8 Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
THS6072CDGNG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	15 V		+-5/+-15	-15 V	SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		4.5 V	.65 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm		3 mm	Not Qualified			2	ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e4	30	260	3 mm		0 ns
SN75150DE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	2		BIPOLAR	.2 ns	EIA-232-E; V.28		STANDARD	12 V		+-12	-12 V	SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	10.8 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e4	30	260	4.9 mm	10 V	0 ns
SN75141D	Texas Instruments		COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				BIPOLAR			35 mA		5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers			1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G8					Not Qualified	16 Amp										35 ns
SN75ALS191PE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR	7 ns	V.11; EIA-422-B	40 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers	.000025 Amp	4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	5 Amp	COMPLEMENTARY			YES	e4			9.81 mm	2 V	0 ns
SN75HVD10DRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS	16 ns	EIA-485-A; TIA-485-A; ISO 8482	15.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.0001 Amp	3 V	1.27 mm	70 Cel	3.3 V	3-STATE	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	TRUE	1	SIGNALING RATE 32 MBPS	YES	e4	30	260	4.9 mm	1.5 V	25 ns
UA9636ACDRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	1		BIPOLAR	140000 ns	EIA-232-E; V.10; V.28; EIA-423-B	18 mA	STANDARD	12 V	13.2 V	+-12	-12 V	SMALL OUTLINE	SOP8,.25	10.8 V	Line Driver or Receivers	.00001 Amp	10.8 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e4	NOT SPECIFIED	260	4.9 mm	8 V	0 ns
DS96177CN	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1		BIPOLAR	25 ns	EIA-422-A; EIA-485	40 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	1	Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	16 Amp	COMPLEMENTARY	1	REPEATER	YES	e0			9.817 mm	1.5 V	25 ns
5962-01-097-7475	Texas Instruments		MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR			35 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers			2.54 mm	125 Cel			-55 Cel			DUAL	R-XDIP-T8					Not Qualified	16 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75158PSLE-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	20 ns	EIA-422-A	50 mA	STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	S-PDSO-G8		2 mm		5.3 mm	Not Qualified		COMPLEMENTARY			YES				6.2 mm		0 ns
DS90C402M	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		EIA-644; TIA-644	11 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel		TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	2 Amp	COMPLEMENTARY	2		NO	e0	20	235	4.9 mm		6 ns
SN75177BJG-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1		BIPOLAR	22 ns	V.11; X.27; EIA-422-A; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-GDIP-T8		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY	1	REPEATER	YES				9.6 mm		40 ns
DS3695AMX	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	22 ns	EIA-422; EIA-485	60 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	16 Amp		1	COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER	YES	e0	20	235	4.9 mm	1.5 V	42 ns
SN65LVDS9637IDGN	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES		2				EIA-422; EIA-485		DIFFERENTIAL	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH						.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G8		1.07 mm		3 mm	Not Qualified			1		YES				3 mm
THS6062CDRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	16 V	2				GENERAL PURPOSE		DIFFERENTIAL	15 V			-15 V	SMALL OUTLINE					2.5 V	1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified			2	ALSO OPERATES AT 5V TO 32V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		0 ns
UA9638CDRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	20 ns	EIA-422-B; TIA-422-B	65 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.000025 Amp	4.75 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	2	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	4.9 mm	2 V	0 ns
SN75140P-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		BIPOLAR		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified		INVERTED	2						9.81 mm		35 ns
SN75150PSLE-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	1		BIPOLAR		EIA-232-C	22 mA	STANDARD	12 V			-12 V	SMALL OUTLINE					10.8 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	S-PDSO-G8		2 mm		5.3 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO				6.2 mm		0 ns
DS10BR150TSD	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.6 V	1			.6 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-XDSO-N8	1	.8 mm		3 mm	Not Qualified			1		YES	e0	40	260	3 mm		.6 ns
SN65LBC176QJG	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1		BICMOS	31 ns	EIA-485; ISO 8482	3.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	125 Cel			-40 Cel	1		DUAL	R-GDIP-T8					Not Qualified	8 Amp		1	COMMON I/O: TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES		NOT SPECIFIED	NOT SPECIFIED		1.1 V	37 ns
SN75276D	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	22 ns	V.11; EIA-422-B; EIA-485-A	70 mA	DIFFERENTIAL	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified	8 Amp		1		YES		NOT SPECIFIED	NOT SPECIFIED	4.9 mm	1.5 V	35 ns
LMH0002TMAX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	1				GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3.135 V	1.27 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e0	20	235	4.9 mm	.75 V	0 ns
THS6042CDDA	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V		-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE		5 V			5 V	1.27 mm	70 Cel	12 V	DIFFERENTIAL	0 Cel	2	Matte Tin (Sn)	DUAL	R-PDSO-G8	1	1.68 mm	.35 A	3.9 mm	Not Qualified		COMPLEMENTARY		ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO	e3	NOT SPECIFIED	260	4.89 mm		0 ns
SN75176BD-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	20 ns	V.11; X.27; EIA-422-A; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				4.9 mm		35 ns
SN65HVD23D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS	20 ns	EIA-485-A; TIA-485-A	11 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.1 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.8 V	35 ns
SN65LVDT101DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BIPOLAR	.9 ns	EIA-644-A; TIA-644-A	61 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	4.9 mm		.9 ns
DS36277TN	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1			60 ns	V.11; EIA-422-A; TIA-422-A; EIA-485; TIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	85 Cel			-40 Cel	1		DUAL	R-PDIP-T8		5.08 mm		7.62 mm				1		YES				9.817 mm		90 ns
SN75ALS176BDR-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	10 ns	V.11; X.27; EIA-422-A; EIA-485	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				4.9 mm		16.5 ns
THS6042IDR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE					5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		0 ns
SN65HVD52DRG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			230 ns	EIA-485-A; TIA-485-A	8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp		1	SIGNALING RATE 1 MBPS	YES	e4	30	260	4.9 mm	1.7 V	60 ns
SN65HVD05D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS	11 ns	EIA-485-A; TIA-485-A; ISO 8482E	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.1 Amp	COMPLEMENTARY	1	SIGNALING RATE UPTO 40 MBPS	YES	e4	NOT SPECIFIED	260	4.9 mm	2.5 V	25 ns
SN75ALS176ADR-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	11.5 ns	V.11; X.27; EIA-422-A; EIA-485	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				4.9 mm		18 ns
SN75140JG4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR			35 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T8						16 Amp										35 ns
SN75HVD05P	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		BICMOS	11 ns	EIA-485-A; TIA-485-A; ISO 8482E	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.000008 Amp	4.5 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	.1 Amp	TRUE	1	SIGNALING RATE UPTO 40 MBPS	YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	2.5 V	25 ns
SN65MLVD204DR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		CMOS	4.1 ns	EIA-899; TIA-899	26 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	.48 V	6.7 ns
SN65LVDT9637AD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		EIA-644; TIA-644	12 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	85 Cel			-40 Cel			DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified	8 Amp		2		YES		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		6 ns
SN75LBC184CD	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1				EIA-485; ISO 8482		DIFFERENTIAL					SMALL OUTLINE						1.27 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified			1		YES				4.9 mm
DS90C401M	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS	3.5 ns	EIA-644; TIA-644	14 mA	STANDARD	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel	5 V	CONSTANT-CURRENT	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES	e0	20	235	4.9 mm	.25 V	0 ns
SN75155PE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	1		BIPOLAR	150 ns	EIA-232-E; TIA-232-E; V.28	14 mA	SCHMITT TRIGGER	12 V		+-12	-12 V	IN-LINE	DIP8,.3		Line Driver or Receivers	.000005 Amp	4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	24 Amp	INVERTED	1	RESPONSE CONTROL; BUILT IN 5V REGULATOR	NO	e4			9.81 mm	6.4 V	245 ns
SN65HVD11QP	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	3.6 V	1		BICMOS	40 ns	EIA-485-A; TIA-485-A; ISO 8482	15.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		IN-LINE	DIP8,.3		Line Driver or Receivers	.0001 Amp	3 V	2.54 mm	125 Cel			-40 Cel	1		DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	8 Amp		1	SIGNALING RATE 10 MBPS	YES		NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	70 ns
SN65LBC184ID	Texas Instruments	LINE TRANSCEIVER		GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				EIA-485; ISO 8482		DIFFERENTIAL	5 V				SMALL OUTLINE					4.75 V	1.27 mm					1		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified			1		YES				4.9 mm
THS6042IDDAR	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V			-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE					5 V	1.27 mm	85 Cel			-40 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 10V TO 30V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
SN75177BDR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			20 ns	V.11; X.27; EIA-422-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified			1	POSITIVE AND NEGATIVE CURRENT LIMITING 3-STATE OUTPUTS	YES				4.9 mm		40 ns
THS6092CDDARG3	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	7 V	2				GENERAL PURPOSE		DIFFERENTIAL	5 V		12	-5 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers		2.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
SN75179BD-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	22 ns	V.11; X.27; EIA-422-A; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	1		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY	1		YES				4.9 mm		40 ns
THS6062ID	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	33 V	2	2	BIPOLAR		GENERAL PURPOSE	10.5 mA	DIFFERENTIAL	15 V	16 V		-15 V	SMALL OUTLINE		2.5 V			4.5 V	1.27 mm	85 Cel	15 V		-40 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	.09 A	3.9 mm	Not Qualified			2	ALSO OPERATES AT 5V TO 32V SINGLE SUPPLY	NO	e4	30	260	4.9 mm		0 ns
V62/03671-02XE	Texas Instruments	LINE TRANSCEIVER	MILITARY	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS	12 ns	EIA-485-A; TIA-485-A; ISO 8482	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	125 Cel	5 V	3-STATE	-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	TRUE	1		YES	e4	30	260	4.9 mm	.9 V	30 ns
SN65HVD96D	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			80 ns	EIA-422; EIA-485	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	2 Amp	COMPLEMENTARY	1		YES	e4	NOT SPECIFIED	260	4.9 mm	1.5 V	90 ns
SN75157PE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	20 Amp	TRUE	2		NO	e4			9.81 mm		25 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.