LINE RECEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS26F32MWG-QMLV	Texas Instruments	LINE RECEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	BIPOLAR	MIL-PRF-38535 Class V	EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	125 Cel			-55 Cel			DUAL	R-CDSO-G16		2.33 mm	6.35 mm	Not Qualified			4	LG_MAX	NO				9.91 mm		31 ns
SN75141P-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BIPOLAR		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified		INVERTED	2						9.81 mm		35 ns
SN65LVDS9637DGNG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	CMOS		EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	SSOP8,.19	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm	3 mm	Not Qualified	8 Amp	COMPLEMENTARY	2		NO	e4	30	260	3 mm		3 ns
SN75107BNE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified	16 Amp		2	ADDITIONAL COMMON STROBE INPUT	NO	e4			19.305 mm		25 ns
5962-86888012X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		MIL-PRF-38535	EIA-232-C		SCHMITT TRIGGER	5 V				CHIP CARRIER					4.5 V		125 Cel			-55 Cel			QUAD	R-CQCC-N20				Not Qualified			4		NO						127 ns
LMH0071SQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	1			GENERAL PURPOSE		DIFFERENTIAL	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm				5		YES	e3	30	260	7 mm		0 ns
SN65175DG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	4		NO	e4	30	260	9.9 mm		35 ns
SN65MLVD3DRBRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		EIA-899; TIA-899	25 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25		Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N8	2	1 mm	3 mm	Not Qualified	8 Amp		1		NO	e4	30	260	3 mm	.48 V	6 ns
DS90LV032ATM	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		EIA-644; TIA-644	.02 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	2 Amp	TRUE	4		NO	e0	20	235	9.9 mm		3.3 ns
AM26C32MFKR	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	BICMOS		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.5 V	1.27 mm	125 Cel		3-STATE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified		TRUE	4		NO				8.89 mm		27 ns
MC1489ANE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	BIPOLAR		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4			19.305 mm		85 ns
DS90CF364AMTD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS		EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		-10 Cel		TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified		TRUE	3		NO	e0	20	235	12.5 mm		0 ns
5962-7900801VDA	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	QFF	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2	BIPOLAR	MIL-PRF-38535 Class V	GENERAL PURPOSE	15 mA	DIFFERENTIAL	5 V	5.5 V	5		FLATPACK	FL14,.25	4.5 V	Line Driver or Receivers	.000005 Amp	4.5 V	1.27 mm	125 Cel	5 V	OPEN-EMITTER	-55 Cel		TIN LEAD	DUAL	R-GDFP-F14		2.03 mm	6.285 mm	Qualified	.016 Amp	TRUE	2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO	e0			9.21 mm		45 ns
SN75LVDS388ADBT	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	38	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	8	CMOS		EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	70 Cel	3.3 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	2	1.2 mm	4.4 mm	Not Qualified	8 Amp	TRUE	8		NO	e4	30	260	9.7 mm		4 ns
MC3452N	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	BIPOLAR		GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp		4				NOT SPECIFIED	NOT SPECIFIED	19.305 mm		25 ns
SN65LVDT352PWR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-644-A; TIA-644-A	20 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	2	1.2 mm	4.4 mm	Not Qualified	4 Amp	TRUE	4		NO	e4	30	260	7.8 mm		6 ns
SN75ALS127J-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1	BIPOLAR		IBM 360/370	47 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		INVERTED	7						19.56 mm		30 ns
SN65LVDT388ADB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	38	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	8			EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G38		1.2 mm	4.4 mm				8		NO				9.7 mm		4 ns
UA9639ACP-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		EIA-422-A; EIA-423-A; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified		TRUE	2						9.81 mm		85 ns
SN75ALS175N-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A; EIA-485	24 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	2						19.305 mm		27 ns
SN75ALS127N	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	7	BIPOLAR		IBM 360/370	25 mA	STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp		7				NOT SPECIFIED	NOT SPECIFIED	19.305 mm		30 ns
SN75157P-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		EIA-422-A; EIA-423-A; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified		TRUE	2						9.81 mm		25 ns
DS90CF564MTD/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	CMOS		EIA-644; TIA-644		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	4.75 V	Line Driver or Receivers			.5 mm	70 Cel	5 V		-10 Cel		MATTE TIN	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE	4		NO	e3	30	260	12.5 mm		0 ns
5962-9076604Q2A	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	4	BICMOS	MIL-PRF-38535 Class Q	EIA-485	11 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		CHIP CARRIER	LCC20,.35SQ	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4	TIN LEAD	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Qualified	16 Amp	TRUE	4		NO	e0			8.89 mm		35 ns
SN75175J	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	4	BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel			0 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp		4		NO		NOT SPECIFIED	NOT SPECIFIED	19.56 mm		35 ns
SN65LVDS314RSKR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.95 V	4	CMOS			102.3 mA		1.8 V	1.95 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC64,.32SQ,16	1.65 V	Line Driver or Receivers	.00002 Amp	1.65 V	.4 mm	85 Cel	1.8 V		-40 Cel	4	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	8 mm	Not Qualified		TRUE			NO	e4	30	260	8 mm		0 ns
SN75182NSRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BIPOLAR		GENERAL PURPOSE	14 mA	DIFFERENTIAL	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified	16 Amp		2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO	e4	30	260	10.2 mm		45 ns
SN75107BDRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.25 V	+-5	-5 V	SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.000075 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e4	NOT SPECIFIED	260	8.65 mm		25 ns
SN75127D-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR		IBM 360/370	47 mA	STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		INVERTED	7						9.9 mm		30 ns
SN75ALS199DRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		V.10; V.11; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	2		NO	e4	30	260	9.9 mm		22 ns
DS90CR216MTDX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS		EIA-644; TIA-644	105 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel		TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm	6.1 mm	Not Qualified		TRUE	3		NO	e0	20	235	12.5 mm	2.7 V	0 ns
DS90CR286MTD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		TIN LEAD	DUAL	R-PDSO-G56	2	1.1 mm	6.1 mm	Not Qualified		COMPLEMENTARY	4		NO	e0	20	235	14 mm		0 ns
SN65LVDS33MDREPR	Texas Instruments	LINE RECEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		EIA-644; TIA-644	25 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	125 Cel			-55 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	4 Amp		4		NO				9.9 mm		8 ns
DS90C185SQX	Texas Instruments	LINE RECEIVER
SN65LV1224DB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		GENERAL PURPOSE	110 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified			1		NO	e4	30	260	10.2 mm		2.5 ns
SN75157DRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified		TRUE	2		NO	e4	30	260	4.9 mm		25 ns
DS90C187LFE	Texas Instruments	LINE RECEIVER
SN75189NSRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified	10 Amp		4	RESPONSE CONTROL	NO	e4	30	260	10.2 mm		85 ns
SN65C189ANSLE-00	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	1	BIPOLAR		EIA-232-D	.7 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel			DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					10.2 mm		6000 ns
SN75189AD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.0083 Amp	4.5 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4	NOT SPECIFIED	260	8.65 mm		85 ns
SN75154NSLE-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR		EIA-232-C	35 mA	SCHMITT TRIGGER	5 V	13.2 V			SMALL OUTLINE		10.8 V			4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel			DUAL	R-PDSO-G16		2 mm	5.3 mm	Not Qualified		INVERTED	4						10.2 mm
SN75124NSRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3	BIPOLAR		IBM 360	100 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	16 Amp		3		NO	e4	30	260	10.2 mm		30 ns
MC1489N-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1	BIPOLAR		EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				IN-LINE						2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.305 mm		85 ns
SN75LBC173DRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BICMOS		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485; V.10; V.11	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	1		NO	e4	NOT SPECIFIED	260	9.9 mm		30 ns
SN75154J	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1	BIPOLAR		EIA-232-C	35 mA	SCHMITT TRIGGER	5 V		5/12		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	INVERTED	4	OPTIONAL +12V SUPPLY; RESPONSE CONTROL			NOT SPECIFIED	NOT SPECIFIED	19.56 mm		0 ns
SN75173NSE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4			V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified			4			e4	30	260	10.2 mm		35 ns
DS90UR916QSQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100		110 mA			1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-PQCC-N60	3	.8 mm	9 mm	Not Qualified		COMPLEMENTARY	1		YES	e3	30	260	9 mm		0 ns
5962-8688801CX	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4		MIL-PRF-38535	EIA-232-C		SCHMITT TRIGGER	5 V				IN-LINE					4.5 V		125 Cel			-55 Cel			DUAL	R-GDIP-T14				Not Qualified			4		NO						127 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.