8 Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75HVD08P	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		BICMOS		40 ns	EIA-485-A; TIA-485-A; ISO 8482E	16 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3.3/5		IN-LINE	DIP8,.3	3 V	Line Driver or Receivers	.0001 Amp	3 V	2.54 mm	70 Cel		3-STATE	0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	.1 Amp	TRUE	1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	70 ns
THVD1550D	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				16 ns	EIA-485-A; TIA-485-A	1 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			SMALL OUTLINE		4.5 V			4.5 V	1.27 mm	125 Cel	5 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.895 mm				1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	4.905 mm		45 ns
SN65LVDT2DG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		TTL		3.1 ns	EIA-644-A; TIA-644-A	8 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	2.5/3.3		SMALL OUTLINE	SOP8,.25	2.4 V	Line Driver or Receivers		2.4 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.02 Amp	TRUE	1		NO	e4	NOT SPECIFIED	260	4.9 mm	2 V	3.6 ns
SN65EL16DGK	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.7 V	1				.3 ns	GENERAL PURPOSE	23 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00015 Amp	4.2 V	.65 mm	85 Cel	5 V	DIFFERENTIAL	-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.1 mm		3 mm	Not Qualified		COMPLEMENTARY	1		YES	e4	30	260	3 mm		.3 ns
P82B96PE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	2		BIPOLAR			GENERAL PURPOSE	2 mA	STANDARD	5 V		2/15		IN-LINE	DIP8,.3		Other Interface ICs		2 V	2.54 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified			2		NO	e4			9.81 mm		0 ns
SN75LVDS9637DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2					EIA-644; TIA-644	10 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		3 V	1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified	8 Amp		2		NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		6 ns
SN75119PP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR				60 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel			0 Cel	1		DUAL	R-PDIP-T8						15 Amp				YES					2 V	75 ns
DS90LV027MX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS		6 ns	EIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e0	20	235	4.9 mm	.25 V	0 ns
UA9638CIDREP	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		CMOS			EIA-422-B; TIA-422-B	65 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.000025 Amp	4.75 V	1.27 mm	85 Cel	5 V	TOTEM-POLE	-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	2	1.75 mm		3.9 mm			COMPLEMENTARY			YES	e4	30	260	4.9 mm	2 V	0 ns
SN65LVDS9637D	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		CMOS			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.01 Amp	TRUE	2		NO	e4	NOT SPECIFIED	260	4.9 mm		3 ns
SN65LBC176JG-00	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1		BICMOS		25 ns	EIA-485; ISO 8482	3.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V		85 Cel		3-STATE	-40 Cel	1		DUAL	R-GDIP-T8					Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES						45 ns
SN75ALS176BD-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		10 ns	V.11; X.27; EIA-422-A; EIA-485	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				4.9 mm		16.5 ns
SN75178BPSR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		20 ns	V.11; X.27; EIA-422-A; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.3		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G8		2 mm		5.3 mm	Not Qualified	8 Amp		1	POSITIVE AND NEGATIVE CURRENT LIMITING 3-STATE OUTPUTS	YES		NOT SPECIFIED	NOT SPECIFIED	6.2 mm	1.5 V	40 ns
SN75HVD07DR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		400 ns	EIA-485-A; TIA-485-A; ISO 8482E	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.1 Amp	TRUE	1	SIGNALING RATE UPTO 1 MBPS	YES	e4	NOT SPECIFIED	260	4.9 mm	2.5 V	70 ns
SN75177BD-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		20 ns	V.11; X.27; EIA-422-A; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY	1	REPEATER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				4.9 mm		40 ns
SN65176BD-00	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR		20 ns	V.11; X.27; EIA-422-A; EIA-485	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	105 Cel		3-STATE	-40 Cel	1		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				4.9 mm		35 ns
UA9637ACPE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	20 Amp	TRUE	2		NO	e4			9.81 mm		25 ns
DS90LV027AHM	Texas Instruments	LINE DRIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				2 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	125 Cel			-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e0	20	235	4.9 mm	.25 V	0 ns
THS6052CDDAG3	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e3	30	260	4.89 mm		0 ns
SN65LBC176QDREP	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BICMOS		31 ns	EIA-485-A; TIA-485-A; ISO 8482		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	125 Cel			-40 Cel	1		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified			1	COMMON I/O: TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		37 ns
SN65HVD51DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				46 ns	EIA-485-A; TIA-485-A	8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp		1	SIGNALING RATE 5 MBPS	YES	e4	30	260	4.9 mm	1.7 V	60 ns
UA9637ACP/BURNIN	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR				50 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T8						20 Amp										25 ns
DS90LV012ATLD	Texas Instruments	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.6 V	1		CMOS			EIA-644-A; TIA-644-A	9 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.11,20		Line Driver or Receivers		2.7 V	.5 mm	85 Cel			-40 Cel		TIN LEAD	DUAL	S-XDSO-N8	1	.8 mm		3 mm	Not Qualified	2 Amp		1			e0		235	3 mm		3.5 ns
UA9637AMJG	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1		BIPOLAR			EIA-422-A; EIA-423-A; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.5 V	2.54 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDIP-T8		5.08 mm		7.62 mm	Not Qualified	20 Amp	TRUE	2				NOT SPECIFIED	NOT SPECIFIED	9.6 mm		25 ns
SN65HVD1787DG4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				50 ns	EIA-485; TIA-485	6 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	105 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp		1		YES	e4	30	260	4.9 mm	1.5 V	70 ns
SN75157PSE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR			V.10; V.11; EIA-422-B; EIA-423-B		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm		5.3 mm	Not Qualified			1			e4	30	260	6.2 mm		25 ns
SN75HVD07P	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		BICMOS		400 ns	EIA-485-A; TIA-485-A; ISO 8482E	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	.1 Amp	TRUE	1	SIGNALING RATE UPTO 1 MBPS	YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	2.5 V	70 ns
SN65LVDS179IDGKR	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES		1					EIA-422; EIA-485		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH						.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G8		1.07 mm		3 mm	Not Qualified			1		YES				3 mm
SN75119D-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BIPOLAR		30 ns	GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; COMMON I/O	YES				4.9 mm		75 ns
THS6072CD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2	2	BIPOLAR			GENERAL PURPOSE	5 mA	DIFFERENTIAL	15 V	16 V	+-5/+-15	-15 V	SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	15 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	.085 A	3.9 mm	Not Qualified			2	ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e4	30	260	4.9 mm		0 ns
V62/06634-01XE	Texas Instruments	LINE TRANSCEIVER	MILITARY	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		BICMOS		23 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	2.1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	125 Cel	3.3 V	3-STATE	-55 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1	SIGNALING RATE 25MBPS	YES	e4	30	260	4.9 mm	1.5 V	60 ns
SN65LVDM179IDGK	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES		1					EIA-485		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH						.65 mm	85 Cel			-40 Cel	1		DUAL	R-PDSO-G8		1.07 mm		3 mm	Not Qualified			1		YES				3 mm
DS25BR101TSDX/NOPB	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				.465 ns		43 mA		3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	85 Cel	3.3 V	DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N8	3	.8 mm		3 mm	Not Qualified	.01 Amp	COMPLEMENTARY	1		YES	e3	30	260	3 mm		0 ns
DS91D176TMA/NOPB	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				5 ns	EIA-899; TIA-899	29.5 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.000015 Amp	3 V	1.27 mm	85 Cel	3.3 V	3-STATE	-40 Cel	1	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	.015 Amp	TRUE	1		YES	e3	30	260	4.9 mm	.48 V	7.5 ns
PTHVD1426DR	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				35 ns	EIA-485-A; TIA-485-A	3 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V				SMALL OUTLINE	SOP8,.25				3 V	1.27 mm	125 Cel		DIFFERENTIAL	-40 Cel	1		DUAL	R-PDSO-G8		1.75 mm		3.895 mm			COMPLEMENTARY	1	ALSO OPERATES AT 5V NOM	YES				4.905 mm	1.5 V	75 ns
5962-01-230-2316	Texas Instruments		MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR	38535Q/M;38534H;883B			50 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers			2.54 mm	125 Cel			-55 Cel			DUAL	R-XDIP-T8					Not Qualified	20 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN65HVD21MDREPR	Texas Instruments	LINE TRANSCEIVER	MILITARY	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				60 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	125 Cel			-55 Cel	1		DUAL	R-PDSO-G8		1.75 mm		3.9 mm				1		YES				4.9 mm		70 ns
SN65ALS176P-00	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		15 ns	V.11; X.27; EIA-422-A; EIA-485	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel	1		DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				9.81 mm		25 ns
DS36C278TMX	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		1		CMOS		80 ns	EIA-422-B; TIA-442-B; EIA-485	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000002 Amp		1.27 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	4 Amp		1		YES	e0	20	235	4.9 mm	1.5 V	400 ns
DS90C401MX	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		CMOS		3.5 ns	EIA-644; TIA-644		STANDARD	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	85 Cel		CONSTANT-CURRENT	-40 Cel	2	TIN LEAD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified					YES	e0	20	235	4.9 mm	.25 V	0 ns
SN75141P-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1		BIPOLAR			GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified		INVERTED	2						9.81 mm		35 ns
SN65MLVD206BD	Texas Instruments	LINE DRIVER	INDUSTRIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1				3.5 ns	EIA-899; TIA-899		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			SMALL OUTLINE		3 V			3 V	1.27 mm	85 Cel	3.3 V		-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.895 mm				1		YES	e4	30	260	4.905 mm		10 ns
UA9636ACJG	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	13.2 V	2		BIPOLAR		140000 ns	EIA-232-E; TIA-232-E; V.10; V.28; EIA-423-B; TIA-423-B	18 mA	STANDARD	12 V		+-12	-12 V	IN-LINE	DIP8,.3		Line Driver or Receivers	.00001 Amp	10.8 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO		NOT SPECIFIED	NOT SPECIFIED	9.58 mm	8 V	0 ns
SN65LVDS9637DGNG4	Texas Instruments	LINE RECEIVER	INDUSTRIAL	GULL WING	8	HTSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2		CMOS			EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH	SSOP8,.19	3 V	Line Driver or Receivers		3 V	.65 mm	85 Cel	3.3 V	TOTEM-POLE	-40 Cel		NICKEL PALLADIUM GOLD	DUAL	S-PDSO-G8	1	1.07 mm		3 mm	Not Qualified	8 Amp	COMPLEMENTARY	2		NO	e4	30	260	3 mm		3 ns
DS25BR101TSD	Texas Instruments	LINE DRIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.6 V	1				.465 ns	GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-XDSO-N8	3	.8 mm		3 mm	Not Qualified					YES	e0			3 mm
THS6052CDDARG3	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2		BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G8		1.68 mm		3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	4.89 mm		0 ns
SN75HVD06DG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		BICMOS		40 ns	EIA-485-A; TIA-485-A; ISO 8482E	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm		3.9 mm	Not Qualified	8 Amp		1	SIGNALING RATE UPTO 10 MBPS	YES	e4	30	260	4.9 mm	2.5 V	70 ns
DS9636AJ/883	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	13.2 V	2		CMOS			EIA-423		STANDARD	12 V			-12 V	IN-LINE					10.8 V	2.54 mm	125 Cel			-55 Cel	2		DUAL	R-GDIP-T8		5.08 mm		7.62 mm					LG-MAX	NO				10.16 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.