SQUARE Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MAX9482EGJ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	2.75 V	1	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	2.5 V	5.25 V	+-5/+-2.5	-2.5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	4.75 V	Line Driver or Receivers		2.25 V	.5 mm	85 Cel	5 V		-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N32		1 mm	5 mm	Not Qualified			1	ALSO REQUIRES -5V SUPPLY	NO	e0			5 mm		0 ns
MAX9247GCM+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	75 mA	STANDARD	3.3 V		3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		Line Driver or Receivers		3 V	.5 mm	105 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified				ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9240AGTM/V+T	Analog Devices		INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			BICMOS	AEC-Q100							1.8,1.8/3.3		CHIP CARRIER	LCC48,.28SQ,20		Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9240AGTM+T	Analog Devices		INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			BICMOS								1.8,1.8/3.3		CHIP CARRIER	LCC48,.28SQ,20		Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9321EUA+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.8 V	1	BIPOLAR			GENERAL PURPOSE	24 mA	DIFFERENTIAL	3.3 V		+-2.25/+-3.8		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers		2.25 V	.65 mm	85 Cel			-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1	CAN OPERATE WITH A -2.25V TO -3.8V SUPPLY IN LVECL MODE	YES	e0		245	3 mm		0 ns
MAX9211ETM	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS			EIA-644; TIA-644	90 mA	STANDARD	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	3	TIN LEAD	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified					YES	e0			7 mm		0 ns
MAX9217ECM+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE		STANDARD	3.3 V		3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
MAX9273GTL+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	40	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS				75 mA				1.8,1.8/3.3		CHIP CARRIER	LCC40,.24SQ,20		Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N40	1			Not Qualified						e3	30	260			0 ns
MAX9210ETM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	VQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	4	CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V				CHIP CARRIER, VERY THIN PROFILE					3 V	.5 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified			4			e3	30	260	7 mm		0 ns
MAX9321AEUA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.8 V	1				GENERAL PURPOSE		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					2.25 V	.65 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1	CAN OPERATE WITH A -2.25V TO -3.8V SUPPLY IN LVECL MODE	YES	e3			3 mm		0 ns
MAX9278GTM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			I2C	.3 mA	DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20				3 V	.5 mm	105 Cel		3-STATE	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm			TRUE	1		YES	e3	30	260	7 mm
MAX9278GTM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			I2C	.3 mA	DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20				3 V	.5 mm	105 Cel		3-STATE	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified		TRUE	1		YES	e3	30	260	7 mm
MAX9277GTM+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS				195 mA				1.8,1.8/3.3		CHIP CARRIER	LCC48,.27SQ,20		Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9248ECM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		GENERAL PURPOSE	120 mA	STANDARD	3.3 V		3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9275GTN/V+T	Analog Devices		INDUSTRIAL	NO LEAD	56	QCCN	SQUARE	PLASTIC	YES			CMOS	AEC-Q100					1.8 V		1.8		CHIP CARRIER	LCC56,.31SQ,20		Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N56	3			Not Qualified						e3	30	260
MAX9277GTM/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100			195 mA				1.8,1.8/3.3		CHIP CARRIER	LCC48,.27SQ,20		Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9279GTN/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	56	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100					1.8 V		1.8		CHIP CARRIER	LCC56,.31SQ,20		Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N56	3			Not Qualified						e3	30	260			0 ns
MAX9282GTM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			I2C	.3 mA	DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20				3 V	.5 mm	105 Cel		3-STATE	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm			TRUE	1		YES	e3	30	260	7 mm
MAX9263GCB/V+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.9 V	1	CMOS			ISO 10605	188 mA	STANDARD	1.8 V				FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ			.00001 Amp	1.7 V	.5 mm	105 Cel		DIFFERENTIAL	-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G64	3	1.2 mm	10 mm		2 Amp	COMPLEMENTARY		ESD Value for OUT+, OUT- pins is 3B	YES	e3	30	260	10 mm	.24 V
MAX9217ETM+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			GENERAL PURPOSE	70 mA	STANDARD	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16		Line Driver or Receivers		3 V	.4 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	6 mm	Not Qualified					YES	e3	30	260	6 mm		0 ns
MAX9404EGJ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	BIPOLAR			GENERAL PURPOSE	118 mA	DIFFERENTIAL	3.3 V		3.3/5		CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-CQCC-N32	1	1 mm	5 mm	Not Qualified			4		YES	e0			5 mm		0 ns
MAX9403EGJ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	BIPOLAR		.437 ns	GENERAL PURPOSE	118 mA	DIFFERENTIAL	3.3 V		2.5/5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		Line Driver or Receivers		2.375 V	.5 mm	85 Cel			-40 Cel	4	TIN LEAD	QUAD	S-CQCC-N32	1	1 mm	5 mm	Not Qualified			4		YES	e0			5 mm		.437 ns
MAX9268GCM/V+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		ISO 10605	280 mA	STANDARD	3.3 V		3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ		Line Driver or Receivers		3 V	.5 mm	105 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
MAX9281GTM/V+T	Analog Devices		INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100			195 mA				1.8,1.8/3.3		CHIP CARRIER	LCC48,.27SQ,20		Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9281GTM+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS				195 mA				1.8,1.8/3.3		CHIP CARRIER	LCC48,.27SQ,20		Line Driver or Receivers			.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9250ETM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			GENERAL PURPOSE	120 mA	STANDARD	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16		Line Driver or Receivers		3 V	.4 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	6 mm	Not Qualified			1		YES	e3	30	260	6 mm		0 ns
MAX9218ETM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			GENERAL PURPOSE	70 mA	DIFFERENTIAL	3.3 V		3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16		Line Driver or Receivers		3 V	.4 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	6 mm	Not Qualified			1			e3	30	260	6 mm		0 ns
MAX9394EHJ+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	BIPOLAR		.72 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	85 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G32	1	1.2 mm	5 mm	Not Qualified			1		YES	e3	30	260	5 mm		.72 ns
MAX9179ETE+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	4	CMOS			EIA-644; TIA-644		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.65 mm	85 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16	1	.8 mm	4 mm	Not Qualified			4			e3	30	260	4 mm		4.6 ns
MAX9157EHJ+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		2.4 ns	GENERAL PURPOSE	95 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP32,.28SQ		Line Driver or Receivers		3 V	.5 mm	85 Cel			-40 Cel	4	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G32	1	1.2 mm	5 mm	Not Qualified	4 Amp		4		YES	e3	30	260	5 mm	.25 V	4.1 ns
MAX9247GCM/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE		STANDARD	3.3 V				FLATPACK, LOW PROFILE, FINE PITCH					3 V	.5 mm	105 Cel			-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified				ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm
MAX9250GCM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	89 mA	STANDARD	3.3 V		3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		Line Driver or Receivers		3 V	.5 mm	105 Cel			-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
ADM5180JP	Analog Devices	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS			EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified	4 Amp	TRUE	8		NO	e0		225	11.505 mm		550 ns
ADM5170JP	Analog Devices	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS		15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
ADM5170APZ	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS		15000 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e3		260	11.505 mm	9 V	0 ns
ADM5170AP-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS		15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
AD8324ACP	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.13 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e0		240	4 mm		0 ns
AD53509JSQ	Analog Devices	LINE DRIVER		GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	11.33 V	1				GENERAL PURPOSE		DIFFERENTIAL	11 V		3.3,-6,11	-6 V	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	HQFP52,.63SQ,40		Other Interface ICs		10.67 V	1 mm					1	TIN LEAD	QUAD	S-PQFP-G52	3	1.6 mm	14 mm	Not Qualified					NO	e0		240	14 mm		0 ns
AD8328ACP-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20		1 mm	4 mm	Not Qualified					YES	e0			4 mm		0 ns
AD53033JSTP	Analog Devices	LINE DRIVER		GULL WING	52	HLQFP	SQUARE	PLASTIC/EPOXY	YES	12.36 V	1	BIPOLAR		2.1 ns	GENERAL PURPOSE		STANDARD	12 V		12,-7	-7 V	FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP52,.68SQ,40		Other Interface ICs		11.64 V	1 mm					1	TIN LEAD	QUAD	S-PQFP-G52	3	1.6 mm	14 mm	Not Qualified					YES	e0		240	14 mm		0 ns
AD8398AACPZ-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES		2				GENERAL PURPOSE		DIFFERENTIAL	6 V		+-6/12	-6 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25		Line Driver or Receivers			.65 mm	85 Cel			-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm	4 mm	Not Qualified				IT ALSO NEED 12V SUPPLY	NO	e3		260	4 mm	17.6 V	0 ns
AD8328ACPZ-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
ADM5180APZ	Analog Devices	LINE RECEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS			EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		TRUE	8		NO	e3		260	11.505 mm		550 ns
AD8328ACP-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	VQCCN	SQUARE	UNSPECIFIED	YES	5.25 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V				CHIP CARRIER, VERY THIN PROFILE					4.75 V	.5 mm	85 Cel			-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e0		240	4 mm		0 ns
ADM5180AP-REEL	Analog Devices	LINE RECEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS			EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	85 Cel		TOTEM-POLE	-40 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified	4 Amp	TRUE	8		NO	e0		225	11.505 mm		550 ns
ADM5180JPZ	Analog Devices	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS			EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				CHIP CARRIER					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		TRUE	8		NO	e3		260	11.505 mm		550 ns
ADM5170APZ-REEL	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS		15000 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel		3-STATE	-40 Cel	8	MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e3		260	11.505 mm	9 V	0 ns
AD8324ACPZ-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3.13 V	.5 mm	85 Cel			-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.