LINE RECEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN65LBC173N	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485; V.10; V.11	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	4		NO	e4			19.305 mm		30 ns
THS6062CDG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	16 V	2				GENERAL PURPOSE		DIFFERENTIAL	15 V			-15 V	SMALL OUTLINE					2.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified			2	ALSO OPERATES AT 5V TO 32V SINGLE SUPPLY	NO	e4	30	260	4.9 mm		0 ns
SN75ALS125J	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	7	BIPOLAR			IBM 360/370	25 mA	STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp		7				NOT SPECIFIED	NOT SPECIFIED	19.56 mm		30 ns
SN75154DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR			EIA-232-E; TIA-232-E; V.28	35 mA	SCHMITT TRIGGER	5 V	13.2 V	5/12		SMALL OUTLINE	SOP16,.25	10.8 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	INVERTED	4	OPTIONAL +12V SUPPLY; RESPONSE CONTROL	NO	e4	NOT SPECIFIED	260	9.9 mm		0 ns
DS90CR562MTD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1	CMOS			EIA-644; TIA-644	80 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers			.5 mm	70 Cel			-10 Cel		TIN LEAD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE	4			e0		235	12.5 mm		0 ns
SN75LVDS386DGG	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	16	CMOS			EIA-644; TIA-644	70 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	70 Cel	3.3 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G64	2	1.2 mm	6.1 mm	Not Qualified	8 Amp	TRUE	16		NO	e4	30	260	17 mm		4 ns
SN75207BNSRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified	16 Amp		2	ADDITIONAL COMMON STROBE INPUT	NO	e4	30	260	10.2 mm		35 ns
SN65LVDS390PWG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	5 mm		4 ns
DS26LS32CM/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	BIPOLAR			EIA-422; EIA-423; FED STD 1020; FED STD 1030	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers			1.27 mm	70 Cel			0 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		4			e3	30	260	9.9 mm		25 ns
DS90CR484VJD/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8	CMOS		51.69 ns	EIA-644; TIA-644	280 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	70 Cel	3.3 V	3-STATE	-10 Cel	8	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified		COMPLEMENTARY	8		YES	e4	NOT SPECIFIED	260	14 mm	2.7 V	97.4 ns
AM26LS33ACN-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR			EIA-422-A; EIA-423-A		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	4						19.305 mm		35 ns
SN75LVDS32DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel	3.3 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	9.9 mm		6 ns
THS6062IDGNG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	16 V	2				GENERAL PURPOSE		DIFFERENTIAL	15 V			-15 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH					2.5 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm	3 mm	Not Qualified			2	ALSO OPERATES AT 5V TO 32V SINGLE SUPPLY	NO	e4	30	260	3 mm		0 ns
SN75189ADG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR			EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e4	30	260	8.65 mm		85 ns
5962-9076603QFX	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.25 V	4	BICMOS	MIL-PRF-38535 Class Q		V.11; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V			FLATPACK		4.75 V			4.75 V	1.27 mm	125 Cel	5 V		-55 Cel		TIN LEAD	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Qualified			4			e0	NOT SPECIFIED	NOT SPECIFIED	10.2 mm		35 ns
THS6072IDGNG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	16.5 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	15 V		+-5/+-15	-15 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.5 V	.65 mm	85 Cel			-40 Cel			DUAL	S-PDSO-G8		1.07 mm	3 mm	Not Qualified			2	ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	3 mm		0 ns
SN65LVDT9637BD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	BICMOS			EIA-644; TIA-644	12 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V		-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		2		NO	e4	30	260	4.9 mm		6 ns
AM26LS32ACD-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			EIA-422-A; EIA-423-A		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	4						9.9 mm		35 ns
SN65LVDT348PWG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-644-A; TIA-644-A	20 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	4 Amp	TRUE	4		NO	e4	30	260	5 mm		6 ns
SN74LS2323D	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	TTL			GENERAL PURPOSE		GATED	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	24 Amp		1		NO	e4	30	260	4.9 mm		35 ns
5962-88745012A	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2	BIPOLAR	MIL-STD-883		GENERAL PURPOSE	50 mA	DIFFERENTIAL	5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V		-55 Cel		TIN LEAD	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Qualified	15 Amp	INVERTED	2	OPEN-COLLECTOR OR TOTEM-POLE OUTPUT	NO	e0			8.89 mm		50 ns
SN65LVDT390DR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	8 Amp		4		NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm		4 ns
SN75107AN-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT					19.305 mm		25 ns
SN75182NE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	BIPOLAR			GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V	5.5 V	5		IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	.000005 Amp	4.5 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm		45 ns
AM26LS32AMJ	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers		4.5 V	2.54 mm	125 Cel	5 V	3-STATE	-55 Cel		TIN LEAD	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	8 Amp	TRUE	4		NO	e0			19.56 mm		35 ns
SN75173DRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485-A; TIA-485-A	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	4		NO	e4	30	260	9.9 mm		35 ns
DS90UB902QSQE	Texas Instruments	LINE RECEIVER		NO LEAD	40		SQUARE	UNSPECIFIED	YES													CHIP CARRIER													QUAD	S-XQCC-N40				Not Qualified
SN75175DE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	16 Amp		4		NO	e4	30	260	9.9 mm		35 ns
SN65LVDS32BDG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		4		NO	e4	NOT SPECIFIED	260	9.9 mm		6 ns
SN75175N-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	2						19.305 mm		35 ns
SN65175D-00	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	2						9.9 mm		35 ns
5962-7900801VDX	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	QFF	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2	BIPOLAR	MIL-PRF-38535 Class V		GENERAL PURPOSE		DIFFERENTIAL	5 V				FLATPACK					4.5 V	1.27 mm	125 Cel			-55 Cel			DUAL	R-GDFP-F14		2.03 mm	6.285 mm	Qualified			2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	9.21 mm		45 ns
SN75C189ADBE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4	BIPOLAR			EIA-232-F; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH					4.5 V	.65 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified			4		NO	e4	30	260	6.2 mm		6000 ns
SN65LV1224ADBR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				GENERAL PURPOSE	95 mA	STANDARD	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified			1		YES		NOT SPECIFIED	NOT SPECIFIED	10.2 mm		0 ns
SN65LVDS32NSRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	8 Amp		4		NO	e4	30	260	10.2 mm		3 ns
SN75207D-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT					8.65 mm		35 ns
DS90CR218AMTDX/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	115 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		-10 Cel		MATTE TIN	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE	4		YES	e3	30	260	12.5 mm		0 ns
SN75C189ADRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4	BIPOLAR			EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V	6 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL	NO	e4	30	260	8.65 mm		6000 ns
SN75125J-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1	BIPOLAR			IBM 360/370	47 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		INVERTED	7						19.56 mm		30 ns
DS90UR906QSQ	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1				I2C		DIFFERENTIAL SCHMITT TRIGGER	1.8 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					1.71 V	.5 mm	105 Cel			-40 Cel	1		QUAD	S-XQCC-N60		.8 mm	9 mm	Not Qualified			1		YES				9 mm
MC3486DG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	85 mA	DIFFERENTIAL	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	9.9 mm		35 ns
MC1489DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR			EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL	NO				8.65 mm		85 ns
SN65173DR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485-A; TIA-485-A	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	4		NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm		35 ns
SN65LVDS96DGGR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS			EIA-644; TIA-644	82 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified	.02 Amp	TRUE	3		NO	e4	30	260	12.5 mm		0 ns
SN75LBC175ANE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BICMOS			EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	8 Amp		4		NO	e4			19.305 mm		16 ns
SN75LBC175DRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BICMOS			V.11; EIA-422-A; EIA-423-A; EIA-485	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	2		NO	e4	30	260	9.9 mm		30 ns
DS90UB904QSQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	1		AEC-Q100		GENERAL PURPOSE	96 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N48	3	.8 mm	7 mm	Not Qualified		TRUE	1			e3	30	260	7 mm		0 ns
MC1489ANSLE	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.05 V	1	BIPOLAR			V.28; EIA-232-E	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.95 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL			NOT SPECIFIED	NOT SPECIFIED	10.2 mm		85 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.