LINE RECEIVER Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Maximum Receive Delay
TB5R2DE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	8 Amp		4		NO	e4	30	250	9.9 mm	5 ns
M38510/10401BDX	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		MIL-PRF-38535 Class B	35 ns			STANDARD	5 V			-5 V	FLATPACK					4.5 V		125 Cel			-55 Cel			DUAL	R-CDFP-F14				Not Qualified					NO					35 ns
TB3R2DE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			GENERAL PURPOSE	34 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	8 Amp		4		YES	e4	30	250	9.9 mm	4 ns
TB3R1LDR	Texas Instruments	LINE RECEIVER																																NICKEL PALLADIUM GOLD			2									e4	30	250
SN55107AJ	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.5 V	+-5	-5 V	IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	75 Amp	4.5 V	2.54 mm	125 Cel	5 V	TOTEM-POLE	-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	25 ns
SNJ55182W	Texas Instruments	LINE RECEIVER	COMMERCIAL	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2	BIPOLAR	MIL-PRF-38535		GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V		5		FLATPACK	FL14,.3		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDFP-F14		2.03 mm	6.285 mm	Not Qualified	16 Amp	TRUE	2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	9.21 mm	45 ns
SN55108BJ	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel		OPEN-COLLECTOR	-55 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	25 ns
TB5R1DE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	85 Cel	5 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	NOT SPECIFIED	250	9.9 mm	5 ns
SN55LBC173MKGD1	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	16	DIE	RECTANGULAR	UNSPECIFIED	YES	5.25 V	4	BICMOS			EIA-422-A; EIA-423-A; EIA-485; CCITT V.11	11 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				UNCASED CHIP					4.75 V		125 Cel		3-STATE	-55 Cel			UPPER	R-XUUC-N16			1.932 mm			TRUE	4		NO		NOT SPECIFIED	NOT SPECIFIED	2.04 mm	35 ns
SNJ55182WR	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2	BIPOLAR	MIL-PRF-38535		GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V				FLATPACK					4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDFP-F14		2.03 mm	6.285 mm	Not Qualified		TRUE	2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO				9.21 mm	45 ns
JM38510/10403	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR	MIL-M-38510 Class B		GENERAL PURPOSE		DIFFERENTIAL	5 V			-5 V	IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel		TIN LEAD	DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified			2	ADDITIONAL COMMON STROBE INPUT	NO	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	25 ns
SCAN921260UJB/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	BALL	196	LBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6	CMOS			IEEE 1149.1	660 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		GRID ARRAY, LOW PROFILE	BGA196,14X14,40	3 V	Line Driver or Receivers		3 V	1 mm	85 Cel	3.3 V		-40 Cel		TIN SILVER COPPER	BOTTOM	S-PBGA-B196	3	1.47 mm	15 mm	Not Qualified		TRUE	6		NO	e1	30	260	15 mm	0 ns
SN55107BW	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	FLATPACK	FL14,.25		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDFP-F14		2.03 mm	6.29 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	9.21 mm	25 ns
SN55ALS195J	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR			V.10; V.11; EIA-422-B; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	2				NOT SPECIFIED	NOT SPECIFIED	19.56 mm	22 ns
SN55182J	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR			GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	45 ns
TB5R2DWE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				GENERAL PURPOSE	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified	8 Amp		4		NO	e4	30	250	10.3 mm	5 ns
78020032A	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	BIPOLAR	MIL-STD-883		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel			-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Qualified	8 Amp		1		NO				8.89 mm	35 ns
SN55157JG	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1	BIPOLAR			EIA-422-A; EIA-423-A; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.75 V	2.54 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDIP-T8		5.08 mm	7.62 mm	Not Qualified	20 Amp	TRUE	2				NOT SPECIFIED	NOT SPECIFIED	9.6 mm	25 ns
DS92LV0422SQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.89 V	1				I2C	100 mA	DIFFERENTIAL	1.8 V	1.89 V	1.8,3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	1.71 V	Line Driver or Receivers		1.71 V	.5 mm	85 Cel	1.8 V		-40 Cel		MATTE TIN	QUAD	S-XQCC-N48	3	.8 mm	7 mm	Not Qualified			24		NO	e3	30	260	7 mm	0 ns
UC5180CQ	Texas Instruments	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	7 V	8	BIPOLAR			EIA232-E; EIA422-A; EIA423-A; V.10; V.11; V.28; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		3 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified	8 Amp		1		NO	e4	30	260	11.505 mm	550 ns
SN55122J	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1	BIPOLAR			GENERAL PURPOSE	100 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	3				NOT SPECIFIED	NOT SPECIFIED	19.56 mm	30 ns
SN55189WR	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4	BIPOLAR			EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V				FLATPACK					4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDFP-F14		2.03 mm	6.285 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL	NO				9.21 mm	85 ns
M38510/10404BFX	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2		MIL-PRF-38535 Class B	60 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V				FLATPACK					4.5 V		125 Cel			-55 Cel			DUAL	R-CDFP-F16				Not Qualified			2		NO					60 ns
DS92LV1224TMSAX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	110 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G28	3	2 mm	5.29 mm	Not Qualified			1			e3	30	260	10.2 mm	0 ns
SN55182FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2	BIPOLAR			GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp	TRUE	2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	45 ns
DS3486MX	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	BIPOLAR			EIA-422; EIA-423	85 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers			1.27 mm	70 Cel			0 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		4			e0	20	235	9.9 mm	35 ns
JM38510/10404BEA	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR	MIL-M-38510 Class B	50 ns	GENERAL PURPOSE		DIFFERENTIAL	5 V	5.5 V			IN-LINE		4.5 V			4.5 V	2.54 mm	125 Cel	5 V		-55 Cel		TIN LEAD	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified			2	OPEN-COLLECTOR OR TOTEM-POLE OUTPUT	NO	e0			19.56 mm	50 ns
SNJ55189FKR	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	BIPOLAR	MIL-PRF-38535		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V				CHIP CARRIER					4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL	NO				8.89 mm	85 ns
DS99R102VS	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	1	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e0			7 mm
N8T14N-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR			GENERAL PURPOSE	100 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	3						19.305 mm	30 ns
M38510/10401BCX	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2			35 ns			STANDARD	5 V	5.5 V		-5 V	FLATPACK		4.5 V			4.5 V		125 Cel	5 V		-55 Cel			DUAL	R-CDFP-F14				Qualified					NO					35 ns
PDSLVDS1002DBVT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	5	LSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				EIA-644-A; TIA-644-A		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE, LOW PROFILE, SHRINK PITCH		3 V			3 V	.95 mm	85 Cel	3.3 V		-40 Cel			DUAL	R-PDSO-G5		1.45 mm	1.6 mm				1		NO				2.9 mm	3.5 ns
TB5R3DR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				GENERAL PURPOSE	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	8 Amp		4		NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	3.5 ns
SN55122FK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	1	BIPOLAR			GENERAL PURPOSE	100 mA	SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.75 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp	TRUE	3				NOT SPECIFIED	NOT SPECIFIED	8.89 mm	30 ns
ADS58C48IPFP	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	80	HTFQFP	RECTANGULAR	PLASTIC/EPOXY	YES	1.9 V	4				GENERAL PURPOSE	330 mA	DIFFERENTIAL	1.8 V	1.9 V			FLATPACK		1.7 V		.00001 Amp	1.7 V	.5 mm	85 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	R-PQFP-G80	3	1.2 mm	12 mm	Not Qualified			4		YES	e4	30	260	12 mm	7.5 ns
DS92LV3242TVSX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES		4					265 mA		3.3 V	3.465 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3.135 V	Line Driver or Receivers			.5 mm	85 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified		TRUE	4		YES	e3	30	260	10 mm	0 ns
SN55108BFK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		OPEN-COLLECTOR	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	25 ns
SN55189W	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4	BIPOLAR			EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		FLATPACK	FL14,.25		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDFP-F14		2.03 mm	6.285 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	9.21 mm	85 ns
ADS58C28IRGCT	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	64	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	1.9 V	2	CMOS			GENERAL PURPOSE	163 mA	DIFFERENTIAL	1.8 V	1.9 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE		1.75 V		.00001 Amp	1.7 V	.5 mm	85 Cel	1.8 V		-40 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N64	3	1 mm	9 mm	Not Qualified		TRUE	2			e4	30	260	9 mm	0 ns
DS1603W/883	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	1	BIPOLAR	MIL-STD-883				DIFFERENTIAL	5 V			-5 V	FLATPACK					4.5 V		125 Cel			-55 Cel			DUAL	R-GDFP-F14							2	PLUS 3V AND -3V INPUT COMMON MODE VOLTAGE						25 ns
DS99R421QSQX/NOPB	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	36	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3		AEC-Q100		ISO 10605	130 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC36,.25SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	105 Cel	3.3 V	3-STATE	-40 Cel		MATTE TIN	QUAD	S-XQCC-N36	3	.8 mm	6 mm	Not Qualified		TRUE	3		NO	e3	30	260	6 mm	0 ns
SN55107BFK	Texas Instruments	LINE RECEIVER	MILITARY	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	2	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	CHIP CARRIER	LCC20,.35SQ		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	8.89 mm	25 ns
DS99R106VSX	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	1	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e0			7 mm
MC3550J	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1	BIPOLAR			GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	125 Cel		3-STATE	-55 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	4				NOT SPECIFIED	NOT SPECIFIED	19.56 mm	25 ns
SN55182WR	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2	BIPOLAR			GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V				FLATPACK					4.5 V	1.27 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDFP-F14		2.03 mm	6.29 mm	Not Qualified		TRUE	2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO				9.21 mm	45 ns
TB3R1DRE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			GENERAL PURPOSE	34 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V		-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	1.75 mm	3.9 mm	Not Qualified	8 Amp		4		YES	e4	NOT SPECIFIED	250	9.9 mm	4 ns
SCAN921226HSM	Texas Instruments	LINE RECEIVER	AUTOMOTIVE	BALL	49	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			IEEE 1149.1	120 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		GRID ARRAY, LOW PROFILE, FINE PITCH	BGA49,7X7,32	3 V	Line Driver or Receivers		3 V	.8 mm	125 Cel	3.3 V	3-STATE	-40 Cel		TIN LEAD	BOTTOM	S-PBGA-B49	3	1.5 mm	7 mm	Not Qualified		TRUE	1		NO	e0	20	235	7 mm	0 ns
SNJ55ALS195W	Texas Instruments	LINE RECEIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	4	BIPOLAR	MIL-PRF-38535		V.10; V.11; EIA-422-B; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		FLATPACK	FL16,.25		Line Driver or Receivers		4.5 V	1.27 mm	125 Cel			-55 Cel			DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified	16 Amp		1				NOT SPECIFIED	NOT SPECIFIED	10.2 mm	22 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.