delta-sigma ADCs, and pipeline ADCs. Each type has its advantages and limitations, depending on the application and the required performance.

ADCs are used in a wide range of applications, from consumer electronics, such as smartphones and digital cameras, to industrial automation, medical devices, and scientific instruments. They play a crucial role in the conversion of physical signals into digital signals, allowing the processing, storage, and transmission of data in electronic systems.

Overall, ADCs are essential components in many electronic systems, providing the necessary signal conversion for a wide range of applications. Their accuracy, speed, and resolution determine the performance and the functionality of many electronic devices and systems.