LINE RECEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Maximum Receive Delay
TB5R3LDW	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	8 Amp		4		NO	e0	20	220	10.3 mm	3.5 ns
TB3R2D	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			GENERAL PURPOSE	34 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	85 Cel	3.3 V		-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		YES	e4	30	250	9.9 mm	4 ns
SN55115FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR		50 ns	GENERAL PURPOSE	50 mA	DIFFERENTIAL	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel			-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	15 Amp	INVERTED	2	CONFIGURABLE TOTEM-POLE OUTPUTS			NOT SPECIFIED	NOT SPECIFIED	8.89 mm	50 ns
DS92LV3222TVS	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	UNSPECIFIED	YES	3.465 V	2					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3.135 V	.5 mm	85 Cel			-40 Cel			QUAD	S-XQFP-G64		1.2 mm	10 mm	Not Qualified			2	IT ALSO NEED 1.8V I/O SUPPLY					10 mm
TB5R2D	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	85 Cel	5 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	250	9.9 mm	5 ns
M38510/10401BDA	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535 Class B	35 ns		30 mA	STANDARD	5 V		+-5	-5 V	FLATPACK	FL14,.3		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel			-55 Cel			DUAL	R-CDFP-F14				Not Qualified	16 Amp				NO		NOT SPECIFIED	NOT SPECIFIED		35 ns
TB5R2DWRE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		4		NO	e4	30	250	10.3 mm	5 ns
UC5180CQTR	Texas Instruments	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	8		BIPOLAR			EIA232-E; EIA422-A; EIA423-A; V.10; V.11; V.28; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified	8 Amp		8		NO	e4	30	260	11.505 mm	550 ns
DS92LV3242TVS/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		4						265 mA		3.3 V	3.465 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified		TRUE	4		YES	e3	30	260	10 mm	0 ns
TB5R3LDWR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	8 Amp		4		NO	e0	20	220	10.3 mm	3.5 ns
SN55108AFK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		OPEN-COLLECTOR	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	25 ns
UC5180CJ	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	8		BIPOLAR			EIA232-E; EIA422-A; EIA423-A; V.10; V.11; V.28; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel			0 Cel			DUAL	R-GDIP-T28		5.08 mm	7.62 mm	Not Qualified	8 Amp		8		NO		NOT SPECIFIED	NOT SPECIFIED		550 ns
DS92LV1212TMSA	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1					GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G28	1	2 mm	5.29 mm				10	SEATED HGT-NOM	NO	e0	20	235	10.2 mm
7900801DX	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2		BIPOLAR	38535Q/M;38534H;883B		GENERAL PURPOSE	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		FLATPACK	FL14,.3		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel			-55 Cel			DUAL	R-GDFP-F14				Not Qualified	16 Amp		2				NOT SPECIFIED	NOT SPECIFIED		75 ns
N8T14D	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3		BIPOLAR			GENERAL PURPOSE	100 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	16 Amp		3				NOT SPECIFIED	NOT SPECIFIED	9.9 mm	30 ns
DS99R102VSX/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES				CMOS				85 mA		3.3 V		3.3		FLATPACK	TQFP48,.35SQ		Line Driver or Receivers			.5 mm	70 Cel			0 Cel		MATTE TIN	QUAD	S-PQFP-G48	3			Not Qualified						e3	30	260		0 ns
DS32ELX0124	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	2					GENERAL PURPOSE		DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel			QUAD	S-XQCC-N48		.8 mm	7 mm	Not Qualified			2						7 mm
TB5R3LD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		4		NO	e0	30	260	9.9 mm	3.5 ns
SN55115J	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2		BIPOLAR		50 ns	GENERAL PURPOSE	50 mA	DIFFERENTIAL	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers		4.5 V	2.54 mm	125 Cel	5 V		-55 Cel		TIN LEAD	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	15 Amp	INVERTED	2	OPEN-COLLECTOR OR TOTEM-POLE OUTPUT	NO	e0			19.56 mm	50 ns
N8T14N-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR			GENERAL PURPOSE	100 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	3						19.305 mm	30 ns
SCAN926260TUFX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	196	LBGA	SQUARE	PLASTIC/EPOXY	YES		6						600 mA		3.3 V	3.6 V	3.3		GRID ARRAY, LOW PROFILE	BGA196,14X14,40	3 V	Line Driver or Receivers			1 mm	85 Cel	3.3 V	3-STATE	-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B196	3	1.47 mm	15 mm	Not Qualified		TRUE	6		NO	e1	30	260	15 mm	0 ns
DS92LV0422SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					I2C	100 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified			24		NO	e3	30	260	7 mm	0 ns
JM38510/10407	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2		BIPOLAR	MIL-M-38510 Class B		GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel		TIN LEAD	DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified			2	ADDITIONAL COMMON STROBE INPUT	NO	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	25 ns
7802003EA	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4		BIPOLAR	MIL-STD-883		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel			-55 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Qualified	8 Amp		4						19.56 mm	35 ns
TB5R1DR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	8 Amp		4		NO	e4	30	250	9.9 mm	5 ns
DS92LX1622SQE	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					GENERAL PURPOSE	96 mA	DIFFERENTIAL	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20			.00002 Amp	1.71 V	.5 mm	85 Cel			-40 Cel			QUAD	S-XQCC-N40		.8 mm	6 mm		4 Amp		1		NO				6 mm	2.8 ns
ADS58C28IRGCR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.9 V	2		CMOS			GENERAL PURPOSE	163 mA	DIFFERENTIAL	1.8 V	1.9 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.75 V		.00001 Amp	1.7 V	.5 mm	85 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm	Not Qualified			2			e4	30	260	9 mm	0 ns
SNJ55LVDS32FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	HQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	3.6 V	4		CMOS	MIL-PRF-38535		EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG	LCC20,.35SQ	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	125 Cel	3.3 V	TOTEM-POLE	-55 Cel		TIN LEAD	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	8 Amp	TRUE	4		NO	e0			8.89 mm	6.1 ns
SN55LBC173TDA1	Texas Instruments	LINE RECEIVER		NO LEAD	16	DIE	RECTANGULAR	UNSPECIFIED	YES		4		BICMOS			EIA-422-A; EIA-423-A; EIA-485; CCITT V.11	11 mA	DIFFERENTIAL	5 V				UNCASED CHIP									3-STATE				UPPER	R-XUUC-N16			1.932 mm			TRUE	4		NO		NOT SPECIFIED	NOT SPECIFIED	2.04 mm
TB5R1DWR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		4		NO	e4	30	250	10.3 mm	5 ns
SNJ55LBC175J	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	4		BICMOS	MIL-PRF-38535		V.11; EIA-422-A; EIA-423-A; EIA-485	11 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	125 Cel	5 V	3-STATE	-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	4		NO	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	35 ns
TB5R3DWRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	8 Amp		4		NO	e4	30	260	10.3 mm	3.5 ns
DS32EL0124	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	2					GENERAL PURPOSE		DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel			QUAD	S-XQCC-N48		.8 mm	7 mm	Not Qualified			2						7 mm
SNJ55115W	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2		BIPOLAR	MIL-M-38510	50 ns	GENERAL PURPOSE	50 mA	DIFFERENTIAL	5 V	5.5 V	5		FLATPACK	FL16,.3	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V		-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified	15 Amp	INVERTED	2	OPEN-COLLECTOR OR TOTEM-POLE OUTPUT	NO	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm	50 ns
DS3486MX/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR			EIA-422; EIA-423	85 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.753 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e3	30	260	9.9 mm	35 ns
SN55ALS193J	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4		TTL			V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified			1						19.56 mm	22 ns
DS99R421ISQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3			AEC-Q100		ISO 10605	130 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20		Line Driver or Receivers		3 V	.5 mm	105 Cel			-40 Cel		MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified			3			e3	30	260	6 mm	0 ns
SNJ55189AFKR	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-PRF-38535		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V				CHIP CARRIER					4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL	NO				8.89 mm	85 ns
DS1603J/883	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1		BIPOLAR	MIL-STD-883				DIFFERENTIAL	5 V			-5 V	IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm				2	PLUS 3V AND -3V INPUT COMMON MODE VOLTAGE					19.939 mm	25 ns
DS92LV1260TUJB/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	196	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS				530 mA		3.3 V	3.6 V	3.3		GRID ARRAY, LOW PROFILE	BGA196,14X14,40	3 V	Line Driver or Receivers		3 V	1 mm	85 Cel	3.3 V	3-STATE	-40 Cel	10	TIN SILVER COPPER	BOTTOM	S-PBGA-B196	3	1.47 mm	15 mm	Not Qualified		TRUE	6		NO	e1	30	260	15 mm	0 ns
SNJ55189AWR	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4		BIPOLAR	MIL-PRF-38535		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V				FLATPACK					4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel		TIN LEAD	DUAL	R-GDFP-F14		2.03 mm	6.285 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL	NO	e0			9.21 mm	85 ns
DS92LV2422SQX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1					GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					1.71 V	.5 mm	85 Cel			-40 Cel			QUAD	S-XQCC-N60		.8 mm	9 mm	Not Qualified			1						9 mm
M38510/10402BCA	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535 Class B	35 ns		30 mA	STANDARD	5 V		+-5	-5 V	FLATPACK	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel			-55 Cel			DUAL	R-CDFP-F14				Not Qualified	16 Amp				NO		NOT SPECIFIED	NOT SPECIFIED		35 ns
TB5R1DW	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4					GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	85 Cel	5 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	250	10.3 mm	5 ns
SNJ55173FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-PRF-38535		V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485-A; TIA-485-A	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		3-STATE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp	TRUE	4		NO		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	35 ns
DS92LV2412SQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1					GENERAL PURPOSE	85 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	9 mm	Not Qualified			1		NO	e3	30	260	9 mm	0 ns
DS34C86TM	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		CMOS			EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp		4			e0	20	235	9.9 mm	30 ns
INA1651QPWRQ1	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	24 V	1	1		AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL		18 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		2.25 V			4.5 V	.65 mm	125 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm	4.4 mm				1		NO	e4	30	260	5 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.