LINE RECEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN65LVDT352PW	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-644-A; TIA-644-A	20 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	2	1.2 mm	4.4 mm	Not Qualified	4 Amp	TRUE	4		NO	e4	30	260	7.8 mm		6 ns
SN75207BN	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.25 V	+-5	-5 V	IN-LINE	DIP14,.3	4.75 V	Line Driver or Receivers	.000075 Amp	4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e4			19.305 mm		35 ns
5962L9583401VZA	Texas Instruments	LINE RECEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	500k Rad(Si)	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	CMOS	MIL-PRF-38535 Class V	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			SMALL OUTLINE		4.5 V			4.5 V		125 Cel	5 V		-55 Cel	4	TIN LEAD	DUAL	R-CDSO-G16	1			Qualified			4			e0					8 ns
SN75175D	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	4		NO	e4	30	260	9.9 mm		35 ns
SN65LVDS352PW	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	24	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-644-A; TIA-644-A	20 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP24,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	2	1.2 mm	4.4 mm	Not Qualified	4 Amp	COMPLEMENTARY	4		NO	e4	30	260	7.8 mm		6 ns
LMH0041SQX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	2.625 V	6			GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified			6		NO	e0	30	235	7 mm
DS90CF388AVJD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	8			EIA-644; TIA-644		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			-10 Cel		TIN LEAD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified			8		YES	e0		260	14 mm
SN65C189DB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	6 V	1	BIMOS		EIA-232-D	.7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel			DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL			NOT SPECIFIED	NOT SPECIFIED	6.2 mm		6000 ns
AM26C32CNSLE	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		V.10; V.11; EIA-422-B; EIA-423-B	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDSO-G16		2 mm	5.3 mm	Not Qualified	6 Amp	TRUE	4				NOT SPECIFIED	NOT SPECIFIED	10.2 mm		27 ns
5962-9583401VFA	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4	CMOS	MIL-PRF-38535 Class V	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			FLATPACK		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4	TIN LEAD	DUAL	R-GDFP-F16	1	2.032 mm	6.604 mm	Qualified			4			e0			9.6645 mm		8 ns
SN75207BDE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.25 V	+-5	-5 V	SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers	.000075 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e4	30	260	8.65 mm		35 ns
AM26LS33ACDE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		4		NO	e4	30	260	9.9 mm		35 ns
SN65LBC173ADG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4	BICMOS		EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4			e4	30	260	9.9 mm		16 ns
SN75129N-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	2	BIPOLAR		IBM 360/370	53 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T20		5.08 mm	7.62 mm	Not Qualified		INVERTED	4						24.325 mm		30 ns
SN74LS2323DE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	2	TTL		GENERAL PURPOSE		GATED	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	24 Amp		1		NO	e4	30	260	4.9 mm		35 ns
SN75173J-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	1	BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	4						19.56 mm		35 ns
DS3650N	Texas Instruments	LINE RECEIVER	COMMERCIAL			DIP					5.25 V	4	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V						4.75 V	2.54 mm	70 Cel			0 Cel						5.08 mm	7.62 mm				4		NO				21.755 mm		25 ns
SN65LVDT348PWR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-644-A; TIA-644-A	20 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	4 Amp	TRUE	4		NO	e4	30	260	5 mm		6 ns
SN75LVDS388ADBTG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	38	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	8	CMOS		EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	2	1.2 mm	4.4 mm	Not Qualified	8 Amp		8		NO	e4	30	260	9.7 mm		4 ns
5962-7802004MFX	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4	BIPOLAR	MIL-STD-883	EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V			FLATPACK		4.75 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel		TIN LEAD	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Qualified			4			e0	NOT SPECIFIED	NOT SPECIFIED	10.2 mm		35 ns
5962-7802003MFA	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	QFF	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4	BIPOLAR	MIL-STD-883	EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		FLATPACK	FL16,.3	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Qualified	8 Amp	TRUE	4		NO	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm		35 ns
SN75LVDT388DBTR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	38	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	8	CMOS		EIA-644; TIA-644	70 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel	8		DUAL	R-PDSO-G38		1.2 mm	4.4 mm	Not Qualified	8 Amp		8		NO		NOT SPECIFIED	NOT SPECIFIED	9.7 mm		4 ns
SN75C189ANSE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	6 V	4	BIPOLAR		EIA-232-F; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified			4		NO	e4	30	260	10.2 mm		6000 ns
DS90CR288ASLCX	Texas Instruments	LINE RECEIVER	COMMERCIAL	BALL	64	LFBGA	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1	CMOS		EIA-644; TIA-644		DIFFERENTIAL	3.3 V				GRID ARRAY, LOW PROFILE, FINE PITCH					3 V	.8 mm	70 Cel			-10 Cel		TIN LEAD	BOTTOM	S-PBGA-B64	3	1.5 mm	8 mm	Not Qualified			4		YES	e0			8 mm		3.5 ns
SN75128J-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR		IBM 360/370	53 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T20		5.08 mm	7.62 mm	Not Qualified		INVERTED	4						24.195 mm		30 ns
5962-9164001Q2A	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	BICMOS	MIL-PRF-38535 Class Q	EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel		TIN LEAD	QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Qualified	6 Amp	TRUE	4		NO	e0			8.89 mm		27 ns
SN75C189ANSR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	6 V	4	BIPOLAR		EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V	6 V	5		SMALL OUTLINE	SOP14,.3	4.5 V	Line Driver or Receivers	.0083 Amp	4.5 V	1.27 mm	70 Cel	5 V		0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified	3.2 Amp		4	RESPONSE CONTROL	NO	e4	NOT SPECIFIED	260	10.2 mm		6000 ns
SN65LBC175ANR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4	BICMOS		EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified			4		NO	e4			19.305 mm		16 ns
DS90C124QVSX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1		AEC-Q100	GENERAL PURPOSE	85 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		TRUE	1		NO	e3	30	260	7 mm		0 ns
SN75LVDS388ADBTR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	38	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	8	CMOS		EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel			DUAL	R-PDSO-G38		1.2 mm	4.4 mm	Not Qualified	8 Amp		8		NO		NOT SPECIFIED	NOT SPECIFIED	9.7 mm		4 ns
SN75107BNSRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified	16 Amp		2	ADDITIONAL COMMON STROBE INPUT	NO	e4	30	260	10.2 mm		25 ns
SN65LVDT34D	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	2	BICMOS		EIA-644; TIA-644	12 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	4.4 mm	Not Qualified	4 Amp	TRUE	2		NO	e4	30	260	4.9 mm		6 ns
DS26F32MW-QMLV	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4	BIPOLAR	MIL-PRF-38535 Class V	EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL	5 V				FLATPACK					4.5 V	1.27 mm	125 Cel			-55 Cel			DUAL	R-GDFP-F16		2.032 mm	6.73 mm	Not Qualified			4	LG_MAX	NO				10.16 mm		31 ns
SN65MLVD2DRBRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE		PLASTIC/EPOXY	YES	3.6 V	1	CMOS		EIA-899; TIA-899	25 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25		Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N8	2	1 mm	3 mm	Not Qualified	8 Amp		1		NO	e4	30	260	3 mm	.48 V	6 ns
SN75125N-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	1	BIPOLAR		IBM 360/370	47 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		INVERTED	7						19.305 mm		30 ns
SN65LVDS302ZQER	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	80	VFBGA	SQUARE		PLASTIC/EPOXY	YES	1.95 V	1	CMOS		GENERAL PURPOSE	68 mA	DIFFERENTIAL	1.8 V	1.95 V	1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA80,9X9,20	1.65 V	Line Driver or Receivers	.00002 Amp	1.65 V	.5 mm	85 Cel	1.8 V		-40 Cel	3	TIN SILVER COPPER	BOTTOM	S-PBGA-B80	3	1 mm	5 mm	Not Qualified	2 Amp	TRUE	3		NO	e1	30	260	5 mm		0 ns
SN75207BNS	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR				DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified			2			e4	30	260	10.2 mm		20 ns
SN65LVDS3486AD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	CMOS		EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	8 Amp		4		YES		NOT SPECIFIED	NOT SPECIFIED	9.9 mm		6 ns
5962-7802006Q2A	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		MIL-PRF-38535 Class Q	EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.5 V	1.27 mm	125 Cel			-55 Cel			QUAD	S-CQCC-N20		1.91 mm	8.89 mm	Not Qualified			4		NO				8.89 mm		120 ns
SN75182DRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	2	BIPOLAR		GENERAL PURPOSE	14 mA	DIFFERENTIAL	5 V		5		SMALL OUTLINE	TSSOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	16 Amp		2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO	e4	30	260	8.65 mm		45 ns
SN75108BN-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-COLLECTOR	0 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT					19.305 mm		25 ns
DS90CR482VSX/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE		PLASTIC/EPOXY	YES	3.6 V	8			EIA-644; TIA-644	280 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers	.000015 Amp	3 V	.5 mm	70 Cel	3.3 V	3-STATE	-10 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified		TRUE	9		NO	e4	NOT SPECIFIED	260	14 mm		0 ns
SN65LVDT348DR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-644-A; TIA-644-A	20 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		4		NO	e4	30	260	9.9 mm		6 ns
SN75ALS127J	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	7	BIPOLAR		IBM 360/370	25 mA	STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp		7				NOT SPECIFIED	NOT SPECIFIED	19.56 mm		30 ns
DS90C032TMX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4	CMOS		EIA-644; TIA-644; IEEE 1596.3		DIFFERENTIAL	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	2 Amp	TRUE	4		YES	e0	20	235	9.9 mm		6 ns
SN75LVDS390DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4	CMOS		EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	9.9 mm		4 ns
AM26C32-W	Texas Instruments	LINE RECEIVER
SN65LVDT32BDG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4			EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		4		NO	e4	NOT SPECIFIED	260	9.9 mm		6 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.