16 Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
EQCO62X20C1-I/3DW	Microchip Technology	LINE TRANSCEIVER		NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1					GENERAL PURPOSE		STANDARD	1.25 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25					.65 mm	85 Cel			-40 Cel	1		QUAD	S-PQCC-N16		.95 mm	4 mm				1		NO				4 mm
EQCO62X20C1-I/8EX	Microchip Technology	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	QCCN	SQUARE	UNSPECIFIED	YES		1							STANDARD	1.25 V			CHIP CARRIER							85 Cel			-40 Cel	1		QUAD	S-XQCC-N16						TRUE	1
EQCO62X20C1T-I/8EX	Microchip Technology	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	QCCN	SQUARE	UNSPECIFIED	YES		1							STANDARD	1.25 V			CHIP CARRIER							85 Cel			-40 Cel	1		QUAD	S-XQCC-N16						TRUE	1
HI-8596PCT	Holt Integrated Circuits	LINE DRIVER	MILITARY	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.45 V	1		CMOS			ARINC 429		STANDARD	3.3 V		3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers	.0000001 Amp	3.15 V	.65 mm	125 Cel		3-STATE	-55 Cel	1	Tin/Lead (Sn/Pb)	QUAD	S-PQCC-N16	3	1 mm	4 mm	Not Qualified					YES	e0	30	240	4 mm	9 V	0 ns
HI-8596PCTF	Holt Integrated Circuits	LINE DRIVER	MILITARY	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.45 V	1		CMOS			ARINC 429		STANDARD	3.3 V		3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers	.0000001 Amp	3.15 V	.65 mm	125 Cel		3-STATE	-55 Cel	1	MATTE TIN (SN)	QUAD	S-PQCC-N16	3	1 mm	4 mm	Not Qualified					YES	e3	40	260	4 mm	9 V	0 ns
HIN232ACPZ	Renesas Electronics	LINE TRANSCEIVER		THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2				10000 ns	EIA-232-E; V.28	10 mA	SCHMITT TRIGGER	5 V			IN-LINE	DIP16,.3				4.5 V	2.54 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDIP-T16		5.33 mm	7.62 mm		3.2 Amp		2		NO	e3			19.17 mm	10 V	10000 ns
HIN232EIBNZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		10000 ns	EIA-232; V.28		SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	3	1.75 mm	3.9 mm				2		NO	e3	30	260	9.9 mm		10000 ns
HIN232IBZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2					V.28; EIA-232-E		SCHMITT TRIGGER	5 V			SMALL OUTLINE					4.5 V	1.27 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	2	2.65 mm	7.5 mm	Not Qualified			2		NO	e3	30	260	10.3 mm
ICL3221CAZ	Renesas Electronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS			EIA-232; TIA-232; V.24; V.28		SCHMITT TRIGGER	3.15 V			SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	3	2 mm	5.3 mm				1		NO	e3	30	260	6.2 mm
ICL3226EIAZ	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS			EIA-232; TIA-232; V.24; V.28		SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G16	2	2 mm	5.3 mm				1		NO	e3	30	260	6.2 mm
ICL3227CA-T	Intersil	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		CMOS			EIA-232; TIA-232; V.24; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G16		2 mm	5.3 mm	Not Qualified	1.6 Amp		1		NO	e0			6.2 mm	10 V	0 ns
ICL3232ECBZ	Renesas Electronics	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS			EIA-232; TIA-232; V.24; V.28		SCHMITT TRIGGER	3.3 V			SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	3	2.65 mm	7.5 mm				2		NO	e3	30	260	10.3 mm
ICL3232EIV-16Z	Renesas Electronics	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS			EIA-232; TIA-232; V.24; V.28		SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	85 Cel			-40 Cel	2	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm				2		NO	e3	30	260	5 mm
IL3585-3E	Nve	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				38 ns	EIA-485; ISO 8482E		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	5.5 V		SMALL OUTLINE		4.5 V			3 V	1.27 mm	85 Cel	5 V		-40 Cel	1		DUAL	R-PDSO-G16		1.8 mm	3.9 mm				1	ALSO HAS SUPPLY VOLTAGE OF 4.5 TO 5.V	YES		NOT SPECIFIED	NOT SPECIFIED	9.9 mm		38 ns
LMH0001SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.465 V	1					GENERAL PURPOSE	43 mA	DIFFERENTIAL	3.3 V	3.465 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	3.135 V	Line Driver or Receivers		3.135 V	.65 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N16	1	.8 mm	4 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4 mm	.75 V	0 ns
LMH6555SQE/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	1					156 mA		3.3 V	3.63 V	3.3	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,20	2.97 V	Line Driver or Receivers		3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	3	.8 mm	4 mm	Not Qualified		COMPLEMENTARY			YES	e3	30	260	4 mm	2.4 V	0 ns
LT1181AIN#PBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		2		BIPOLAR		1300 ns	EIA-232		SCHMITT TRIGGER	5 V			IN-LINE						2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	2	MATTE TIN	DUAL	R-PDIP-T16	1	3.937 mm	7.62 mm	Not Qualified		INVERTED	2	EXTERNAL CHARGE PUMP	NO	e3	30	260			600 ns
LTC1688IS#TRPBF	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4				12 ns	EIA-422; EIA-485		STANDARD	5 V			SMALL OUTLINE					3 V	1.27 mm	85 Cel			-40 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm
LTC1689CS#PBF	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		CMOS		12 ns	EIA-422; EIA-485		STANDARD	5 V			SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm
LTC1689CS#TRPBF	Analog Devices	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		CMOS		12 ns	EIA-422; EIA-485		STANDARD	5 V			SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3			9.9 mm
MAX13236EETE-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	QCCN	SQUARE	PLASTIC/EPOXY	YES				BICMOS				1 mA				3.3/5	CHIP CARRIER	LCC16,.2SQ,32		Line Driver or Receivers			.8 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-PQCC-N16	1			Not Qualified	.8 Amp				NO	e3	30	260		10 V
MAX13236EETE+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	QCCN	SQUARE	PLASTIC/EPOXY	YES				BICMOS				1 mA				3.3/5	CHIP CARRIER	LCC16,.2SQ,32		Line Driver or Receivers			.8 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQCC-N16	1			Not Qualified	.8 Amp				NO	e3	30	260		10 V
MAX202CDRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2					EIA-232-F; TIA-232-F; V.28	15 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	1.6 Amp		2		NO	e4	30	260	9.9 mm	10 V	10000 ns
MAX202CDWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				10000 ns	EIA-232-F; TIA-232-F; V.28	15 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	70 Cel	5 V		0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	2		NO	e4	30	260	10.3 mm	10 V	10000 ns
MAX202IDWE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2					EIA-232-F; TIA-232-F; V.28	15 mA	SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2		NO	e4	30	260	10.3 mm	10 V	10000 ns
MAX232ECD	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2					EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	5 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	260	9.9 mm	10 V	0 ns
MAX232EC/D	Maxim Integrated	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	16	DIE	RECTANGULAR	UNSPECIFIED	YES	5.5 V	2		CMOS			EIA-232-E; TIA-232-E; V.28	10 mA	SCHMITT TRIGGER	5 V			UNCASED CHIP					4.5 V		70 Cel		TOTEM-POLE	0 Cel	2	TIN LEAD	UPPER	R-XUUC-N16	1			Not Qualified		INVERTED	2	EXTERNAL CHARGE PUMP	NO	e0					10000 ns
MAX232ECDW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2					EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	5 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	260	10.3 mm	10 V	0 ns
MAX232ECDWRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2					EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	5 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	260	10.3 mm	10 V	0 ns
MAX232ECPWRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2					EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V	5.5 V	5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	4.5 V	Line Driver or Receivers		4.5 V	.65 mm	70 Cel	5 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	3.2 Amp	INVERTED	2		NO	e4	NOT SPECIFIED	260	5 mm	10 V	0 ns
MAX3094EESE	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-422; EIA-485	4 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	2.5 Amp		4			e0			9.9 mm		111 ns
MAX3094EESE+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4		CMOS			EIA-422; EIA-485	4 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	2.5 Amp		4			e3	30	260	9.9 mm		111 ns
MAX3095ESE/GG8	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS			EIA-422; EIA-423; EIA-485	3.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE	SOP16,.25				4.75 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm		4 Amp		4		NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm		98 ns
MAX3096CEE+TW	Maxim Integrated		COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES				BICMOS				4 mA		3.3 V		3.3	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		Line Driver or Receivers			.635 mm	70 Cel			0 Cel		MATTE TIN	DUAL	R-PDSO-G16	1			Not Qualified	4 Amp					e3	30	260			0 ns
MAX3096CEE+W	Maxim Integrated		COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES				BICMOS				4 mA		3.3 V		3.3	SMALL OUTLINE, SHRINK PITCH	SSOP16,.25		Line Driver or Receivers			.635 mm	70 Cel			0 Cel		MATTE TIN	DUAL	R-PDSO-G16	1			Not Qualified	4 Amp					e3	30	260			0 ns
MAX3097EEEE-T	Maxim Integrated	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH					3 V	.635 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.73 mm	3.9 mm	Not Qualified			3			e0			4.89 mm		85 ns
MAX3097EEEE+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		CMOS			EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, SHRINK PITCH					3 V	.635 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	DUAL	R-PDSO-G16	1	1.73 mm	3.9 mm	Not Qualified			3			e3	30	260	4.89 mm		85 ns
MAX3221IDBG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS			EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	5.5 V	3.3/5	SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	5 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	.001 Amp		1	ALSO OPERATE WITH 5V SUPPLY	NO	e4	30	260	6.2 mm	10 V	150 ns
MAX3453EETE	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1		BICMOS		18 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.5 V	1.8/3.3,5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	4 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N16	1	.8 mm	3 mm	Not Qualified	2 Amp		1		YES	e0		245	3 mm		22 ns
MAX3453EETE+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1		BICMOS		18 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.5 V	1.8/3.3,5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	4 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16	1	.8 mm	3 mm	Not Qualified	2 Amp		1		YES	e3	30	260	3 mm		22 ns
MAX3453EETE-T	Maxim Integrated	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1		BICMOS		18 ns	GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.5 V	1.8/3.3,5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	4 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N16	1	.8 mm	3 mm	Not Qualified	2 Amp		1		YES	e0		245	3 mm		22 ns
MAX3453EETE+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1		BICMOS		18 ns	GENERAL PURPOSE		DIFFERENTIAL		5.5 V	1.8/3.3,5	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	4 V	Line Driver or Receivers		1.65 V	.5 mm	85 Cel	5 V		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16	1	.8 mm	3 mm	Not Qualified	2 Amp		1		YES	e3	30	260	3 mm		22 ns
MAX9235ETE+T	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	QCCN	SQUARE	PLASTIC/EPOXY	YES								45 mA		3.3 V		3.3	CHIP CARRIER	LCC16,.12SQ,20		Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N16	1			Not Qualified						e3	30	260
MC3487DR2	Motorola	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4				20 ns	EIA-422	85 mA	STANDARD	5 V		5	SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e0			9.9 mm	2 V
MC3487DRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		20 ns	EIA-422-B; TIA-422-B; V.11	85 mA	STANDARD	5 V	5.25 V	5	SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	9.9 mm	2 V	0 ns
SN55LVDS31W	Texas Instruments	LINE DRIVER	MILITARY	FLAT	16	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	3.6 V	4		CMOS		4.5 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3	FLATPACK	FL16,.25	3 V	Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	125 Cel	3.3 V	3-STATE	-55 Cel	4	Tin/Lead (Sn/Pb)	DUAL	R-GDFP-F16		2.03 mm	6.73 mm	Not Qualified		TRUE			YES	e0	NOT SPECIFIED	NOT SPECIFIED	10.16 mm	.247 V	0 ns
SN65C1167ENSG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				16 ns	EIA-422-B; TIA-422-B; V.11	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5	SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	20 Amp		2		YES	e4	30	260	10.2 mm	2 V	27 ns
SN65C3221IPWRG4Q1	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	AEC-Q100		EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	85 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	2	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	1	CAN ALSO OPERATE WITH A 5V SUPPLY	NO	e4	NOT SPECIFIED	260	5 mm	10 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.