LINE RECEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS90UB924TRHSRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		AEC-Q100	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			3 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm				1		NO	e3	30	260	7 mm
5962-9583401Q2X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	CMOS	MIL-PRF-38535 Class Q	IEEE P1596.3		DIFFERENTIAL	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel			QUAD	S-CQCC-N20		1.905 mm	8.89 mm	Qualified			4						8.89 mm		8 ns
SN75129DW-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BIPOLAR		IBM 360/370	53 mA	STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified		INVERTED	4						12.8 mm		30 ns
SN65MLVD2DRBTG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		EIA-899; TIA-899	25 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25		Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N8	2	1 mm	3 mm	Not Qualified	8 Amp		1		NO	e4	30	260	3 mm	.48 V	6 ns
SN65LVDT3486BD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	TRUE	4		NO	e4	30	260	9.9 mm		6 ns
LMH0341SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	6			GENERAL PURPOSE	127 mA	STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified			6		NO	e3	30	260	7 mm	2.7 V	0 ns
DS90CR482VS/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8			EIA-644; TIA-644	280 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers	.000015 Amp	3 V	.5 mm	70 Cel	3.3 V	3-STATE	-10 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified		TRUE	9		NO	e4	NOT SPECIFIED	260	14 mm		0 ns
AM26C32CD-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		V.11; EIA-422-A; EIA-423-A		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	4						9.9 mm		30 ns
DS90C185SQE	Texas Instruments	LINE RECEIVER
DS90CR216AMTDX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS	AEC-Q100	EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE	3		NO	e3	30	260	12.5 mm		0 ns
AM26LS32CN	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	TTL		EIA-422; EIA-423; FED STD 1020; FED STD 1030	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel			0 Cel		TIN LEAD	DUAL	R-PDIP-T16	1	4.318 mm	7.62 mm	Not Qualified	8 Amp		4			e0			19.05 mm		25 ns
SN75LBC173DG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BICMOS		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485; V.10; V.11	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	COMPLEMENTARY	1		NO	e4	30	260	9.9 mm		30 ns
DS3603N	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BIPOLAR				DIFFERENTIAL	5 V			-5 V	IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm				2	PLUS 3V AND -3V INPUT COMMON MODE VOLTAGE					19.175 mm		25 ns
SN65C189AN-00	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6 V	1	BIPOLAR		EIA-232-D	.7 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.305 mm		6000 ns
MC3450N	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	BIPOLAR		GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp		4				NOT SPECIFIED	NOT SPECIFIED	19.305 mm		25 ns
AM26LV32CNSLE	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-422-B; TIA-422-B; V.11	17 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers		3 V	1.27 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDSO-G16		2 mm	5.3 mm	Not Qualified	5 Amp	TRUE	4		NO		NOT SPECIFIED	NOT SPECIFIED	10.2 mm		20 ns
SN75ALS125D	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	7	BIPOLAR		IBM 360/370	25 mA	STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	16 Amp		7				NOT SPECIFIED	NOT SPECIFIED	9.9 mm		30 ns
DS90CF364AMTDX	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS		EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		-10 Cel		TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified		TRUE	3		NO	e0	20	235	12.5 mm		0 ns
SN65C189N-00	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6 V	1	BIPOLAR		EIA-232-D	.7 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.305 mm		6000 ns
SN75ALS173NSRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-B; EIA-423-B; EIA-485	24 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	10.2 mm		27 ns
DS90LV001MWC	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD		DIE	UNSPECIFIED	UNSPECIFIED	YES	3.6 V	1	CMOS		EIA-644-A; TIA-644-A		DIFFERENTIAL	3.3 V				UNCASED CHIP					3 V		85 Cel			-40 Cel			UPPER	X-XUUC-N				Not Qualified			1								2 ns
SN65LVDT32BDRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		4			e4	30	260	9.9 mm		6 ns
SN65LVDS302ZXH	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	1.95 V	1			GENERAL PURPOSE	68 mA	DIFFERENTIAL	1.8 V				GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA80,9X9,20			.00002 Amp	1.65 V	.5 mm	85 Cel			-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B80	3	1 mm	5 mm		2 Amp	TRUE	3		NO	e1	30	260	5 mm
5962L9583401VZX	Texas Instruments	LINE RECEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4	CMOS	MIL-PRF-38535 Class V	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			SMALL OUTLINE		4.5 V			4.5 V		125 Cel	5 V		-55 Cel			DUAL	R-GDSO-G16				Qualified			4								8 ns
AM26LS32PC	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	TTL		EIA-422; EIA-423; FED STD 1020; FED STD 1030	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel			0 Cel		TIN LEAD	DUAL	R-PDIP-T16	1	4.318 mm	7.62 mm	Not Qualified	8 Amp		4			e0			19.05 mm		25 ns
THS6072IDR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	15 V		+-5/+-15	-15 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified			2	ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		0 ns
SN65LVDT33DRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		4		NO	e4	30	260	9.9 mm		6 ns
SN75108ADG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V	4.25 V	+-5	-5 V	SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e4	30	260	8.65 mm		25 ns
SN65173D-00	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	4						9.9 mm		35 ns
SN75C189ADB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4	BIPOLAR		EIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		Line Driver or Receivers		4.5 V	.65 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified			4		NO	e4	30	260	6.2 mm		6000 ns
SN75LVDS9637DGK	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2			EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel		TIN LEAD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			2			e0			3 mm		6 ns
5962-8864901FX	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2	BIPOLAR	MIL-PRF-38535	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V				FLATPACK					4.5 V		125 Cel			-55 Cel			DUAL	R-GDFP-F16				Not Qualified			4		NO						35 ns
DS90LV032AWGQML	Texas Instruments	LINE RECEIVER	OTHER	GULL WING	16	SOP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	3.45 V	4	CMOS	MIL-PRF-38535 Class Q	EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		3.15 V	1.27 mm	85 Cel			-55 Cel		Tin/Lead (Sn63Pb37)	DUAL	R-GDSO-G16	1	2.33 mm	6.35 mm	Not Qualified	2 Amp		4			e0	40	260			3.5 ns
DS90UR124QVS	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100	ISO 10605		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel		TIN LEAD	QUAD	S-PQFP-G64	2	1.2 mm	10 mm	Not Qualified			24		NO	e0	30	235	10 mm
SN75LVDS82CDGG	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1			EIA-644		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH						.5 mm	70 Cel			0 Cel			DUAL	R-PDSO-G56		1.2 mm	6.1 mm	Not Qualified			5						14 mm
MC3450N-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BIPOLAR		GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	4						19.305 mm		25 ns
SN75127D	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	7	BIPOLAR		GENERAL PURPOSE	47 mA	STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	16 Amp		7				NOT SPECIFIED	NOT SPECIFIED	9.9 mm		30 ns
V62/05614-02XE	Texas Instruments	LINE RECEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	MIL-STD-883	EIA-644; TIA-644	25 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	125 Cel			-55 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	4 Amp		4		NO				9.9 mm		8 ns
UA9639CP	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR		V.10; V.11; EIA-422-B; EIA-423-B	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers		4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	20 Amp	TRUE	2		NO	e4			9.81 mm		85 ns
DS90CF366MDC	Texas Instruments	LINE RECEIVER	COMMERCIAL	NO LEAD		DIE	UNSPECIFIED	UNSPECIFIED	YES	3.6 V	3			EIA-644; TIA-644		DIFFERENTIAL	3.3 V				UNCASED CHIP					3 V		70 Cel			-10 Cel			UPPER	X-XUUC-N				Not Qualified			3
SN65LVDS349PW	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		EIA-644-A; TIA-644-A	20 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	4 Amp	TRUE	4		YES	e4	30	260	5 mm		6 ns
5962-7900801VCX	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR	MIL-PRF-38535 Class V	GENERAL PURPOSE		DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Qualified			2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED			45 ns
SN75C189DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4	BIPOLAR		EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V	6 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.0083 Amp	4.5 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4	NOT SPECIFIED	260	8.65 mm		6000 ns
SN75107BJ	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	2	BIPOLAR		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	19.56 mm		25 ns
DS90CF386SLC	Texas Instruments	LINE RECEIVER	COMMERCIAL	BALL	64	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		EIA-644; TIA-644	135 mA	DIFFERENTIAL	3.3 V		3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA64,8X8,32		Line Driver or Receivers		3 V	.8 mm	70 Cel			-10 Cel			BOTTOM	S-PBGA-B64	3	1.5 mm	8 mm	Not Qualified			4				20	235	8 mm		0 ns
SN75141PSLE	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V		5		SMALL OUTLINE	SOP8,.3		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G8		2 mm	5.3 mm	Not Qualified	16 Amp	INVERTED	2				NOT SPECIFIED	NOT SPECIFIED	6.2 mm		35 ns
DS90CR286AMTDX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		EIA-644; TIA-644	105 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified			4			e0	20	235	14 mm		0 ns
DS90CF384AMTDX	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel		TIN LEAD	DUAL	R-PDSO-G56	2	1.1 mm	6.1 mm	Not Qualified			4			e0	20	235	14 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.