LINE RECEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Maximum Receive Delay
EL5172IYZ	Renesas Electronics	LINE RECEIVER																																MATTE TIN			2									e3	30	260
EL5175ISZ	Renesas Electronics	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR			GENERAL PURPOSE	11 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		2.375 V	1.27 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G8	3	1.7272 mm	3.9116 mm	Not Qualified			1			e3	30	260	4.9022 mm	0 ns
EL9110IU	Renesas Electronics	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES		1				GENERAL PURPOSE	34 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		Line Driver or Receivers			.635 mm	85 Cel			-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	1.7272 mm	3.9116 mm	Not Qualified			1		NO	e0			4.9022 mm	0 ns
EL9110IU-T7	Renesas Electronics	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES		1				GENERAL PURPOSE	34 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		Line Driver or Receivers			.635 mm	85 Cel			-40 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	1.7272 mm	3.9116 mm	Not Qualified			1		NO	e0			4.9022 mm	0 ns
EL9110IUZ	Renesas Electronics	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES		1				GENERAL PURPOSE	34 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		Line Driver or Receivers			.635 mm	85 Cel			-40 Cel	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	2	1.7272 mm	3.9116 mm	Not Qualified			1		NO	e3	30	260	4.9022 mm	0 ns
HS1-26CLV32EH-Q	Renesas Electronics	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	300k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	NO	3.6 V	4	CMOS			EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				IN-LINE					3 V	2.54 mm	125 Cel			-55 Cel	GOLD	DUAL	R-CDIP-T16		5.08 mm	7.62 mm				4		NO	e4			21.34 mm
ISL3281EFHZ-T7A	Renesas Electronics	LINE RECEIVER																																Matte Tin (Sn) - annealed												e3
MC10115P	Onsemi	LINE RECEIVER	OTHER	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO		4	ECL			GENERAL PURPOSE	29 mA	DIFFERENTIAL			-5.2	-5.2 V	IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	85 Cel			-30 Cel	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T16		4.44 mm	7.62 mm	Not Qualified			4		NO	e0	30	235	19.175 mm	2.9 ns
MC75108P	Motorola	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel	TIN LEAD	DUAL	R-PDIP-T14		4.69 mm	7.62 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT		e0			18.86 mm	25 ns
UA9637ARMQB	Fairchild Semiconductor	LINE RECEIVER	MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR		UNSPECIFIED	NO	5.5 V	2	BIPOLAR	38535Q/M;38534H;883B		EIA-422; EIA-423	50 mA	DIFFERENTIAL	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel			-55 Cel	TIN LEAD	DUAL	R-XDIP-T8				Not Qualified	20 Amp		1		NO	e0				25 ns
5962-7802006QEA	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	4		MIL-PRF-38535 Class Q		EIA-422; EIA-423; FED STD 1020; FED STD 1030	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			IN-LINE		4.5 V			4.5 V	2.54 mm	125 Cel	5 V		-55 Cel	TIN LEAD	DUAL	R-GDIP-T16	1	5.08 mm	7.62 mm	Qualified			4	LG-MAX; SEATED HGT-NOM	NO	e0			19.94 mm	120 ns
ISL3284EFHZ-T	Renesas Electronics	LINE RECEIVER	AUTOMOTIVE	GULL WING	6	LSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	1	BICMOS			EIA-485; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, LOW PROFILE, SHRINK PITCH					3 V	.95 mm	125 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G6	2	1.45 mm	1.6 mm				1		NO	e3	30	260	2.9 mm	60 ns
SN65LBC173AD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	BICMOS			EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	.1 Amp	TRUE	4			e4	30	260	9.9 mm	16 ns
5962-0724801VFA	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	3.6 V	4	BIPOLAR	MIL-PRF-38535 Class V		EIA-644; TIA-644	25 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		FLATPACK	FL16,.3	3 V	Line Driver or Receivers	.000012 Amp	3 V	1.27 mm	125 Cel	3.3 V	TOTEM-POLE	-55 Cel	TIN LEAD	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Qualified	8 Amp	TRUE	4		NO	e0			10.16 mm	8 ns
5962-8752401PA	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR	MIL-STD-883		EIA-422; EIA-423; MIL-STD-188-114		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			IN-LINE		4.5 V			4.5 V	2.54 mm	125 Cel	5 V		-55 Cel	TIN LEAD	DUAL	R-GDIP-T8	1	5.08 mm	7.62 mm	Qualified			2			e0				25 ns
5962F9568901VXC	Renesas Electronics	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	300k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	4	CMOS	MIL-PRF-38535 Class V		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				FLATPACK					3 V	1.27 mm	125 Cel			-55 Cel	GOLD	DUAL	R-CDFP-F16		2.92 mm	6.73 mm	Qualified			4			e4				40 ns
ADN4662BRZ-REEL7	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1	CMOS		2.5 ns	EIA-644; TIA-644	9 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	2 Amp		1		NO	e3	30	260	4.9 mm	2.5 ns
ADN4668ARUZ	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	2 Amp		4		NO	e3	30	260	5 mm	2.7 ns
ADN4668ARUZ-REEL7	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	2 Amp		4		NO	e3	30	260	5 mm	2.7 ns
ADV7612BSWZ	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	100	HLFQFP	SQUARE		PLASTIC/EPOXY	YES	1.89 V	1	CMOS			I2C		STANDARD	1.8 V	3.46 V			FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH		3.14 V			1.71 V	.5 mm	85 Cel	3.3 V		-40 Cel	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G100	3	1.6 mm	14 mm	Not Qualified			1		NO	e3	30	260	14 mm	300 ns
AM26LS32/BEA	Rochester Electronics	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, METAL-SEALED COFIRED	NO	5.5 V	4				EIA-422; EIA-423		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.5 V		125 Cel			-55 Cel		DUAL	R-CDIP-T16							4		NO		NOT SPECIFIED	NOT SPECIFIED		38 ns
AM7969-125JC	Rochester Electronics	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE		PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.5 V	1.27 mm	70 Cel			0 Cel		QUAD	S-PQCC-J28		4.572 mm	11.5062 mm				1				NOT SPECIFIED	NOT SPECIFIED	11.5062 mm
DS14C89AM/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	CMOS			EIA-232-E; TIA-232-E; V.28	.9 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	5 V		0 Cel	MATTE TIN	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp	TRUE	4		NO	e3	30	260	8.65 mm	6500 ns
DS26C32AMJ/883	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, METAL-SEALED COFIRED	NO	5.5 V	4	CMOS	MIL-STD-883		EIA-422; EIA-423; FED STD 1020; FED STD 1030	23 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers		4.5 V	2.54 mm	125 Cel	5 V	3-STATE	-55 Cel	TIN LEAD	DUAL	R-CDIP-T16	1	5.08 mm	7.62 mm	Not Qualified	6 Amp	TRUE	4		YES	e0			19.94 mm	35 ns
DS26C32ATN	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	4	CMOS			EIA-422; EIA-423	23 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE	DIP16,.3				4.5 V	2.54 mm	85 Cel		3-STATE	-40 Cel		DUAL	R-PDIP-T16		5.08 mm	7.62 mm		6 Amp	TRUE	4		NO				19.305 mm	30 ns
DS26LS32ACM	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4				EIA-422; EIA-423; FED STD 1020; FED STD 1030	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	1.753 mm	3.9 mm	Not Qualified	8 Amp		4		NO	e0	20	235	9.9 mm	35 ns
DS26LS32CMX	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			EIA-422; EIA-423; FED STD 1020; FED STD 1030	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel	TIN LEAD	DUAL	R-PDSO-G16	1	1.753 mm	3.9 mm	Not Qualified	8 Amp		4		NO	e0	20	235	9.9 mm	25 ns
DS78C20J/883	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC	NO	15 V	2	CMOS	MIL-STD-883		EIA-232-C; EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V		5/15		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel			-55 Cel		DUAL	R-XDIP-T14	1	5.08 mm	7.62 mm	Not Qualified	1.6 Amp		2						19.939 mm	0 ns
DS90CR218AMTD/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644; TIA-644	115 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		-10 Cel	MATTE TIN	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified		TRUE	3		NO	e3	30	260	12.5 mm	0 ns
DS90LV032TMX	National Semiconductor	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES		1	CMOS			EIA-644; IEEE 1596.3		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE						1.27 mm	85 Cel		3-STATE	-40 Cel		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	4						9.9 mm
DS90LV048ATM/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	2 Amp		4		NO	e3	30	260	9.9 mm	2.7 ns
DS90UB914ATRHSRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.89 V	2		AEC-Q100		ISO 10605		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel	MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				2		YES	e3	30	260	7 mm	0 ns
DS90UB936TRGZTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.89 V	2		AEC-Q100		ISO 10605		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQCC-N48	3	1 mm	7 mm				2	ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.045 TO 1.155	NO	e4	30	260	7 mm
DS90UB940NTNKDRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE		UNSPECIFIED	YES	1.26 V	2		AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	1.2 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.14 V	.5 mm	105 Cel	3.3 V		-40 Cel	Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm	9 mm				2	ALSO HAS SUPPLY VOLTAGE RANGING FROM 3 TO 3.6 V	NO	e3	30	260	9 mm
DS90UB962WRTDTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	1.89 V	4		AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel	NICKEL PALLADIUM GOLD SILVER	QUAD	S-PQCC-N64	3	.9 mm	9 mm				4	ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.045 TO 1.155V	NO	e4	30	260	9 mm
DS92LV1212TMSA/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	60 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G28	3	2 mm	5.29 mm	Not Qualified			1			e3	30	260	10.2 mm	0 ns
DS92LV1212TMSAX	National Semiconductor	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	60 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.29 mm	Not Qualified			1		YES	e0	30	235	10.2 mm	0 ns
DS92LX2122SQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		UNSPECIFIED	YES	1.89 V	1				I2C	96 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel	MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		TRUE	21		NO	e3	30	260	7 mm	0 ns
DS96F175ME/883	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	BIPOLAR	MIL-STD-883		EIA-422-A; EIA-423-A; EIA-485	75 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel		QUAD	S-CQCC-N20	1	1.91 mm	8.89 mm	Not Qualified	16 Amp	TRUE	4		NO				8.89 mm	30 ns
EL5375IUZ-T7	Renesas Electronics	LINE RECEIVER	INDUSTRIAL	GULL WING	24	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	3	BIPOLAR			GENERAL PURPOSE	33 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE, SHRINK PITCH	SSOP24,.24		Line Driver or Receivers		2.375 V	.635 mm	85 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G24	3	1.7272 mm	3.9116 mm	Not Qualified			3			e3	30	260	8.6614 mm	0 ns
FIN1032M	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4				EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		4			e3	30	260	9.9 mm	2.5 ns
FIN1032MX	Onsemi	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4				EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		4			e3	30	260	9.9 mm	2.5 ns
HI-8448PCIF	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	NO LEAD	44	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	5.5 V	8	CMOS			ARINC 429		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	Matte Tin (Sn)	QUAD	S-PQCC-N44	3	1 mm	7 mm	Not Qualified			8		YES	e3	40	260	7 mm	0 ns
HI-8451PSI	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	1				ARINC 429	18 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE	SOP8,.25				3 V	1.27 mm	85 Cel			-40 Cel	TIN LEAD	DUAL	R-PDSO-G8	1	1.5 mm	3.9 mm				1	SEATED HEIGHT IS MINIMUM	NO	e0			4.9 mm	300 ns
HI-8451PSIF	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	1				ARINC 429	18 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE	SOP8,.25				3 V	1.27 mm	85 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G8	1	1.5 mm	3.9 mm				1	SEATED HEIGHT IS MINIMUM	NO	e3			4.9 mm	300 ns
HI-8454PCIF	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	5.5 V	4				ARINC 429	20 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20				3 V	.5 mm	85 Cel			-40 Cel	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32	3	1 mm	5 mm				4		NO	e4		260	5 mm	300 ns
HI-8460PSIF	Holt Integrated Circuits	LINE RECEIVER	INDUSTRIAL	GULL WING	8	LSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	1				GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, LOW PROFILE					3 V	1.27 mm	85 Cel			-40 Cel	MATTE TIN	DUAL	R-PDSO-G8		1.5 mm	3.9 mm				1		NO	e3		260	4.9 mm	250 ns
HI-8482SM-01	Holt Integrated Circuits	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2	CMOS			ARINC 429		DIFFERENTIAL SCHMITT TRIGGER	5 V	13.2 V	5,+-12/+-15	-12 V	CHIP CARRIER	LCC20,.35SQ	10.8 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	12 V		-55 Cel	Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.54 mm	8.89 mm	Not Qualified	2 Amp		2	ALSO OPERATES AT +/-15 V SUPPLY	NO	e0	30	245	8.89 mm	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.