LINE RECEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Maximum Receive Delay
ADS58C28IRGC	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.9 V	2	CMOS			GENERAL PURPOSE		DIFFERENTIAL	1.8 V	1.9 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.75 V			1.7 V	.5 mm	85 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64		1 mm	9 mm	Not Qualified			2			e4			9 mm
SN55LBC173J	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	4	BICMOS		35 ns	V.11; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	125 Cel			-55 Cel	1		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified			4		NO				19.56 mm	35 ns
TB5R1LD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	8 Amp		4		NO	e4	30	250	9.9 mm	5 ns
SN55108AJ	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel		OPEN-COLLECTOR	-55 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	25 ns
SN55189AW	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4	BIPOLAR			EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		FLATPACK	FL14,.25		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDFP-F14		2.03 mm	6.285 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	9.21 mm	85 ns
TB5R2DWR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	85 Cel	5 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	250	10.3 mm	5 ns
M38510/10404BFA	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		MIL-PRF-38535 Class B	60 ns			DIFFERENTIAL	5 V				FLATPACK					4.5 V		125 Cel			-55 Cel			DUAL	R-CDFP-F16				Not Qualified					NO					60 ns
SN55LVDS32WR	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	3.6 V	4				EIA-644; TIA-644		DIFFERENTIAL	3.3 V				FLATPACK					3 V	1.27 mm	125 Cel			-55 Cel		TIN LEAD	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified			4		NO	e0			10.16 mm	6.1 ns
JM38510/10404	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR	MIL-M-38510 Class B		GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel		TIN LEAD	DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified			2	ADDITIONAL COMMON STROBE INPUT	NO	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	25 ns
UC5180CN	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	7 V	8	BIPOLAR			EIA232-E; EIA422-A; EIA423-A; V.10; V.11; V.28; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers		3 V	2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T28				Not Qualified	8 Amp		1		NO					550 ns
SN55LBC173MKGD2	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	16	DIE	RECTANGULAR	UNSPECIFIED	YES	5.25 V	4	BICMOS			EIA-422-A; EIA-423-A; EIA-485; CCITT V.11	11 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				UNCASED CHIP					4.75 V		125 Cel		3-STATE	-55 Cel			UPPER	R-XUUC-N16			1.932 mm			TRUE	4		NO				2.04 mm	35 ns
DS99R104TSQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			GENERAL PURPOSE	90 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	2	.8 mm	7 mm	Not Qualified		TRUE	1		NO	e3	30	260	7 mm	0 ns
SCAN921260UJB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	196	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6	CMOS			IEEE 1149.1	660 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		GRID ARRAY, LOW PROFILE	BGA196,14X14,40		Line Driver or Receivers		3 V	1 mm	85 Cel			-40 Cel		TIN LEAD	BOTTOM	S-PBGA-B196	3	1.47 mm	15 mm	Not Qualified			6		NO	e0	20	220	15 mm	0 ns
79008012X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2	BIPOLAR	38535Q/M;38534H;883B		GENERAL PURPOSE	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel			-55 Cel			QUAD	S-CQCC-N20				Not Qualified	16 Amp		2				NOT SPECIFIED	NOT SPECIFIED		75 ns
UC5181CQ	Texas Instruments	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	8	BIPOLAR			EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified	8 Amp		8		NO	e4	30	260	11.505 mm	120 ns
SNJ55ALS195FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	BIPOLAR	MIL-PRF-38535		V.10; V.11; EIA-422-B; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel			-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp		1				NOT SPECIFIED	NOT SPECIFIED	8.89 mm	22 ns
7900801DA	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2	BIPOLAR	MIL-STD-883		GENERAL PURPOSE	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		FLATPACK	FL14,.3		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel			-55 Cel			DUAL	R-GDFP-F14				Not Qualified	16 Amp		2				NOT SPECIFIED	NOT SPECIFIED		75 ns
SN55LVDS32J	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	3.6 V	4	CMOS			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V		3.3		IN-LINE	DIP16,.3		Line Driver or Receivers		3 V	2.54 mm	125 Cel			-55 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	8 Amp		4		NO				19.56 mm	6.1 ns
DS92LV0412SQX	Texas Instruments	LINE RECEIVER		NO LEAD	48		SQUARE	UNSPECIFIED	YES													CHIP CARRIER													QUAD	S-XQCC-N48				Not Qualified
SN55189AFK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	BIPOLAR			EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	85 ns
TB3R2LD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			GENERAL PURPOSE	34 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	8 Amp		4		YES	e4	30	250	9.9 mm	4 ns
DS99R102VSX	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	1	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e0			7 mm
UC5181CQTR	Texas Instruments	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	8	BIPOLAR			EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel			QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified	8 Amp		8		NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm	120 ns
TB3R1LD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			GENERAL PURPOSE	34 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V		-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		YES	e4	30	250	9.9 mm	4 ns
LM4310SM	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2 V	3				GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V				CHIP CARRIER					1.6 V	.4 mm	85 Cel			-40 Cel			QUAD	S-XQCC-N48		.4 mm	6 mm	Not Qualified			3						6 mm
SN55LVDS32FKR	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	4				EIA-644; TIA-644		DIFFERENTIAL	3.3 V				CHIP CARRIER					3 V	1.27 mm	125 Cel			-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified			4		NO				8.89 mm	6.1 ns
TB3R1DE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			GENERAL PURPOSE	34 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	8 Amp		4		YES	e4	30	250	9.9 mm	4 ns
ADS58C48IPFPR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	RECTANGULAR	PLASTIC/EPOXY	YES	1.9 V	4				GENERAL PURPOSE	330 mA	DIFFERENTIAL	1.8 V	1.9 V			FLATPACK		1.7 V		.00001 Amp	1.7 V	.5 mm	85 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	R-PQFP-G80	3	1.2 mm	12 mm	Not Qualified			4		YES	e4	30	260	12 mm	7.5 ns
DS92LV1224TMSA/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	110 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		MATTE TIN	DUAL	R-PDSO-G28	3	2 mm	5.29 mm	Not Qualified			1			e3	30	260	10.2 mm	0 ns
DS32EL0124SQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	2				EIA-644; TIA-644		DIFFERENTIAL	2.5 V	3.465 V	2.5,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3.135 V	Line Driver or Receivers		2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified	.01 Amp		2		YES	e3	30	260	7 mm	0 ns
SN55LBC173W	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.25 V	4	BICMOS		35 ns	V.11; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				FLATPACK					4.75 V	1.27 mm	125 Cel			-55 Cel	1		DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified			4		NO				10.2 mm	35 ns
DS92LV1212AMSAX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	75 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.29 mm	Not Qualified			1		YES	e0	20	235	10.2 mm	0 ns
DS92LV3222TVSX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	UNSPECIFIED	YES	3.465 V	2				GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3.135 V	.5 mm	85 Cel			-40 Cel			QUAD	S-XQFP-G64		1.2 mm	10 mm	Not Qualified			2	IT ALSO NEED 1.8V I/O SUPPLY					10 mm
TB5R2LDW	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		4		NO	e4	30	250	10.3 mm	5 ns
SCAN921260UJBX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	196	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6	CMOS			IEEE 1149.1		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				GRID ARRAY, LOW PROFILE					3 V	1 mm	85 Cel			-40 Cel		TIN LEAD	BOTTOM	S-PBGA-B196	3	1.47 mm	15 mm	Not Qualified			6		NO	e0			15 mm
TB5R2LDWR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			BIPOLAR				40 mA		5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers			1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2			Not Qualified	8 Amp					e4	30	250		0 ns
JM38510/10406	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR	MIL-M-38510 Class B		GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel		TIN LEAD	DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified			2	ADDITIONAL COMMON STROBE INPUT	NO	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	25 ns
TB5R3DRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				GENERAL PURPOSE	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	8 Amp		4		NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	3.5 ns
SN55189J	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR			EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	85 ns
SN55115W	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2	BIPOLAR		50 ns	GENERAL PURPOSE	50 mA	DIFFERENTIAL	5 V		5		FLATPACK	FL16,.3		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel			-55 Cel			DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified	15 Amp	INVERTED	2	CONFIGURABLE TOTEM-POLE OUTPUTS			NOT SPECIFIED	NOT SPECIFIED	10.2 mm	50 ns
DS99R102VS/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1	CMOS				85 mA		3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	3-STATE	0 Cel		MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		TRUE	1		NO	e3	30	260	7 mm	0 ns
DS92LV2412SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1				GENERAL PURPOSE	85 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	9 mm	Not Qualified			1		NO	e3	30	260	9 mm	0 ns
M38510/10402BCX	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		MIL-PRF-38535 Class B	35 ns			STANDARD	5 V			-5 V	FLATPACK					4.5 V		125 Cel			-55 Cel			DUAL	R-CDFP-F14				Not Qualified					NO					35 ns
DS92LV2412SQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1				GENERAL PURPOSE	85 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	9 mm	Not Qualified			1		NO	e3	30	260	9 mm	0 ns
DS92LX2122SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1				I2C	96 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified		COMPLEMENTARY	21		NO	e3	30	260	7 mm	0 ns
SN55LBC173TDA2	Texas Instruments	LINE RECEIVER		NO LEAD	16	DIE	RECTANGULAR	UNSPECIFIED	YES		4	BICMOS			EIA-422-A; EIA-423-A; EIA-485; CCITT V.11	11 mA	DIFFERENTIAL	5 V				UNCASED CHIP									3-STATE				UPPER	R-XUUC-N16			1.932 mm			TRUE	4		NO		NOT SPECIFIED	NOT SPECIFIED	2.04 mm
TDES954RGZR	Texas Instruments	LINE RECEIVER	OTHER	NO LEAD	48	HQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1					279 mA	DIFFERENTIAL	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20			.00019 Amp	1.71 V	.5 mm	85 Cel		OPEN-DRAIN	-20 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm	7 mm		.035 Amp	INVERTED	1		YES	e4	30	260	7 mm
TB5R2DR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	8 Amp		4		NO	e4	30	250	9.9 mm	5 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.