16 Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
FIN1531MTC	Onsemi	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			2 ns	EIA-644; TIA-644		STANDARD	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.5 V	.65 mm	85 Cel			-40 Cel	4		DUAL	R-PDSO-G16		1.1 mm	4.4 mm						YES				5 mm
HIN202ECBZ-T	Renesas Electronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		10000 ns	EIA-232; V.28		SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	3	2.65 mm	7.5 mm				2		NO	e3	30	260	10.3 mm		10000 ns
LMH0302SQ	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1				GENERAL PURPOSE		DIFFERENTIAL	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.135 V	.65 mm	85 Cel			-40 Cel	1		QUAD	S-XQCC-N16		.8 mm	4 mm	Not Qualified					YES				4 mm
LTC2803CDHC#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	16	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		2000 ns	EIA-232-F; TIA-232-F		SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					1.8 V	.5 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-N16	1	.8 mm	3 mm	Not Qualified			2		NO	e3	30	260	5 mm		400 ns
LTC2804IDHC#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVSON	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		500 ns	EIA-232-F; TIA-232-F		SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					1.8 V	.5 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-N16	1	.8 mm	3 mm	Not Qualified			2		NO	e3	30	260	5 mm		400 ns
LTC486ISW#TRPBF	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	CMOS		50 ns	EIA-422; EIA-485		STANDARD	5 V			SMALL OUTLINE					4.75 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	2.642 mm	7.493 mm	Not Qualified					YES	e3	30	260	10.299 mm
MAX1406CPE	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BICMOS		4000 ns	EIA-232	1 mA	SCHMITT TRIGGER	5 V	26.4 V	5,+-10.8/+-13.2	IN-LINE	DIP16,.3	21.6 V	Line Driver or Receivers		4.5 V	2.54 mm	70 Cel	24 V	TOTEM-POLE	0 Cel	3	TIN LEAD	DUAL	R-PDIP-T16	1	4.572 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	3		NO	e0		245	19.175 mm	19 V	4000 ns
MAX1406CPE+	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BICMOS		4000 ns	EIA-232	1 mA	SCHMITT TRIGGER	5 V	26.4 V	5,+-10.8/+-13.2	IN-LINE	DIP16,.3	21.6 V	Line Driver or Receivers		4.5 V	2.54 mm	70 Cel	24 V	TOTEM-POLE	0 Cel	3	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16	1	4.572 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	3		NO	e3	30	260	19.175 mm	19 V	4000 ns
MAX232AEUE	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS				10 mA		5 V		5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers			.635 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1			Not Qualified	3.2 Amp				NO	e3	30	260		10 V	1000 ns
MAX232AEUE+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS				10 mA		5 V		5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers			.635 mm	85 Cel			-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1			Not Qualified	3.2 Amp				NO	e3	30	260		10 V	1000 ns
MAX232EIN	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2				EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5	IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers		4.5 V	2.54 mm	85 Cel	5 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	10 V	0 ns
MAX3098EACEE-T	Maxim Integrated	LINE RECEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH					3 V	.635 mm	70 Cel			0 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.73 mm	3.9 mm	Not Qualified			3			e0			4.89 mm		85 ns
MAX3098EACEE+T	Analog Devices	LINE RECEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH					3 V	.635 mm	70 Cel			0 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.73 mm	3.9 mm	Not Qualified			3			e3	30	260	4.89 mm		85 ns
MAX3098EAESE	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS			EIA-422; EIA-485	4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		3.3/5	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		3			e0			9.9 mm		85 ns
MAX3098EAESE+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS			EIA-422; EIA-485	4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		3.3/5	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp		3			e3	30	260	9.9 mm		85 ns
MAX9129EUE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		3 ns	GENERAL PURPOSE		STANDARD	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e0			5 mm		0 ns
MAX9129EUE+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		3 ns	GENERAL PURPOSE		STANDARD	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	4	Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified					YES	e3	30	260	5 mm
MC3486DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	85 mA	DIFFERENTIAL	5 V	5.25 V	5	SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	9.9 mm		35 ns
MC3486N-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR			EIA-422-A; EIA-423-A; FED STD 1020; FED STD 1030	85 mA	DIFFERENTIAL	5 V			IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	2						19.305 mm		35 ns
SN65C3221DBR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	1	CAN ALSO OPERATE WITH A 5V SUPPLY	NO	e4	NOT SPECIFIED	260	6.2 mm	10 V	0 ns
SN65C3232DBRE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	BIPOLAR			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		2	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	6.2 mm	10 V	0 ns
SN65C3232DBRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	BIPOLAR			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		2	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	6.2 mm	10 V	0 ns
SN65C3232EDB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			300 ns	EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	2	ALSO OPERATES WITH 5V SUPPLY	NO	e4	30	260	6.2 mm	10 V	300 ns
SN65C3232EDW	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			300 ns	EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE	SOP16,.4	3 V	Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	.001 Amp	INVERTED	2	ALSO OPERATES WITH 5V SUPPLY	NO	e4	NOT SPECIFIED	260	10.3 mm	10 V	300 ns
SN65LBC175AN	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BICMOS			EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers		4.75 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	.1 Amp	TRUE	4		NO	e4			19.305 mm		16 ns
SN65LVDM31DRG4	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		2.9 ns	GENERAL PURPOSE		STANDARD	3.3 V		3.3	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e4	30	260	9.9 mm	.27 V	0 ns
SN65LVDS22PWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			6 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V	3.6 V		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V		.00001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified			2		YES	e4	30	260	5 mm		6 ns
SN65LVDS22PWRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			6 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified			2		YES	e4	30	260	5 mm		6 ns
SN75113NSR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		30 ns	GENERAL PURPOSE		GATED	5 V	5.25 V	5	SMALL OUTLINE	SOP16,.3	4.75 V	Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	.04 Amp	TRUE		1 SINGLE INPUT DRIVER	YES	e4	NOT SPECIFIED	260	10.2 mm	1.6 V	0 ns
SN75LBC173N	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485; V.10; V.11	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	4		NO	e4			19.305 mm		30 ns
SP3232EBCT-L/TR	Exar	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5	SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		3 V	1.27 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	3	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2		NO	e3		260	10.3 mm	10 V	0 ns
ST202EATR	STMicroelectronics	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			2000 ns	EIA-232-E; TIA-232-E; V.28	10 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		4.5 V	.65 mm	125 Cel			-40 Cel	2		DUAL	R-PDSO-G16		1.2 mm	4.4 mm	Not Qualified	3.2 Amp		2		NO				5 mm	10 V	10000 ns
TRS202ECPWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232; TIA-232; V.28	15 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.0002 Amp	4.5 V	.65 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		2		NO	e4	30	260	5 mm	10 V	10000 ns
TRS232D	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	5 V		0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp		2		NO	e4	30	260	9.9 mm	10 V	0 ns
TRS232DR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	5 V		0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp		2		NO	e4	30	260	9.9 mm	10 V	0 ns
TRS3227EIDB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		1	ALSO OPERATES AT 5V	NO	e4	NOT SPECIFIED	260	6.2 mm	10 V	0 ns
ADA4930-1YCPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES		1	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE						.5 mm	105 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	3	1 mm	3 mm	Not Qualified					YES	e3	30	260	3 mm		0 ns
ADM2795EARWZ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			500 ns	EIA-422; EIA-485	130 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE	SOP16,.4			.000001 Amp	1.7 V	1.27 mm	85 Cel			-40 Cel	1	MATTE TIN		R-PDSO-G16	3	2.65 mm	7.5 mm		1 Amp		1		YES	e3	30	260	10.3 mm	2.1 V	200 ns
ADM3202ARW	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		1200 ns	EIA-232-E; TIA-232-E; V.28	10 mA	SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2		NO	e0		240	10.3 mm	5 V	1000 ns
AM26C31QD	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	3 mA	STANDARD	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	20 Amp	COMPLEMENTARY			YES	e4	30	260	9.9 mm	2 V	0 ns
AM26C32IDBLE	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers		4.5 V	.65 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDSO-G16		2 mm	5.3 mm	Not Qualified	6 Amp	TRUE	4		NO		NOT SPECIFIED	NOT SPECIFIED	6.2 mm		27 ns
AM26C32IDBR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			V.10; V.11; EIA-422-B; EIA-423-B		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH					4.5 V	.65 mm	85 Cel			-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified			1		NO	e4	30	260	6.2 mm		27 ns
AM26C32IDE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	6 Amp	TRUE	4		NO	e4	NOT SPECIFIED	260	9.9 mm		27 ns
AM26LS31CN3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR		20 ns				5 V		5	IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T16									YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
AM26LS31MJ/883C	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR	MIL-STD-883 Class C	20 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V			IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified				LG-MAX	YES				21.34 mm
AM26LV32CNS	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-422-B; TIA-422-B; V.11	17 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP16,.3		Line Driver or Receivers		3 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	5 Amp		4		NO	e4	30	260	10.2 mm		20 ns
AM26LV32IDE4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-422-B; TIA-422-B; V.11	17 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	5 Amp	TRUE	4		NO	e4	30	260	9.9 mm		20 ns
DS26C32AMWG/883	Texas Instruments	LINE RECEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	CMOS	MIL-STD-883		EIA-422; EIA-423; FED STD 1020; FED STD 1030	23 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel		TIN LEAD	DUAL	R-CDSO-G16	1	2.33 mm	6.35 mm	Not Qualified	6 Amp	TRUE	4	LG_MAX	YES	e0			9.91 mm		35 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.