8 Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75ALS191P	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR	7 ns	V.11; EIA-422-B	40 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers	.000025 Amp	4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	5 Amp	COMPLEMENTARY			YES	e4			9.81 mm	2 V	0 ns
SN751701PE4	Texas Instruments	LINE TRANSCEIVER	OTHER	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	1		BIPOLAR	480 ns	EIA-232-C; TIA-232-C		SCHMITT TRIGGER	12 V			-12 V	IN-LINE					4.5 V	2.54 mm	85 Cel			-20 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified			1		NO	e4			9.81 mm		240 ns
SN75140PSRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		BIPOLAR		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V		5		SMALL OUTLINE	SOP8,.3		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm		5.3 mm	Not Qualified	16 Amp		2		NO	e4	30	260	6.2 mm		35 ns
SN65LVDT9637BDG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				EIA-644; TIA-644	12 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V		-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.01 Amp		2		NO	e4	30	260	4.9 mm		6 ns
SN65HVD11P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	3.6 V	1		BICMOS	40 ns	EIA-485-A; TIA-485-A; ISO 8482	15.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		IN-LINE	DIP8,.3	3 V	Line Driver or Receivers	.0001 Amp	3 V	2.54 mm	85 Cel		3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	8 Amp	COMPLEMENTARY	1	SIGNALING RATE 10 MBPS	YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	70 ns
DS8921ATM	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			15 ns	EIA-422	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	4.5 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp		1		YES	e0	20	235	4.9 mm	2.5 V	20 ns
SN65ALS1176P	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR	15 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27		DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	85 Cel			-25 Cel	1		DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	8 Amp		1		YES		NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	25 ns
SN65MLVD200DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	4.1 ns	EIA-899; TIA-899	26 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	.48 V	6.7 ns
SN75158JG4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR	25 ns				5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel			0 Cel	2		DUAL	R-XDIP-T8										YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
LMH0002MAX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1				GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3.135 V	1.27 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e0	20	235	4.9 mm	.75 V	0 ns
SN75117JG-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1		BIPOLAR	30 ns	GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-GDIP-T8		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O; STROBED RECEIVER	YES				9.6 mm		75 ns
SN75LVDS9638DGK	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS	6 ns	EIA-644; TIA-644	35 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19	3 V	Line Driver or Receivers	.00002 Amp	3 V	.65 mm	70 Cel	3.3 V	3-STATE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm		3 mm	Not Qualified		TRUE			YES	e4	30	260	3 mm	.247 V	0 ns
DS36277TMX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	60 ns	V.11; EIA-422-A; TIA-422-A; EIA-485; TIA-485	75 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	16 Amp		1	COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e0	20	235	4.9 mm	1.3 V	90 ns
DS91D176TMAX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	5 ns	EIA-899; TIA-899		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp		1		YES	e0	20	235	4.9 mm	.48 V	7.5 ns
SN65LVDT100D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR	.8 ns	EIA-644-A; TIA-644-A	30 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	4.9 mm		.8 ns
SN75157PS	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		V.10; V.11; EIA-422-B; EIA-423-B		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm		5.3 mm	Not Qualified			1			e4	30	260	6.2 mm		25 ns
SN65HVD12PE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	3.6 V	1		BICMOS	300 ns	EIA-485-A; TIA-485-A; ISO 8482	15.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		IN-LINE	DIP8,.3		Line Driver or Receivers	.0001 Amp	3 V	2.54 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	8 Amp		1	SIGNALING RATE 1 MBPS	YES	e4			9.81 mm	1.5 V	70 ns
SN75178BDR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	20 ns	V.11; X.27; EIA-422-A; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified	8 Amp		1	POSITIVE AND NEGATIVE CURRENT LIMITING 3-STATE OUTPUTS	YES		NOT SPECIFIED	NOT SPECIFIED	4.9 mm	1.5 V	40 ns
SN65HVD1787P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1			50 ns	EIA-485; TIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	2.54 mm	105 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4			9.81 mm	1.5 V	70 ns
SN75HVD10D	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS	16 ns	EIA-485-A; TIA-485-A; ISO 8482	15.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	70 Cel	3.3 V	3-STATE	0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	TRUE	1	SIGNALING RATE 32 MBPS	YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	25 ns
SN75140PSLE	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BIPOLAR		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V		5		SMALL OUTLINE	SOP8,.3		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G8		2 mm		5.3 mm	Not Qualified	16 Amp	INVERTED	2				NOT SPECIFIED	NOT SPECIFIED	6.2 mm		35 ns
SN65MLVD204DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	4.1 ns	EIA-899; TIA-899	26 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp		1		YES	e4	30	260	4.9 mm	.48 V	6.7 ns
SN65176BJG	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC	NO		1		BIPOLAR			55 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	85 Cel			-40 Cel	1		DUAL	R-XDIP-T8					Not Qualified	16 Amp		1		YES					1.5 V	35 ns
SN74LS2323DRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		TTL		GENERAL PURPOSE		GATED	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	24 Amp		1		NO	e4	30	260	4.9 mm		35 ns
SN75ALS176ADE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	11.5 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27		DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1	3-STATE DRIVER OUTPUT AND RECEIVER INPUT	YES	e4	30	260	4.9 mm	1.5 V	18 ns
SN75177JG	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR			35 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel			0 Cel	1		DUAL	R-XDIP-T8					Not Qualified	8 Amp				YES		NOT SPECIFIED	NOT SPECIFIED		1.5 V	0 ns
THS6062IDGNRG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	16 V	2	2	BIPOLAR		GENERAL PURPOSE	10.5 mA	DIFFERENTIAL	15 V	16 V		-15 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		2.5 V			2.5 V	.65 mm	85 Cel	15 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm	.09 A	3 mm	Not Qualified		TRUE	2	ALSO OPERATES AT 5V TO 32V SINGLE SUPPLY	NO	e4	30	260	3 mm		0 ns
DS8921ATN	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1			15 ns	EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel			-40 Cel	1		DUAL	R-PDIP-T8		5.08 mm		7.62 mm				1		YES				9.817 mm		20 ns
SN65HVD24DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS	60 ns	EIA-485-A; TIA-485-A	14 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	1.8 V	50 ns
SN75158PSE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2			20 ns	EIA-422-B; V.11		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm		5.3 mm	Not Qualified					YES	e4	30	260	6.2 mm
SN65179BP	Texas Instruments		INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR			70 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	85 Cel			-40 Cel	1		DUAL	R-PDIP-T8					Not Qualified	8 Amp				YES					1.5 V	40 ns
SN75117P3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR			60 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel			0 Cel	1		DUAL	R-PDIP-T8						15 Amp				YES					2 V	75 ns
SN65HVD24D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS	60 ns	EIA-485-A; TIA-485-A	14 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.1 Amp	TRUE	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.8 V	50 ns
SN75076BD	Texas Instruments		COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				BIPOLAR			30 mA		5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp		1.27 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G8					Not Qualified	8 Amp				YES					1.5 V	35 ns
SN65HVD31DR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	65 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	6.4 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	TRUE	1	SIGNALING RATE 5MBPS	YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	70 ns
DS25BR100TSD	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.6 V	1			.465 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-XDSO-N8	3	.8 mm		3 mm	Not Qualified					YES	e0			3 mm
DS91C176TMAX	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	5 ns	EIA-899; TIA-899	29.5 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000015 Amp	3 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp		1		YES	e0	20	235	4.9 mm	.48 V	7.5 ns
SN75155P-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	1		BIPOLAR	150 ns	EIA-232-C	11.9 mA	SCHMITT TRIGGER	12 V			-12 V	IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	1		DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified		INVERTED	1	RESPONSE CONTROL; BUILT IN 5V REGULATOR	NO				9.81 mm		245 ns
SN75157PSLE-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		EIA-422-A; EIA-423-A; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	S-PDSO-G8		2 mm		5.3 mm	Not Qualified		TRUE	2						6.2 mm		25 ns
THS6062CDGNR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	33 V	2	2	BIPOLAR		GENERAL PURPOSE	10.5 mA	DIFFERENTIAL	15 V	16 V		-15 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH		2.5 V			4.5 V	.65 mm	70 Cel	15 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm	.09 A	3 mm	Not Qualified			2	ALSO OPERATES AT 5V TO 32V SINGLE SUPPLY	NO	e4	30	260	3 mm		0 ns
SN75LBC182DG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS	1300 ns	EIA-485-A; TIA-485-A; ISO 8482	25 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel	5 V	DIFFERENTIAL	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	4 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	1.5 V	150 ns
SN65MLVD2DRBR	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1		CMOS		EIA-899; TIA-899	25 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-N8	2	1 mm		3 mm	Not Qualified	8 Amp	TRUE	1		NO	e4	30	260	3 mm	.48 V	6 ns
SN75119DR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BIPOLAR	30 ns	GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	70 Cel		3-STATE	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	2	1.75 mm		3.9 mm	Not Qualified	15 Amp	COMPLEMENTARY	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O	YES	e4	30	260	4.9 mm	2 V	75 ns
SN65LVDM176IDGKR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES		1				EIA-485		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH						.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G8		1.07 mm		3 mm	Not Qualified			1		YES				3 mm
SN75158JG	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR	25 ns				5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel			0 Cel	2		DUAL	R-XDIP-T8					Not Qualified					YES					2 V
SN75157D-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		EIA-422-A; EIA-423-A; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified		TRUE	2						4.9 mm		25 ns
SN75140PSE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				GENERAL PURPOSE		DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm		5.3 mm	Not Qualified			2		NO	e4	30	260	6.2 mm		30 ns
SN75ALS191DRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		TTL	7 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000025 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e4	30	260	4.9 mm	2 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.