LINE RECEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Maximum Receive Delay
SN75140PE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	BIPOLAR		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V		5	IN-LINE	DIP8,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	16 Amp	INVERTED	2		NO	e4			9.81 mm	35 ns
DS90UB926QSQE	Texas Instruments	LINE RECEIVER
DS9639ACN	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		EIA-232-C; EIA-422; EIA-423; MIL-STD-188-114	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	IN-LINE	DIP8,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	20 Amp	TRUE	2			e0			9.817 mm	85 ns
SN75124N-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		IBM 360	100 mA	SCHMITT TRIGGER	5 V			IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	3						19.305 mm	30 ns
SN65LVDS96DGG	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS		EIA-644; TIA-644	82 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified	.02 Amp	TRUE	3		NO	e4	30	260	12.5 mm	0 ns
AM26C32IN-00	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BICMOS		V.11; EIA-422-A; EIA-423-A		DIFFERENTIAL SCHMITT TRIGGER	5 V			IN-LINE					4.5 V	2.54 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	4						19.305 mm	30 ns
5962-9762201VFA	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	3.6 V	4		MIL-PRF-38535 Class V	EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V		FLATPACK		3 V		.00001 Amp	3 V	1.27 mm	125 Cel	3.3 V	TOTEM-POLE	-55 Cel		TIN LEAD	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Qualified	8 Amp	TRUE	4		NO	e0			10.16 mm	6.1 ns
SN65LVDS386DGGRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	16	CMOS		EIA-644; TIA-644	70 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V		-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G64	2	1.2 mm	6.1 mm	Not Qualified	8 Amp	TRUE	16		NO	e4	30	260	17 mm	4 ns
5962-9076603QFA	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.25 V	4	BICMOS	MIL-PRF-38535 Class Q	V.11; EIA-422-A; EIA-423-A; EIA-485	11 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	FLATPACK	FL16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Qualified	16 Amp	TRUE	4		NO	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm	35 ns
AM26C32QDREP	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.5 V	1.27 mm	125 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified			4		NO	e4			9.9 mm	27 ns
SN65LBC173ANR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BICMOS		EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel			-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	8 Amp		4			e4			19.305 mm	16 ns
LMH0341SQX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	6			GENERAL PURPOSE		STANDARD	2.5 V	3.465 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified			6		NO	e0	30	235	7 mm
DS90UB904QSQ	Texas Instruments	LINE RECEIVER		NO LEAD	48		SQUARE	UNSPECIFIED	YES											CHIP CARRIER													QUAD	S-XQCC-N48				Not Qualified
SN75173DRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485-A; TIA-485-A	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	4		NO	e4	30	260	9.9 mm	35 ns
LMH0071SQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	2.625 V	1			GENERAL PURPOSE	127 mA	DIFFERENTIAL	2.5 V	3.465 V		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm			COMPLEMENTARY	5		YES	e3	30	260	7 mm	0 ns
DS90C124QVS	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		AEC-Q100	GENERAL PURPOSE		DIFFERENTIAL	3.3 V			FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel		TIN LEAD	QUAD	S-PQFP-G48	1	1.2 mm	7 mm				24		NO	e0	30	235	7 mm
5962-8864901FA	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2	BIPOLAR	MIL-PRF-38535	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V			FLATPACK					4.5 V		125 Cel			-55 Cel		TIN LEAD	DUAL	R-GDFP-F16				Not Qualified			4		NO	e0				35 ns
SN65LVDS3486BDR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	TRUE	4		NO	e4	30	260	9.9 mm	6 ns
DS26F32MWG/883	Texas Instruments	LINE RECEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	BIPOLAR	MIL-STD-883	EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL	5 V			SMALL OUTLINE					4.5 V	1.27 mm	125 Cel			-55 Cel			DUAL	R-CDSO-G16		2.33 mm	6.35 mm	Not Qualified			4	LG_MAX	NO				9.91 mm	31 ns
DS90CF384AMTD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		EIA-644; TIA-644		DIFFERENTIAL	3.3 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G56	2	1.1 mm	6.1 mm	Not Qualified			28		NO	e0	20	235	14 mm	0 ns
SN75C189D-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	1	BIPOLAR		EIA-232-D	.7 mA	SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					8.65 mm	6000 ns
SN65LVDS348DR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-644-A; TIA-644-A	20 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	4 Amp		4		NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	6 ns
SN65LBC173AN	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BICMOS		EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers		4.75 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	.1 Amp	TRUE	4			e4			19.305 mm	16 ns
SN65LVDS3486DG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm	3 ns
SN75127N-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BIPOLAR		IBM 360/370	47 mA	STANDARD	5 V			IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		INVERTED	7						19.305 mm	30 ns
SN65C189ADB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	1	BIMOS		EIA-232-D	.7 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		TOTEM-POLE	-40 Cel			DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL			NOT SPECIFIED	NOT SPECIFIED	6.2 mm	6000 ns
5962-9076603QEX	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	4	BICMOS	MIL-PRF-38535 Class Q	V.11; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V		IN-LINE		4.75 V			4.75 V	2.54 mm	125 Cel	5 V		-55 Cel		TIN LEAD	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Qualified			4			e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	35 ns
DS90UR916QSQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1		AEC-Q100		110 mA			1.89 V	1.8,1.8/3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N60	3	.8 mm	9 mm	Not Qualified			1		YES	e3	30	260	9 mm	0 ns
DS26LS33ACM	Texas Instruments	LINE RECEIVER		GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4			EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE						1.27 mm							DUAL	R-PDSO-G16		1.753 mm	3.899 mm				4						9.902 mm	35 ns
SN75C189AD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4	BIPOLAR		EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V	6 V	5	SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.0083 Amp	4.5 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4	NOT SPECIFIED	260	8.65 mm	6000 ns
SN65LVDS96DGGG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS		EIA-644; TIA-644	82 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified	.02 Amp	TRUE	3		NO	e4	30	260	12.5 mm	0 ns
5962-9164001M2X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	CMOS	MIL-STD-883	EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V		CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel			QUAD	S-CQCC-N20		1.905 mm	8.89 mm	Qualified			4						8.89 mm	35 ns
SN65C189AD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	1	BIPOLAR		EIA-232-E; V.28	.7 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel			DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL			NOT SPECIFIED	NOT SPECIFIED	8.65 mm	6000 ns
SN75127J-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1	BIPOLAR		IBM 360/370	47 mA	STANDARD	5 V			IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		INVERTED	7						19.56 mm	30 ns
DS96173CN	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4			EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V			IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm				4						19.305 mm	25 ns
5962-8688802DX	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4	BIPOLAR	MIL-STD-883	EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V	5.5 V		FLATPACK		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel		TIN LEAD	DUAL	R-GDFP-F14		2.03 mm	6.285 mm	Qualified			4	RESPONSE CONTROL		e0	NOT SPECIFIED	NOT SPECIFIED	9.21 mm	85 ns
DS90C124IVSX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100	GENERAL PURPOSE		DIFFERENTIAL	3.3 V			FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel		TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			24		NO	e0			7 mm
SN65LVDT32BDR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V		-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		4		NO	e4	30	260	9.9 mm	6 ns
SN65LVDS348DG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS		EIA-644-A; TIA-644-A	20 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V		-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	TRUE	4		NO	e4	30	260	9.9 mm	6 ns
DS10BR254TSQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		6						3.3 V	3.6 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	3 V	Line Driver or Receivers	.00001 Amp		.5 mm	85 Cel	3.3 V		-40 Cel	4	MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm	6 mm	Not Qualified		TRUE	2		NO	e3	30	260	6 mm	0 ns
SN75140D	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BIPOLAR		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V		5	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified	16 Amp		2		NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm	35 ns
SN75ALS193DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		V.10; V.11; EIA-422-B; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.0004 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	4		NO	e4	30	260	9.9 mm	22 ns
DS96175CN/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		4	BIPOLAR		EIA-422-A; EIA-423-A; EIA-485	75 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel		MATTE TIN	DUAL	R-PDIP-T16	1	5.08 mm	7.62 mm	Not Qualified	16 Amp		4			e3			19.304 mm	25 ns
SN65LVDS048DR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4			EIA-644; TIA-644		DIFFERENTIAL	3.3 V			SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified			4		NO				9.9 mm	3.7 ns
SN65C189D	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	1	BIPOLAR		EIA-232-E; V.28	.7 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel			DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL			NOT SPECIFIED	NOT SPECIFIED	8.65 mm	6000 ns
AM26LS33ACNS	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4			V.10; V.11; EIA-422-B; EIA-423-B		DIFFERENTIAL SCHMITT TRIGGER	5 V			IN-LINE					4.75 V		70 Cel			0 Cel			DUAL	R-PDIP-T16				Not Qualified			4							35 ns
SN65LVDT388ADBTG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	38	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	8	CMOS		EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G38	2	1.2 mm	4.4 mm	Not Qualified	8 Amp	TRUE	8		NO	e4	NOT SPECIFIED	260	9.7 mm	4 ns
5962-9762201QFX	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	3.6 V	4		MIL-PRF-38535 Class Q	EIA-644; TIA-644		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V		FLATPACK		3 V			3 V	1.27 mm	125 Cel	3.3 V		-55 Cel		TIN LEAD	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Qualified			4			e0	NOT SPECIFIED	NOT SPECIFIED	10.2 mm	6.1 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.