LINE RECEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN65LVDS86AQDGGG4	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.000025 Amp	3 V	.5 mm	125 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified	.025 Amp	TRUE	3		NO	e4	30	260	12.5 mm		7 ns
SN65LVDT33PWRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	4 Amp		4		NO	e4	30	260	5 mm		6 ns
5962-88649012X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2	BIPOLAR	MIL-PRF-38535		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.5 V		125 Cel			-55 Cel			QUAD	S-CQCC-N20				Not Qualified			4		NO						35 ns
DS90UR907QSQ	Texas Instruments	LINE RECEIVER
DS90CF366MWC	Texas Instruments	LINE RECEIVER	COMMERCIAL	NO LEAD		DIE	UNSPECIFIED	UNSPECIFIED	YES	3.6 V	3				EIA-644; TIA-644		DIFFERENTIAL	3.3 V				UNCASED CHIP					3 V		70 Cel			-10 Cel			UPPER	X-XUUC-N				Not Qualified			3
SN75LVDS388DBTRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	38	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	8				EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	70 Cel			0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	2	1.2 mm	4.4 mm	Not Qualified			8		NO	e4			9.7 mm		4 ns
SN75107AN	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.25 V	+-5	-5 V	IN-LINE	DIP14,.3	4.75 V	Line Driver or Receivers	.000075 Amp	4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm		25 ns
SN75115NSE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		75 ns			DIFFERENTIAL	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified			2			e4	30	260	10.2 mm
SN75127N	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	7	BIPOLAR			GENERAL PURPOSE	47 mA	STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp		7				NOT SPECIFIED	NOT SPECIFIED	19.305 mm		30 ns
SN75C189DG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4	BIPOLAR			EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4	30	260	8.65 mm		6000 ns
DS90UB904QSQE	Texas Instruments	LINE RECEIVER		NO LEAD	48		SQUARE	UNSPECIFIED	YES													CHIP CARRIER													QUAD	S-XQCC-N48				Not Qualified
SN75ALS175NE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-B; EIA-423-B; EIA-485	24 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	8 Amp	TRUE	4		NO	e4			19.305 mm		27 ns
SN75ALS195NE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	TTL			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp		2			e4			19.305 mm		22 ns
V62/07648-01XE	Texas Instruments	LINE RECEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp	TRUE	4		NO	e4	30	260	9.9 mm		27 ns
DS90UH302QSQX/NOPB	Texas Instruments	LINE RECEIVER																																NICKEL PALLADIUM GOLD			3									e4	30	260
5962-9690301Q2A	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2	BIPOLAR	MIL-STD-883 Class Q		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.5 V	+-5	-5 V	CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	75 Amp	4.5 V	1.27 mm	125 Cel	5 V		-55 Cel		Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Qualified	16 Amp		2	ADDITIONAL COMMON STROBE INPUT	NO	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm		25 ns
SN75C189DRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4	BIPOLAR			EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V	6 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL	NO	e4	30	260	8.65 mm		6000 ns
SN65LVDS9637DGKG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	CMOS			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified	8 Amp	TRUE	2		NO	e4	NOT SPECIFIED	260	3 mm		3 ns
DS90CR218AMTDX	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-644; TIA-644	115 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel		TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified			3		NO	e0	20	235	12.5 mm		0 ns
SN65LVDT2YDBVR	Texas Instruments	LINE RECEIVER																																NICKEL PALLADIUM GOLD			1									e4	30	260
MC3452N-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BIPOLAR			GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	4						19.305 mm		25 ns
SN75124N	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	3	BIPOLAR			IBM 360	100 mA	SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers		4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	3		NO	e4			19.305 mm		30 ns
SN65LVDT33MDREP	Texas Instruments	LINE RECEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	25 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	125 Cel			-55 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	4 Amp		4		NO				9.9 mm		8 ns
SN75146DE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR			EIA-232-E; V.28; EIA-422-B; EIA-423-B; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	2	1.75 mm	3.9 mm	Not Qualified	20 Amp	TRUE	2			e4	30	260	4.9 mm		300 ns
LMH0041SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	1				GENERAL PURPOSE	127 mA	DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm			TRUE	5		YES	e3	30	260	7 mm		0 ns
SN65LVDS390DR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	9.9 mm		4 ns
SN75207N-01	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	IN-LINE					4.75 V		70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14				Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT							35 ns
LMH0341SQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	1				GENERAL PURPOSE	127 mA	DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V	OPEN-COLLECTOR	-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm			TRUE	5		YES	e3	30	260	7 mm	2.7 V	0 ns
DS26LS32CMW8	Texas Instruments	LINE RECEIVER		NO LEAD	16	DIE	UNSPECIFIED	UNSPECIFIED	YES	5.25 V	4	TTL			EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				UNCASED CHIP					4.75 V								UPPER	X-XUUC-N16				Not Qualified			1								25 ns
SN75182N-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	BIPOLAR			GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		TRUE	1	BUILT-IN LINE TERMINATION; RESPONSE CONTROL					19.305 mm		45 ns
DS26F32ME/883	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	BIPOLAR	MIL-STD-883		EIA-422; EIA-423; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL	5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers	.00005 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel			QUAD	S-CQCC-N20	1	1.91 mm	8.89 mm	Not Qualified	8 Amp	TRUE	4		NO				8.89 mm		31 ns
SN75ALS197NSRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			V.10; V.11; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	16 Amp		4		NO	e4	30	260	10.2 mm		22 ns
SN75C189AN-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6 V	1	BIPOLAR			EIA-232-D	.7 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.305 mm		6000 ns
DS90CR486VSX	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.46 V	8	CMOS			EIA-644; TIA-644	340 mA	DIFFERENTIAL	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ		Line Driver or Receivers		3.14 V	.5 mm	70 Cel			-10 Cel		TIN LEAD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified			9		NO	e0		260	14 mm		0 ns
5962-9858501QFA	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	3.6 V	4	CMOS	MIL-PRF-38535 Class Q		EIA-422-B; TIA-422-B; V.11	.1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			FLATPACK		3 V			3 V	1.27 mm	125 Cel	3.3 V		-55 Cel		TIN LEAD	DUAL	R-GDFP-F16	1	2.032 mm	6.35 mm	Qualified			4	LG-MAX	NO	e0			9.906 mm		45 ns
SN65HVS881PWPR	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	34 V	1	CMOS		10 ns	GENERAL PURPOSE	8.7 mA	SCHMITT TRIGGER	12 V	34 V	10/34		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	10 V	Line Driver or Receivers		10 V	.65 mm	125 Cel	12 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	2	1.2 mm	4.4 mm	Not Qualified		TRUE	1		NO	e4	30	260	9.7 mm	4 V	14 ns
SN75LVDT386DGGR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	16	CMOS			EIA-644; TIA-644	70 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G64	2	1.2 mm	6.1 mm	Not Qualified	8 Amp	TRUE	16		NO	e4	30	260	17 mm		4 ns
DS10BR254TSQ	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1			.65 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	2		QUAD	S-XQCC-N40		.8 mm	6 mm	Not Qualified			2		YES				6 mm		.65 ns
SN65C189NSLE-00	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	1	BIPOLAR			EIA-232-D	.7 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel			DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					10.2 mm		6000 ns
UA9637ACPSE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2				V.10; V.11; EIA-422-B; EIA-423-B		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm	5.3 mm	Not Qualified			2			e4	30	260	6.2 mm		25 ns
AM26C32IDBRE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			V.10; V.11; EIA-422-B; EIA-423-B		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH					4.5 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified			1		NO	e4	30	260	6.2 mm		27 ns
SN75C189ANSLE	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	1	BIPOLAR			EIA-232-E; V.28	.7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL			NOT SPECIFIED	NOT SPECIFIED	10.2 mm		6000 ns
SN65LVDS2DRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	TTL		3.1 ns	EIA-644-A; TIA-644-A	8 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	2.4 V	Line Driver or Receivers	.00002 Amp	2.4 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		NO	e4	30	260	4.9 mm		3.6 ns
SN75ALS175NS	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified			1			e4	30	260	10.2 mm		27 ns
SN75ALS193NE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR			V.10; V.11; EIA-422-B; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.0004 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	4		NO	e4			19.305 mm		22 ns
UA9637ACD-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR			EIA-422-A; EIA-423-A; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified		TRUE	2						4.9 mm		25 ns
SN75115D-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR			GENERAL PURPOSE	50 mA	DIFFERENTIAL	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		INVERTED	1	CONFIGURABLE TOTEM-POLE OUTPUTS					9.9 mm		75 ns
DS90UB962WRTDRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	4		AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD SILVER	QUAD	S-PQCC-N64	3	.9 mm	9 mm				4	ALSO HAS SUPPLY VOLTAGE RANGING FROM 1.045 TO 1.155V	NO	e4	30	260	9 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.