LINE RECEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Maximum Receive Delay
SN75ALS173NSR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-B; EIA-423-B; EIA-485	24 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	10.2 mm	27 ns
SN75182J-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	2		BIPOLAR		GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Not Qualified		TRUE	1	BUILT-IN LINE TERMINATION; RESPONSE CONTROL					19.56 mm	45 ns
DS14C89AMX	Texas Instruments	LINE RECEIVER	COMMERCIAL EXTENDED	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES		4		CMOS		EIA-232-E; TIA-232-E; V.28		SCHMITT TRIGGER					SMALL OUTLINE						1.27 mm	75 Cel			0 Cel		TIN LEAD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified			4			e0	20	235	8.65 mm	6500 ns
SN75LVDS390PWG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	5 mm	4 ns
DS90CR486VS	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE		PLASTIC/EPOXY	YES	3.46 V	8		CMOS		EIA-644; TIA-644		DIFFERENTIAL	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ		Line Driver or Receivers		3.14 V	.5 mm	70 Cel			-10 Cel		TIN LEAD	QUAD	S-PQFP-G100	3	1.2 mm		14 mm	Not Qualified			9		NO	e0		260	14 mm	0 ns
SN75125D-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	1		BIPOLAR		IBM 360/370	47 mA	STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified		INVERTED	7						9.9 mm	30 ns
5962-9865201QFX	Texas Instruments	LINE RECEIVER	OTHER	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	3.45 V	4			MIL-PRF-38535 Class Q	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.45 V			FLATPACK		3.15 V			3.15 V		85 Cel	3.3 V		-55 Cel			DUAL	R-GDFP-F16					Qualified			4							3.5 ns
SN75107AD-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT					8.65 mm	25 ns
MC3486N-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		EIA-422-A; EIA-423-A; FED STD 1020; FED STD 1030	85 mA	DIFFERENTIAL	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		TRUE	2						19.305 mm	35 ns
SN65LVDS308ZQCT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	48	VFBGA	SQUARE		PLASTIC/EPOXY	YES	1.95 V	1		CMOS		GENERAL PURPOSE	37 mA	DIFFERENTIAL	1.8 V		1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA48,7X7,20		Line Driver or Receivers		1.65 V	.5 mm	85 Cel			-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B48	3	1 mm		4 mm	Not Qualified			2		NO	e1	30	260	4 mm	0 ns
SN75LVDT388ADBTRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	38	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	8		CMOS		EIA-644; TIA-644	40 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	2	1.2 mm		4.4 mm	Not Qualified	8 Amp	TRUE	8		NO	e4	30	260	9.7 mm	4 ns
SN75107BN-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT					19.305 mm	25 ns
SN75175N3	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified	16 Amp	TRUE	2				NOT SPECIFIED	NOT SPECIFIED	19.305 mm	35 ns
SN65LVDS308ZQCR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	48	VFBGA	SQUARE		PLASTIC/EPOXY	YES	1.95 V	1		CMOS		GENERAL PURPOSE	37 mA	DIFFERENTIAL	1.8 V	1.95 V	1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA48,7X7,20	1.65 V	Line Driver or Receivers	.00002 Amp	1.65 V	.5 mm	85 Cel	1.8 V	DIFFERENTIAL	-40 Cel	2	TIN SILVER COPPER	BOTTOM	S-PBGA-B48	3	1 mm		4 mm	Not Qualified		TRUE	2		NO	e1	30	260	4 mm	0 ns
DS90C032BTMX	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4		CMOS		EIA-644; TIA-644		DIFFERENTIAL	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	2 Amp	TRUE	4			e0	20	235	9.9 mm	6 ns
DS90CR286AQMT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	56	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	1				EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G56	2	1.1 mm		6.1 mm				28		NO	e0			14 mm
SN75140P	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	2		BIPOLAR		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V	5.5 V	5		IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.002 Amp	4.5 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	16 Amp	INVERTED	2		NO	e4			9.81 mm	35 ns
DS90LV028AQDQFTQ1	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	NO LEAD	8	VSON	SQUARE		PLASTIC/EPOXY	YES	3.6 V	2		CMOS	AEC-Q100	EIA-644; TIA-644		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, VERY THIN PROFILE					3 V	.5 mm	125 Cel			-40 Cel		Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)	DUAL	S-PDSO-N8	1	.8 mm		2 mm				2		NO	e4	30	260	2 mm	2.5 ns
SN75C189DRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	6 V	4		BIPOLAR		EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V	6 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.0083 Amp	4.5 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	3.2 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4	NOT SPECIFIED	260	8.65 mm	6000 ns
DS26LS32MW/883	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR		CERAMIC, GLASS-SEALED	YES	5.5 V	4			MIL-STD-883	EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				FLATPACK					4.5 V	1.27 mm	125 Cel			-55 Cel			DUAL	R-GDFP-F16		2.032 mm		6.35 mm	Not Qualified			4	LG-MAX	NO				9.906 mm	120 ns
SN65LVDS390PW	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	5 mm	4 ns
SN65LVDT32AD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified	8 Amp		4		YES		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	6 ns
SN75182N-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	2		BIPOLAR		GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		TRUE	1	BUILT-IN LINE TERMINATION; RESPONSE CONTROL					19.305 mm	45 ns
SN65LVDS048PW	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4				EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16		1.2 mm		4.4 mm	Not Qualified			4		NO				5 mm	3.7 ns
SN75ALS125N	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	7		BIPOLAR		IBM 360/370	25 mA	STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified	16 Amp		7				NOT SPECIFIED	NOT SPECIFIED	19.305 mm	30 ns
MC3486NSE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11		DIFFERENTIAL	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified			4		NO	e4	30	260	10.2 mm	35 ns
5962-9321101MCX	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	15 V	2				GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	10 V				IN-LINE					4.5 V		125 Cel			-55 Cel			DUAL	R-GDIP-T14					Not Qualified			2							150 ns
AM26LS32DMB	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC	NO				TTL			70 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	125 Cel			-55 Cel		TIN LEAD	DUAL	R-XDIP-T16	1				Not Qualified	8 Amp					e0				0 ns
5962-7802005MZA	Texas Instruments	LINE RECEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR		CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4		BIPOLAR	MIL-STD-883	EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	125 Cel			-55 Cel			DUAL	R-CDSO-G16		2.33 mm		6.35 mm	Not Qualified			4	LG_MAX	NO				9.91 mm	31 ns
DS90C032WGLQMLV	Texas Instruments	LINE RECEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	50k Rad(Si)	CERAMIC, GLASS-SEALED	YES	5.5 V	4		CMOS	MIL-PRF-38535 Class V	IEEE P1596.3	11 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V		-55 Cel	4	TIN LEAD	DUAL	R-GDSO-G16	1	2.33 mm		6.35 mm	Not Qualified	2 Amp		4		NO	e0			9.906 mm	8 ns
UA9637ACPSRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.3		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G8		2 mm		5.3 mm	Not Qualified	20 Amp		2		NO		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	25 ns
SN75LVDT388DBTRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	38	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	8				EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	70 Cel			0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	2	1.2 mm		4.4 mm	Not Qualified			8		NO	e4			9.7 mm	4 ns
SN75154DE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.5 V	4		BIPOLAR		EIA-232-E; TIA-232-E; V.28	35 mA	SCHMITT TRIGGER	5 V	13.2 V	5/12		SMALL OUTLINE	SOP16,.25	10.8 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	16 Amp	INVERTED	4	OPTIONAL +12V SUPPLY; RESPONSE CONTROL	NO	e4	30	260	9.9 mm	0 ns
SN65LVDS388DBTR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	38	TSSOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	8		CMOS		EIA-644; TIA-644	70 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	8		DUAL	R-PDSO-G38		1.2 mm		4.4 mm	Not Qualified	8 Amp		8		NO		NOT SPECIFIED	NOT SPECIFIED	9.7 mm	4 ns
SN75189ANSLE-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES		1		BIPOLAR		EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					10.2 mm	85 ns
DS90UB926QSQ/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE		PLASTIC/EPOXY	YES		1			AEC-Q100		145 mA		3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC60,.35SQ,20	3 V	Line Driver or Receivers			.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-PQCC-N60	3	.8 mm		9 mm	Not Qualified			1		NO	e3	30	260	9 mm	0 ns
THS6072CDG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	15 V		+-5/+-15	-15 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified			2	ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e4	30	260	4.9 mm	0 ns
DS90C402MDA	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	DIE	UNSPECIFIED		UNSPECIFIED	YES	5.5 V	2		CMOS		EIA-644; TIA-644		DIFFERENTIAL SCHMITT TRIGGER	5 V				UNCASED CHIP					4.5 V		85 Cel			-40 Cel			UPPER	X-XUUC-N8	1				Not Qualified			2							6 ns
SN75173N-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		TRUE	4						19.305 mm	35 ns
THS6062CDGN	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	HTSSOP	SQUARE		PLASTIC/EPOXY	YES	16 V	2	2	BIPOLAR		GENERAL PURPOSE	10.5 mA	DIFFERENTIAL	15 V	16 V		-15 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		2.5 V			2.5 V	.65 mm	70 Cel	15 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm	.09 A	3 mm	Not Qualified			2	ALSO OPERATES AT 5V TO 32V SINGLE SUPPLY	NO	e4	30	260	3 mm	0 ns
SN65LVDT34DRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	2		BICMOS		EIA-644; TIA-644	12 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V		-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		4.4 mm	Not Qualified	4 Amp	TRUE	2		NO	e4	30	260	4.9 mm	6 ns
MC1489NSLE-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR		PLASTIC/EPOXY	YES		1		BIPOLAR		EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE						1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					10.2 mm	85 ns
SN75ALS173NSLE-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A; EIA-485	24 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDSO-G16		2 mm		5.3 mm	Not Qualified		TRUE	4						10.2 mm	27 ns
DS90UR906QSQE/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	60	HVQCCN	SQUARE		UNSPECIFIED	YES	1.89 V	1			AEC-Q100	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	1.8 V	3.6 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		3 V			1.71 V	.5 mm	105 Cel	3.3 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N60	3	.8 mm		9 mm	Not Qualified			1		NO	e3	30	260	9 mm
SN75C189DBLE	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR		PLASTIC/EPOXY	YES	6 V	4		BIPOLAR		EIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP14,.3		Line Driver or Receivers		4.5 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		2 mm		5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	6000 ns
SN65LVDS310ZQCR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	48	VFBGA	SQUARE		PLASTIC/EPOXY	YES	1.95 V	1		CMOS			25 mA	DIFFERENTIAL	1.8 V	1.95 V	1.8		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA48,7X7,20	1.65 V	Line Driver or Receivers	.00002 Amp	1.65 V	.5 mm	85 Cel	1.8 V		-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B48	3	1 mm		4 mm	Not Qualified	390 Amp	TRUE	27		NO	e1	30	260	4 mm	2.5 ns
SN65LVDS32BDR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		BICMOS		EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V		-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	4 Amp		4		NO	e4	30	260	9.9 mm	6 ns
DS90LV048ATM	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR		PLASTIC/EPOXY	YES	3.6 V	4		CMOS		EIA-644; TIA-644	15 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	2 Amp	TRUE	4		NO	e0	20	235	9.9 mm	2.7 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.