16 Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS26LS32MJ/883B	National Semiconductor	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR	MIL-STD-883 Class B		EIA-422; EIA-423; FED STD 1020; FED STD 1030	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel			-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	8 Amp		4			e0			19.43 mm		30 ns
DS90C031TMX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	CMOS		3.5 ns	EIA-644; TIA-644; IEEE 1596.3		STANDARD	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm	.25 V	0 ns
DS90LV047ATM	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		1.7 ns	EIA-644; TIA-644		STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		TRUE			YES	e0	20	235	9.9 mm	.25 V	0 ns
EQCO62X20C1TB-I/3DW	Microchip Technology	LINE TRANSCEIVER		NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1				GENERAL PURPOSE		STANDARD	1.25 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25					.65 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N16		.95 mm	4 mm				1		NO				4 mm
HIN202CBZ-T	Renesas Electronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		10000 ns	V.28; EIA-232-E		SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm				2		NO	e3	30	260	10.3 mm		10000 ns
HIN232CB	Intersil	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS			V.28; EIA-232-E	10 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp		2		NO	e0			10.3 mm	10 V	0 ns
HIN232CBZ	Renesas Electronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS			V.28; EIA-232-E		SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified			2		NO	e3	30	260	10.3 mm
HIN232CBZ-T	Renesas Electronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				V.28; EIA-232-E		SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm				2		NO	e3	30	260	10.3 mm
HIN232ECPZ	Renesas Electronics	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	CMOS		10000 ns	EIA-232; V.28		SCHMITT TRIGGER	5 V			IN-LINE					4.5 V	2.54 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDIP-T16		5.33 mm	7.62 mm				2		NO	e3			19.17 mm		10000 ns
HIN232IPZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2				V.28; EIA-232-E		SCHMITT TRIGGER	5 V			IN-LINE					4.5 V	2.54 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDIP-T16		5.33 mm	7.62 mm				2		NO	e3			19.17 mm
ICL3221IAZ-T	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232; TIA-232; V.24; V.28		SCHMITT TRIGGER	3.15 V			SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	3	2 mm	5.3 mm				1		NO	e3	30	260	6.2 mm
ISO15MDWR	Texas Instruments	LINE TRANSCEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			340 ns	EIA-422; TIA-422; EIA-485; TIA-485	19 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.4	3.15 V	Line Driver or Receivers	.00001 Amp	3.15 V	1.27 mm	125 Cel	3.3 V		-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified			1		YES	e4	30	260	10.3 mm	1.5 V	100 ns
LTC1519CS#PBF	Analog Devices	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	CMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified			4			e3	30	260	9.9 mm		22 ns
LTC2803CGN-1#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	CMOS		2000 ns	EIA-232-F; TIA-232-F		SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, SHRINK PITCH					1.8 V	.635 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.899 mm	Not Qualified			2		NO	e3	30	260	4.8895 mm		400 ns
MAX202EPE	Maxim Integrated	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V		5	IN-LINE	DIP16,.3		Line Driver or Receivers	.0002 Amp	4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	2	TIN LEAD	DUAL	R-PDIP-T16	1	4.572 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e0		245	19.175 mm	10 V	10000 ns
MAX202EPE+	Analog Devices	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	CMOS			EIA-232-E; TIA-232-E; V.28	15 mA	SCHMITT TRIGGER	5 V		5	IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	2	Matte Tin (Sn) - annealed	DUAL	R-PDIP-T16	1	4.572 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e3	30	260	19.175 mm	10 V	10000 ns
MAX202IPWE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-F; TIA-232-F; V.28	15 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		2		NO	e4	30	260	5 mm	10 V	10000 ns
MAX202IPWG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			10000 ns	EIA-232-F; TIA-232-F; V.28	15 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers	.0002 Amp	4.5 V	.65 mm	85 Cel	5 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	.2 Amp	INVERTED	2		NO	e4	30	260	5 mm	10 V	10000 ns
MAX232ECN	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2				EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5	IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers		4.5 V	2.54 mm	70 Cel	5 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	10 V	0 ns
MAX232IDWE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS			EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2	EXTERNAL CHARGE PUMP	NO	e4	30	260	10.3 mm	10 V	0 ns
MAX3097ECEE-T	Maxim Integrated	LINE RECEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH					3 V	.635 mm	70 Cel			0 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.73 mm	3.9 mm	Not Qualified			3			e0			4.89 mm		85 ns
MAX3097ECEE+T	Analog Devices	LINE RECEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH					3 V	.635 mm	70 Cel			0 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.73 mm	3.9 mm	Not Qualified			3			e3	30	260	4.89 mm		85 ns
MAX3098EAEEE	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS			EIA-422; EIA-485	4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		Line Driver or Receivers		3 V	.635 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.73 mm	3.9 mm	Not Qualified	4 Amp		3			e0	20	240	4.89 mm		85 ns
MAX3098EAEEE+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	CMOS			EIA-422; EIA-485	4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		Line Driver or Receivers		3 V	.635 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.73 mm	3.9 mm	Not Qualified	4 Amp		3			e3	30	260	4.89 mm		85 ns
MAX3227EIDBR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS			EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	.001 Amp	TRUE	1		NO	e4	NOT SPECIFIED	260	6.2 mm	10 V	0 ns
MAX9173EUE	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644; IEEE 1596.3	15 mA	DIFFERENTIAL	3.3 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified	4 Amp		4			e0			5 mm		2.7 ns
MAX9173EUE+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644; IEEE 1596.3	15 mA	DIFFERENTIAL	3.3 V		3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3 V	.65 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.1 mm	4.4 mm	Not Qualified	4 Amp		4			e3	30	260	5 mm		2.7 ns
SN65C1167ENSRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			16 ns	EIA-422-B; TIA-422-B; V.11	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	20 Amp		2		YES	e4	30	260	10.2 mm	2 V	27 ns
SN65C1168N	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	BICMOS		12 ns	EIA-422-B; TIA-422-B; V.11	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5	IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	.001 Amp	COMPLEMENTARY	2	RECEIVER 3-STATE OUTPUTS	YES	e4			19.305 mm	2 V	27 ns
SN65C3221DBRE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	.001 Amp	INVERTED	1	CAN ALSO OPERATE WITH A 5V SUPPLY	NO	e4	NOT SPECIFIED	260	6.2 mm	10 V	0 ns
SN65C3232ED	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			300 ns	EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	1.6 Amp	INVERTED	2	ALSO OPERATES WITH 5V SUPPLY	NO	e4	30	260	9.9 mm	10 V	300 ns
SN65LBC170DB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5 V	3	BICMOS		12 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482; X3.277	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	4.75 V	Line Driver or Receivers	.0001 Amp	5 V	.65 mm	85 Cel	5 V	3-STATE	-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	8 Amp	TRUE	3		YES	e4	30	260	6.2 mm	1 V	16 ns
SN65LBC170DBG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3			12 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482; X3.277	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers		4.75 V	.65 mm	85 Cel			-40 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	8 Amp		3		YES	e4	30	260	6.2 mm	1 V	16 ns
SN65LBC173D	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BICMOS			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485; V.10; V.11	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	4		NO	e4	30	260	9.9 mm		30 ns
SN65LVDS048ADR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	2 Amp		4		NO	e4	30	260	9.9 mm		3.7 ns
SN65LVDS048ADRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	2 Amp		4		NO	e4	NOT SPECIFIED	260	9.9 mm		3.7 ns
SN65LVDS048APWRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	15 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V		-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	2 Amp		4		NO	e4	30	260	5 mm		3.7 ns
SN65LVDS105PWR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		3.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	.02 Amp	COMPLEMENTARY	1		YES	e4	30	260	5 mm	2 V	3.5 ns
SN65LVDS33DG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	TRUE	4		NO	e4	30	260	9.9 mm		6 ns
SN65LVDS33DR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	TRUE	4		NO	e4	30	260	9.9 mm		6 ns
SN65LVDS33DRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	BICMOS			EIA-644; TIA-644	23 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	TRUE	4		NO	e4	30	260	9.9 mm		6 ns
SN65LVDS33MDREP	Texas Instruments	LINE RECEIVER	MILITARY	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS			EIA-644; TIA-644	25 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3	SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.000012 Amp	3 V	1.27 mm	125 Cel	3.3 V	TOTEM-POLE	-55 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	4 Amp	TRUE	4		NO	e4	30	260	9.9 mm		8 ns
SN75113NSRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		30 ns	GENERAL PURPOSE		GATED	5 V		5	SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified				1 SINGLE INPUT DRIVER	YES	e4	30	260	10.2 mm	1.6 V	0 ns
SN75113NSRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		30 ns	GENERAL PURPOSE		GATED	5 V		5	SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified				1 SINGLE INPUT DRIVER	YES	e4	30	260	10.2 mm	1.6 V	0 ns
SN75115DE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		75 ns	GENERAL PURPOSE	50 mA	DIFFERENTIAL	5 V	5.25 V	5	SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V		0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	15 Amp	INVERTED	2	OPEN-COLLECTOR OR TOTEM-POLE OUTPUT		e4	NOT SPECIFIED	260	9.9 mm		75 ns
SN75115DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		75 ns	GENERAL PURPOSE	50 mA	DIFFERENTIAL	5 V	5.25 V	5	SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V		0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	15 Amp	INVERTED	2	OPEN-COLLECTOR OR TOTEM-POLE OUTPUT		e4	NOT SPECIFIED	260	9.9 mm		75 ns
SN75ALS192NSR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		14 ns	EIA-422-B; TIA-422-B; V.11	45 mA	STANDARD	5 V	5.25 V	5	SMALL OUTLINE	SOP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	2 Amp				YES	e4	30	260	10.2 mm	2 V	0 ns
SN75ALS199N	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR			V.10; V.11; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5	IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	2		NO	e4			19.305 mm		22 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.