LINE RECEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS90LV032MDS	Texas Instruments	LINE RECEIVER																																					1
5962-86888022A	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V	5.5 V	5		CHIP CARRIER	LCC20,.35SQ	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V	OPEN-COLLECTOR	-55 Cel		Tin/Lead (Sn/Pb)	QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified	8.3 Amp	TRUE	4	RESPONSE CONTROL	NO	e0	NOT SPECIFIED	NOT SPECIFIED	8.89 mm		85 ns
SN65LBC173AMDREP	Texas Instruments	LINE RECEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BICMOS			EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	32 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V			SMALL OUTLINE		4.75 V			4.75 V	1.27 mm	125 Cel	5 V		-55 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm				4		NO	e4	30	260	9.9 mm		18 ns
SN65LVDS9637D	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	2		CMOS			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.01 Amp	TRUE	2		NO	e4	NOT SPECIFIED	260	4.9 mm		3 ns
SN75ALS197NS	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR			V.10; V.11; X.26; X.27		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified			4			e4	30	260	10.2 mm		22 ns
DS90C185SQ/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES		5				93.96 ns		85 mA		1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	1.71 V	Line Driver or Receivers			.4 mm	70 Cel	1.8 V	DIFFERENTIAL	-10 Cel		MATTE TIN	QUAD	S-PQCC-N48	1	.8 mm		6 mm	Not Qualified		COMPLEMENTARY	5		YES	e3	30	260	6 mm		0 ns
SN75107BJ-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	1		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT					19.56 mm		25 ns
DS90LV032AW-MLS	Texas Instruments	LINE RECEIVER	OTHER	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	3.45 V	4		CMOS	MIL-STD-883		EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V	3.45 V	3.3		FLATPACK	FL16,.3	3.15 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	85 Cel	3.3 V	3-STATE	-55 Cel		TIN LEAD	DUAL	R-GDFP-F16	1	2.032 mm		6.35 mm	Not Qualified	2 Amp	TRUE	4		NO	e0			9.906 mm	.25 V	3.5 ns
SN75108BD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		OPEN-COLLECTOR	0 Cel			DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		25 ns
DS90C032W-QMLV	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	QFF	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4		CMOS	MIL-PRF-38535 Class V		IEEE P1596.3	11 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		FLATPACK	FL16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4	TIN LEAD	DUAL	R-GDFP-F16	1	2.032 mm		6.604 mm	Not Qualified	2 Amp		4		NO	e0			9.6645 mm		8 ns
SN65LVDS314RSK	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	QCCN	SQUARE		PLASTIC/EPOXY	YES								102.3 mA				1.8,1.8/3.3		CHIP CARRIER	LCC64,.32SQ,16		Line Driver or Receivers			.4 mm	85 Cel			-40 Cel			QUAD	S-PQCC-N64					Not Qualified											0 ns
SN65LVDS152DAG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	32	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644-A; TIA-644-A	60 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP32,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G32	2	1.2 mm		6.2 mm	Not Qualified			1			e4	30	260	11 mm		5.5 ns
UA9637ACPE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	20 Amp	TRUE	2		NO	e4			9.81 mm		25 ns
SN75C189NE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	6 V	4		BIPOLAR			EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified			4	RESPONSE CONTROL	NO	e4			19.305 mm		6000 ns
SN75107BDRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	4.25 V	+-5	-5 V	SMALL OUTLINE	SOP14,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e4	30	260	8.65 mm		25 ns
SN65MLVD048RGZT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		6 ns	EIA-899; TIA-899	94 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm		7 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	7 mm		6 ns
SN65LVDS86AQDGG	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	48	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	125 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm		6.1 mm	Not Qualified		TRUE	3		NO	e4	30	260	12.5 mm		7 ns
SN65175N-00	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		TRUE	2						19.305 mm		35 ns
AM26C32CDBRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4		BICMOS			V.10; V.11; EIA-422-B; EIA-423-B		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH					4.5 V	.65 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified			1		NO	e4	30	260	6.2 mm		27 ns
LMH0041SQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE		UNSPECIFIED	YES	2.6 V	1						127 mA	STANDARD	2.5 V	3.5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.1 V			2.4 V	.5 mm	85 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm		7 mm	Not Qualified			6		NO	e3	30	260	7 mm		0 ns
DS26F32MWR-QML	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4		BIPOLAR	MIL-PRF-38535		EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL	5 V				FLATPACK					4.5 V	1.27 mm	125 Cel			-55 Cel			DUAL	R-GDFP-F16		2.032 mm		6.73 mm	Not Qualified			4	LG_MAX	NO				10.16 mm		31 ns
DS90LV012ATLD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE		UNSPECIFIED	YES	3.6 V	1		CMOS			EIA-644-A; TIA-644-A	9 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-XDSO-N8	1	.8 mm		3 mm	Not Qualified	2 Amp		1			e0		235	3 mm		3.5 ns
SN75154J-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	1		BIPOLAR			EIA-232-C	35 mA	SCHMITT TRIGGER	5 V	13.2 V			IN-LINE		10.8 V			4.5 V	2.54 mm	70 Cel	12 V	TOTEM-POLE	0 Cel			DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified		INVERTED	4						19.56 mm
AM26C32MWB	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4		BICMOS	38535Q/M;38534H;883B		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		FLATPACK	FL16,.3	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		2.03 mm		6.73 mm	Not Qualified	6 Amp	TRUE	4		NO	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm		27 ns
SN75175D-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified		TRUE	2						9.9 mm		35 ns
UA9637AMJG	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	1		BIPOLAR			EIA-422-A; EIA-423-A; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDIP-T8		5.08 mm		7.62 mm	Not Qualified	20 Amp	TRUE	2				NOT SPECIFIED	NOT SPECIFIED	9.6 mm		25 ns
SN65LBC173NE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4		BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485; V.10; V.11	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified	16 Amp		1		NO	e4			19.305 mm		30 ns
5962R7802005VEA	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	100k Rad(Si)	CERAMIC, GLASS-SEALED	NO	5.5 V	4		BIPOLAR	MIL-PRF-38535 Class V		EIA-422; EIA-423; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL	5 V	5.5 V			IN-LINE		4.5 V			4.5 V	2.54 mm	125 Cel	5 V		-55 Cel		TIN LEAD	DUAL	R-GDIP-T16	1	5.08 mm		7.62 mm	Qualified			4	LG_MAX; SEATED HGT-NOM	NO	e0			19.94 mm		31 ns
SN75157PSE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR			V.10; V.11; EIA-422-B; EIA-423-B		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm		5.3 mm	Not Qualified			1			e4	30	260	6.2 mm		25 ns
DS90C032E-QML	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	HQCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		CMOS	MIL-PRF-38535 Class Q		IEEE P1596.3	11 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		CHIP CARRIER, HEAT SINK/SLUG	LCC20,.35SQ	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	4		QUAD	S-CQCC-N20	1	1.905 mm		8.89 mm	Not Qualified	2 Amp	TRUE	4		NO				8.89 mm		8 ns
SN65LBC175D	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BICMOS			V.11; EIA-422-A; EIA-423-A; EIA-485	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	20000 Amp	TRUE	4		NO	e4	30	260	9.9 mm		30 ns
SN75154NS	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4		BIPOLAR			EIA-232-E; V.28		SCHMITT TRIGGER	5 V	13.2 V			SMALL OUTLINE		10.8 V			4.5 V	1.27 mm	70 Cel	12 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified			4			e4	30	260	10.2 mm
5962-86888022X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883		EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel			QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified			4	RESPONSE CONTROL					8.89 mm		85 ns
THS6072CD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	16.5 V	2	2	BIPOLAR			GENERAL PURPOSE	5 mA	DIFFERENTIAL	15 V	16 V	+-5/+-15	-15 V	SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	15 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	.085 A	3.9 mm	Not Qualified			2	ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e4	30	260	4.9 mm		0 ns
SN65LVDS1212DB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES		1					GENERAL PURPOSE		DIFFERENTIAL					SMALL OUTLINE, SHRINK PITCH						.65 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G28		2 mm		5.3 mm	Not Qualified			1						10.2 mm		0 ns
SN75173DG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485-A; TIA-485-A	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	16 Amp	TRUE	4		NO	e4	30	260	9.9 mm		35 ns
SN65LVDT386DGGRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	16		CMOS			EIA-644; TIA-644	70 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G64	2	1.2 mm		6.1 mm	Not Qualified	8 Amp	TRUE	16		NO	e4	30	260	17 mm		4 ns
SN75LBC173AN	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4		BICMOS			EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified	8 Amp	TRUE	4		NO	e4			19.305 mm		16 ns
DS26C32AMD8	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD		DIE	UNSPECIFIED		UNSPECIFIED	YES	5.5 V	4		CMOS			EIA-422	23 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			UNCASED CHIP		4.5 V			4.5 V		125 Cel	5 V		-55 Cel			UPPER	X-XUUC-N	1							4		NO						35 ns
SN75LVDT390PWG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified	8 Amp		4		NO	e4	NOT SPECIFIED	260	5 mm		4 ns
DS90C185SQE/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE		PLASTIC/EPOXY	YES		5				93.96 ns		85 mA		1.8 V	1.89 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	1.71 V	Line Driver or Receivers			.4 mm	70 Cel	1.8 V	DIFFERENTIAL	-10 Cel		MATTE TIN	QUAD	S-PQCC-N48	1	.8 mm		6 mm	Not Qualified		COMPLEMENTARY	5		YES	e3	30	260	6 mm		0 ns
MC1489AN-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO		1		BIPOLAR			EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				IN-LINE						2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.305 mm		85 ns
SN65LVDT348DRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		BICMOS			EIA-644-A; TIA-644-A	20 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	4 Amp		4		NO	e4	30	260	9.9 mm		6 ns
5962-9690301QDA	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	2		BIPOLAR	MIL-STD-883 Class Q		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.5 V	+-5	-5 V	FLATPACK	FL14,.3	4.5 V	Line Driver or Receivers	75 Amp	4.5 V	1.27 mm	125 Cel	5 V		-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F14		2.03 mm		6.29 mm	Qualified	16 Amp		2	ADDITIONAL COMMON STROBE INPUT	NO	e0	NOT SPECIFIED	NOT SPECIFIED	9.21 mm		25 ns
5962-9583401VFX	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4		CMOS	MIL-PRF-38535 Class V		IEEE P1596.3		DIFFERENTIAL	5 V	5.5 V			FLATPACK		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel			DUAL	R-GDFP-F16		2.032 mm		6.35 mm	Qualified			4								8 ns
5962-88745012X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		BIPOLAR	MIL-STD-883		GENERAL PURPOSE		DIFFERENTIAL	5 V	5.25 V			CHIP CARRIER		4.75 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel			QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified			2	CONFIGURABLE TOTEM-POLE OUTPUTS					8.89 mm		50 ns
5962-9076601M2A	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883		EIA-422-A; EIA-423-A; EIA-485	75 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel			QUAD	S-CQCC-N20	1	1.91 mm		8.89 mm	Qualified			4		NO				8.89 mm		30 ns
SN65173D	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485-A; TIA-485-A	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified	16 Amp	TRUE	4		NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm		35 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.