LINE RECEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75175NSRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V		0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified	16 Amp		4		NO	e4	NOT SPECIFIED	260	10.2 mm		35 ns
5962-9076604QFX	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.25 V	4		BICMOS	MIL-PRF-38535 Class Q		V.11; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V			FLATPACK		4.75 V			4.75 V	1.27 mm	125 Cel	5 V		-55 Cel		TIN LEAD	DUAL	R-GDFP-F16		2.03 mm		6.73 mm	Qualified			4			e0	NOT SPECIFIED	NOT SPECIFIED	10.2 mm		35 ns
DS90UB934TRGZTQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	2			AEC-Q100		ISO 10605		DIFFERENTIAL	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N48	3	1 mm		7 mm				2		NO	e4	30	260	7 mm
DS90CF366MTD/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		-10 Cel		MATTE TIN	DUAL	R-PDSO-G48	2	1.1 mm		6.1 mm	Not Qualified		TRUE	3		NO	e3	30	260	12.5 mm		0 ns
MC1489AD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BIPOLAR			EIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14					Not Qualified	10 Amp	INVERTED	1	RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED			85 ns
DS90UB902QSQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1			AEC-Q100			96 mA			1.89 V	1.8,1.8/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.24SQ,20	1.71 V	Line Driver or Receivers			.5 mm	105 Cel	1.8 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQCC-N40	3	.8 mm		6 mm	Not Qualified		TRUE	1		YES	e3	30	260	6 mm		0 ns
AM26LS33ACDRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm	2.7 V	35 ns
SN65C189ADB-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	1		BIPOLAR			EIA-232-D	.7 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH					4.5 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					6.2 mm		6000 ns
UA9637ACJG	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	2		BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel			0 Cel			DUAL	R-GDIP-T8		5.08 mm		7.62 mm	Not Qualified	20 Amp		2		NO		NOT SPECIFIED	NOT SPECIFIED	9.58 mm		25 ns
MC1489ANSLE-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1		BIPOLAR			EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					10.2 mm		85 ns
LMH0341SQE	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	2.625 V	6					GENERAL PURPOSE		STANDARD	2.5 V	3.465 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3.135 V			2.375 V	.5 mm	85 Cel	3.3 V		-40 Cel		TIN LEAD	QUAD	S-PQCC-N48	2	.8 mm		7 mm	Not Qualified			6		NO	e0	30	235	7 mm
5962-9690301QCX	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2		BIPOLAR	MIL-PRF-38535 Class Q		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V		-5 V	IN-LINE		4.75 V			4.5 V	2.54 mm	125 Cel	5 V		-55 Cel		TIN LEAD	DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Qualified			2	ADDITIONAL COMMON STROBE INPUT		e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm		25 ns
SN75LBC175NE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BICMOS			V.11; EIA-422-A; EIA-423-A; EIA-485	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified	16 Amp		2		NO	e4			19.305 mm		30 ns
SN65LVDS2DG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		TTL		3.1 ns	EIA-644-A; TIA-644-A	8 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	2.4 V	1.27 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp		1		NO	e4	30	260	4.9 mm	.2 V	3.6 ns
SN75C189NSRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4		BIPOLAR			EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified			4	RESPONSE CONTROL	NO	e4	30	260	10.2 mm		6000 ns
SN75107AN-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT					19.305 mm		25 ns
5962-9164001Q2X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BICMOS	MIL-PRF-38535 Class Q		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			CHIP CARRIER		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel			QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Qualified			4						8.89 mm		27 ns
SN65175N	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-B; EIA-423-B; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified	16 Amp	TRUE	2						19.305 mm		35 ns
DS90UB964TRGCRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.89 V	4			AEC-Q100		ISO 10605		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.89 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.71 V			1.71 V	.5 mm	105 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm		9 mm				4	ALSO HAS SUPPLY RANGING FROM 1.045 TO 1.155V	NO	e4	30	260	9 mm
SN75124J-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1		BIPOLAR			IBM 360	100 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified		TRUE	3						19.56 mm		30 ns
SN74LS2323DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		TTL			GENERAL PURPOSE		GATED	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.001 Amp	4.5 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	24 Amp	TRUE	1		NO	e4	30	260	4.9 mm		35 ns
SN75157PSRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.3		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm		5.3 mm	Not Qualified	20 Amp		2		NO	e4	30	260	6.2 mm		25 ns
5962-9762201QEX	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	3.6 V	4			MIL-PRF-38535 Class Q		EIA-644; TIA-644		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			IN-LINE		3 V			3 V	2.54 mm	125 Cel	3.3 V		-55 Cel		TIN LEAD	DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Qualified			4			e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm		6.1 ns
5962-9690301QDX	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2		BIPOLAR	MIL-PRF-38535 Class Q		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V		-5 V	FLATPACK		4.75 V			4.5 V	1.27 mm	125 Cel	5 V		-55 Cel		TIN LEAD	DUAL	R-GDFP-F14		2.03 mm		6.29 mm	Qualified			2	ADDITIONAL COMMON STROBE INPUT		e0	NOT SPECIFIED	NOT SPECIFIED	9.21 mm		25 ns
SN65LVDS32DG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4					EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm		3 ns
AM26C32MFK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		3-STATE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm		8.89 mm	Not Qualified	6 Amp	TRUE	4		NO				8.89 mm		27 ns
SN65LVDS9637BDG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BICMOS			EIA-644; TIA-644	12 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V		-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	4 Amp	TRUE	2		NO	e4	30	260	4.9 mm		6 ns
DS90CR288ASLC	Texas Instruments	LINE RECEIVER	COMMERCIAL	BALL	64	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V				GRID ARRAY, LOW PROFILE, FINE PITCH					3 V	.8 mm	70 Cel			-10 Cel		TIN LEAD	BOTTOM	S-PBGA-B64	3	1.5 mm		8 mm	Not Qualified			4		YES	e0			8 mm		3.5 ns
SN75107AJ-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1		BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT					19.56 mm		25 ns
MC3450J-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1		BIPOLAR			GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified		TRUE	4						19.56 mm		25 ns
DS90CF388AVJD/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	9		CMOS			EIA-644; TIA-644	300 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	-10 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G100	3	1.2 mm		14 mm	Not Qualified		COMPLEMENTARY	9		YES	e4	30	260	14 mm	2.7 V	0 ns
SN65LVDT388DBTR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	38	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	8		CMOS			EIA-644; TIA-644	70 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	2	1.2 mm		4.4 mm	Not Qualified	8 Amp	TRUE	8		NO	e4	30	260	9.7 mm		4 ns
AM26C32CN-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		BICMOS			V.11; EIA-422-A; EIA-423-A		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		TRUE	4						19.305 mm		30 ns
DS90C124QVS/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			AEC-Q100		GENERAL PURPOSE	85 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm		7 mm	Not Qualified		TRUE	1		NO	e3	30	260	7 mm		0 ns
DS89C386TMEA	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	12		CMOS			EIA-422-B; TIA-422-B	69 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP48,.4		Line Driver or Receivers		4.5 V	.635 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G48	1	2.74 mm		7.5 mm	Not Qualified	6 Amp		12			e0	20	235	15.875 mm		30 ns
THS6072CDGN	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	16.5 V	2	2	BIPOLAR			GENERAL PURPOSE	5 mA	DIFFERENTIAL	15 V	16 V	+-5/+-15	-15 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	4.5 V	Line Driver or Receivers		4.5 V	.65 mm	70 Cel	15 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm	.085 A	3 mm	Not Qualified			2	ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e4	30	260	3 mm		0 ns
DS90CF366MTD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS			EIA-644; TIA-644	105 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20		Line Driver or Receivers		3 V	.5 mm	70 Cel			-10 Cel		TIN LEAD	DUAL	R-PDSO-G48	2	1.1 mm		6.1 mm	Not Qualified			3			e0	20	235	12.5 mm		0 ns
DS90CR282MTD	Texas Instruments	LINE RECEIVER		GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4						80 mA	DIFFERENTIAL	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20				4.5 V	.5 mm	70 Cel			-10 Cel			DUAL	R-PDSO-G56		1.1 mm		6.1 mm		2 Amp		4		NO				14 mm	.25 V
AM26C32MWR	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4		BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				FLATPACK					4.5 V	1.27 mm	125 Cel		3-STATE	-55 Cel			DUAL	R-GDFP-F16		2.03 mm		6.73 mm	Not Qualified		TRUE	4		NO				10.16 mm		27 ns
SN75129N	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2		BIPOLAR			IBM 360/370	53 mA	STANDARD	5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T20		5.08 mm		7.62 mm	Not Qualified	16 Amp	INVERTED	4		NO		NOT SPECIFIED	NOT SPECIFIED	25.4 mm		30 ns
SN75124DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3		BIPOLAR			IBM 360	100 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified		TRUE	3		NO				9.9 mm		30 ns
SN75LVDS82DGGR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-644; TIA-644	107 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm		6.1 mm	Not Qualified		TRUE	7		NO	e4	30	260	14 mm		0 ns
5962-9319401M2X	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4			MIL-STD-883	25 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	CHIP CARRIER					4.5 V		125 Cel			-55 Cel			QUAD	S-CQCC-N20								4		NO						25 ns
DS90UH948TNKDRQ1	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	2			AEC-Q100				DIFFERENTIAL SCHMITT TRIGGER	3.3 V	1.26 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.14 V			3 V	.5 mm	105 Cel	1.2 V		-40 Cel		Matte Tin (Sn)	QUAD	S-XQCC-N64	3	.8 mm		9 mm				2	ALSO HAS SUPPLY VOLTAGE FROM 1.14 TO 1.26 V	NO	e3	30	260	9 mm
SN75207BNSE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR					DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm		5.3 mm	Not Qualified			2			e4	30	260	10.2 mm		20 ns
SN75154DG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		BIPOLAR			EIA-232-E; TIA-232-E; V.28	40 mA	SCHMITT TRIGGER	5 V	13.2 V	5/12		SMALL OUTLINE	SOP16,.25	10.8 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	12 V		0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	16 Amp		4	OPTIONAL +12V SUPPLY; RESPONSE CONTROL	NO	e4	NOT SPECIFIED	260	9.9 mm		0 ns
SN75189AN-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1		BIPOLAR			EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				IN-LINE						2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.305 mm		85 ns
AM26C32MJ	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4		BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel			DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified	6 Amp	TRUE	4		NO				19.56 mm		27 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.