LINE RECEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Maximum Receive Delay
SN55108AW	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	FLATPACK	FL14,.3		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		OPEN-COLLECTOR	-55 Cel			DUAL	R-GDFP-F14		2.03 mm	6.29 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	9.21 mm	25 ns
SN55LVDS32FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	4		CMOS			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V		3.3		CHIP CARRIER	LCC28,.5SQ		Line Driver or Receivers		3 V	1.27 mm	125 Cel			-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	8 Amp		4		NO				8.89 mm	6.1 ns
JM38510/10401BCA	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2		BIPOLAR	MIL-M-38510 Class B		GENERAL PURPOSE		DIFFERENTIAL	5 V	5.5 V		-5 V	IN-LINE		4.5 V			4.5 V	2.54 mm	125 Cel	5 V		-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified			2	ADDITIONAL COMMON STROBE INPUT	NO	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	25 ns
DS99R104TSQ	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N48	2	.8 mm	7 mm	Not Qualified			1		YES	e0			7 mm
N8T14D-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR			GENERAL PURPOSE	100 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	3						9.9 mm	30 ns
SNLVDT3486BDRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4					EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		4			e4	30	260	9.9 mm	6 ns
DS99R421ISQ	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel		TIN LEAD	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified			3		YES	e0			6 mm
DS92LV2422SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	11.5 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N60	3	.8 mm	9 mm	Not Qualified			24		NO	e3	30	260	9 mm	0 ns
DS92LV1260TUJB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	196	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	7		CMOS			GENERAL PURPOSE	530 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		GRID ARRAY, LOW PROFILE	BGA196,14X14,40		Line Driver or Receivers		3 V	1 mm	85 Cel			-40 Cel		TIN LEAD	BOTTOM	S-PBGA-B196	3	1.47 mm	15 mm	Not Qualified			7			e0	20	220	15 mm	0 ns
SCAN921226HSMX	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	BALL	49	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			IEEE 1149.1	120 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA49,7X7,32		Line Driver or Receivers		3 V	.8 mm	125 Cel			-40 Cel		TIN LEAD	BOTTOM	S-PBGA-B49	3	1.5 mm	7 mm	Not Qualified			1			e0	20	235	7 mm	0 ns
100314FMQB	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	24	QFF	SQUARE	CERAMIC, GLASS-SEALED	YES		4							DIFFERENTIAL					FLATPACK						1.27 mm	125 Cel			-55 Cel			QUAD	S-GQFP-F24		2.159 mm	9.398 mm				4		YES				9.398 mm	2.7 ns
DS92LV2422SQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	11.5 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N60	3	.8 mm	9 mm	Not Qualified		TRUE	24		NO	e3	30	260	9 mm	0 ns
SN55107AWR	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			-5 V	FLATPACK					4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDFP-F14		2.03 mm	6.29 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO				9.21 mm	25 ns
DS99R421ISQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3			AEC-Q100		ISO 10605	130 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		TRUE	3		NO	e3	30	260	6 mm	0 ns
SNJ55189J	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4		BIPOLAR	MIL-PRF-38535		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	85 ns
SNJ55189AFK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-PRF-38535		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.0083 Amp	4.5 V	1.27 mm	125 Cel	5 V	TOTEM-POLE	-55 Cel		Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm	85 ns
DS92LV3242TVSX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	UNSPECIFIED	YES	3.465 V	4					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3.135 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	QUAD	S-XQFP-G64		1.2 mm	10 mm	Not Qualified			4	IT ALSO NEED 1.8V I/O SUPPLY		e0			10 mm
DS92LV1210TMSA	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G28		2 mm	5.3 mm				1		NO				10.2 mm	10 ns
DSLVDS1002DBVR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1					EIA-644-A; TIA-644-A		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		3 V			3 V	.95 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G5	1	1.45 mm	1.6 mm				1		NO	e3	30	260	2.9 mm	3.5 ns
SNJ55189AW	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4		BIPOLAR	MIL-PRF-38535		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V	5.5 V	5		FLATPACK	FL14,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V	TOTEM-POLE	-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F14		2.03 mm	6.285 mm	Not Qualified	8.3 Amp	INVERTED	4	RESPONSE CONTROL	NO	e0	NOT SPECIFIED	NOT SPECIFIED	9.21 mm	85 ns
DS99R106VS	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	1	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e0			7 mm
DS560MB410ZASR	Texas Instruments	LINE RECEIVER		BALL	101	TFBGA	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4						DIFFERENTIAL	2.5 V				GRID ARRAY, THIN PROFILE, FINE PITCH	BGA101,11X11,20				2.375 V	.5 mm	85 Cel			-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B101	3	1.2 mm	6 mm				4		NO	e1		260	6 mm
DS560MB410ZAST	Texas Instruments	LINE RECEIVER		BALL	101	TFBGA	SQUARE	PLASTIC/EPOXY	YES	2.625 V	4	4						DIFFERENTIAL	2.5 V				GRID ARRAY, THIN PROFILE, FINE PITCH	BGA101,11X11,20				2.375 V	.5 mm	85 Cel			-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B101	3	1.2 mm	6 mm				4		NO	e1		260	6 mm
D9LVRA2IDEMT	Texas Instruments	LINE RECEIVER		NO LEAD	10		SQUARE	PLASTIC/EPOXY	YES	1.98 V	2		CMOS		7.7 ns	EIA-644; TIA-644	25 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V					SOLCC10(UNSPEC)			.00002 Amp	1.62 V		85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N10	1				4 Amp		2		NO	e4		260		7.7 ns
D9LVRA2DEMR	Texas Instruments	LINE RECEIVER		NO LEAD	10		SQUARE	PLASTIC/EPOXY	YES	1.98 V	2		CMOS		7.7 ns	EIA-644; TIA-644	25 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V					SOLCC10(UNSPEC)			.00002 Amp	1.62 V		70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N10	1				4 Amp		2		NO	e4		260		7.7 ns
D9LVRA2DEMT	Texas Instruments	LINE RECEIVER		NO LEAD	10		SQUARE	PLASTIC/EPOXY	YES	1.98 V	2		CMOS		7.7 ns	EIA-644; TIA-644	25 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V					SOLCC10(UNSPEC)			.00002 Amp	1.62 V		70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N10	1				4 Amp		2		NO	e4		260		7.7 ns
D9LVRA2IDEMR	Texas Instruments	LINE RECEIVER		NO LEAD	10		SQUARE	PLASTIC/EPOXY	YES	1.98 V	2		CMOS		7.7 ns	EIA-644; TIA-644	25 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V					SOLCC10(UNSPEC)			.00002 Amp	1.62 V		85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N10	1				4 Amp		2		NO	e4		260		7.7 ns
SCAN921226SLC/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	49	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			IEEE 1149.1	120 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA49,7X7,32	3 V	Line Driver or Receivers		3 V	.8 mm	85 Cel	3.3 V	3-STATE	-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B49	4	1.5 mm	7 mm	Not Qualified		TRUE	1		NO	e1	30	260	7 mm	0 ns
DS99R421QSQX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	105 Cel			-40 Cel		TIN LEAD	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified			3		YES	e0			6 mm
SNJ55182FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535		GENERAL PURPOSE	14 mA	DIFFERENTIAL	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel			-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp		2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	45 ns
SN55182W	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2		BIPOLAR			GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V		5		FLATPACK	FL14,.25		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDFP-F14		2.03 mm	6.29 mm	Not Qualified	16 Amp	TRUE	2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	9.21 mm	45 ns
DS92LV2422SQ	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					1.71 V	.5 mm	85 Cel			-40 Cel			QUAD	S-XQCC-N60		.8 mm	9 mm	Not Qualified			1						9 mm
MC3550FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	1		BIPOLAR			GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V		+-5	-5 V	CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.75 V	1.27 mm	125 Cel		3-STATE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp	TRUE	4				NOT SPECIFIED	NOT SPECIFIED	8.89 mm	25 ns
TB5R2DRE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	8 Amp		4		NO	e4	30	250	9.9 mm	5 ns
SNJ55107AFK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.5 V	+-5	-5 V	CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	75 Amp	4.5 V	1.27 mm	125 Cel	5 V	TOTEM-POLE	-55 Cel		Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm	25 ns
PDS90LV028AQDQFTQ1	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	NO LEAD	8	VSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	AEC-Q100		EIA-644; TIA-644		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE, VERY THIN PROFILE		3 V			3 V	.5 mm	125 Cel	3.3 V		-40 Cel			DUAL	S-PDSO-N8		.8 mm	2 mm				2		NO				2 mm	2.5 ns
SCAN926260TUF/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	196	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6		CMOS			IEEE 1149.1	600 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		GRID ARRAY, LOW PROFILE	BGA196,14X14,40	3 V	Line Driver or Receivers		3 V	1 mm	85 Cel	3.3 V	3-STATE	-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B196	3	1.47 mm	15 mm	Not Qualified		TRUE	6		NO	e1	30	260	15 mm	0 ns
MC3552FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	1		BIPOLAR			GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V		+-5	-5 V	CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.75 V	1.27 mm	125 Cel		OPEN-COLLECTOR	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp	TRUE	4				NOT SPECIFIED	NOT SPECIFIED	8.89 mm	25 ns
SNJ55107BJ	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2		BIPOLAR	38535Q/M;38534H;883B		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	2		NO		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	25 ns
SN55107AW	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		+-5	-5 V	FLATPACK	FL14,.3		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDFP-F14		2.03 mm	6.29 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	9.21 mm	25 ns
TB5R1LDW	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		4		NO	e4	30	250	10.3 mm	5 ns
SNC55115J	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2		BIPOLAR	MIL-STD-883 Class B (Modified)	50 ns	GENERAL PURPOSE	50 mA	DIFFERENTIAL	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel			-55 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	15 Amp		2	OPEN-COLLECTOR OR TOTEM-POLE OUTPUT			NOT SPECIFIED	NOT SPECIFIED	19.56 mm	50 ns
DSLVDS1002DBVT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1					EIA-644-A; TIA-644-A		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		3 V			3 V	.95 mm	85 Cel	3.3 V		-40 Cel			DUAL	R-PDSO-G5		1.45 mm	1.6 mm				1		NO				2.9 mm	3.5 ns
TB5R3DWR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	8 Amp		4		NO	e4	30	260	10.3 mm	3.5 ns
DS3486M/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4		BIPOLAR			EIA-422; EIA-423	85 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp		1.27 mm	70 Cel	5 V	3-STATE	0 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4			e3	30	260	9.9 mm	35 ns
TB5R2DW	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		4		NO	e4	30	250	10.3 mm	5 ns
SN55189FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR			EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	85 ns
SNJ55108BJ	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2		BIPOLAR	MIL-PRF-38535		GENERAL PURPOSE		DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel			-55 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified	16 Amp		2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	25 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.