SQUARE Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
AD8398AACPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES		2				GENERAL PURPOSE		DIFFERENTIAL	6 V	+-6/12	-6 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Line Driver or Receivers			.65 mm	85 Cel		-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm	4 mm	Not Qualified				IT ALSO NEED 12V SUPPLY	NO	e3	30	260	4 mm	17.6 V	0 ns
MAX9275GTN+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	56	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS						1.8 V	1.8		CHIP CARRIER	LCC56,.31SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N56	3			Not Qualified						e3	30	260			0 ns
MAX9248GCM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES			CMOS				120 mA		3.3 V	3.3		FLATPACK	QFP48,.35SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1			Not Qualified						e3	30	260
MAX9248GCM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX96706GTJ+T	Analog Devices	LINE RECEIVER		NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1		AEC-Q100		ISO 10605		DIFFERENTIAL	1.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			1.7 V	.5 mm	115 Cel	OPEN-DRAIN	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N32	1	.8 mm	5 mm		2 Amp		1		NO	e3	30	260	5 mm
MAX9282GTM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			I2C	.3 mA	DIFFERENTIAL	3.3 V			CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified		TRUE	1		YES	e3	30	260	7 mm
MAX9273GTL/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	40	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100			75 mA			1.8,1.8/3.3		CHIP CARRIER	LCC40,.24SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N40	1			Not Qualified						e3	30	260			0 ns
MAX9268GCM/V+TGG5	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			ISO 10605	280 mA	DIFFERENTIAL	3.3 V			FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ		.00001 Amp	3 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	3	1.2 mm	7 mm		2 Amp	COMPLEMENTARY	1		NO	e3	30	260	7 mm	.25 V
MAX9258AGCM/V+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES			BICMOS	AEC-Q100					3.3 V	3.3		FLATPACK	QFP48,.35SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1			Not Qualified						e3	30	260
MAX9172ETA	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	3.6 V	2	CMOS			EIA-644; TIA-644	9 mA	DIFFERENTIAL	3.3 V	3.3		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,25	Line Driver or Receivers		3 V	.65 mm	85 Cel		-40 Cel		TIN LEAD	DUAL	S-XDSO-N8	1	.8 mm	3 mm	Not Qualified	4 Amp		2			e0			3 mm		2.5 ns
MAX9279GTN/V+T	Analog Devices		INDUSTRIAL	NO LEAD	56	QCCN	SQUARE	PLASTIC	YES			CMOS	AEC-Q100					1.8 V	1.8		CHIP CARRIER	LCC56,.31SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N56	3			Not Qualified						e3	30	260
MAX9218ECM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		GENERAL PURPOSE	70 mA	DIFFERENTIAL	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1			e3	30	260	7 mm		0 ns
MAX9249GCM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.9 V	1	CMOS	AEC-Q100		ISO 10605	220 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.8		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Line Driver or Receivers		1.7 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e3	30	260	7 mm		0 ns
MAX9257AGTL/V+T	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	40	QCCN	SQUARE	PLASTIC/EPOXY	YES			BICMOS	AEC-Q100					3.3 V	3.3		CHIP CARRIER	LCC40,.2SQ,16	Line Driver or Receivers			.4 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N40	1			Not Qualified						e3	30	260
MAX9247ECM/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		GENERAL PURPOSE	75 mA	STANDARD	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified				ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9272AGTM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1	CMOS			ISO 10605		DIFFERENTIAL	1.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				1.7 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm				1		NO	e3	30	260	7 mm
MAX9248ECM/V+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100			120 mA		3.3 V	3.3		FLATPACK	QFP48,.35SQ,20	Line Driver or Receivers			.5 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1			Not Qualified						e3	30	260
MAX96705GTJ+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1		AEC-Q100		ISO 10605		STANDARD	1.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			1.7 V	.5 mm	115 Cel	OPEN-DRAIN	-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N32	1	.8 mm	5 mm		2 Amp	TRUE			YES	e3	30	260	5 mm
MAX9394EHJ+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	BIPOLAR		.72 ns	EIA-644; TIA-644		DIFFERENTIAL	3.3 V			FLATPACK, THIN PROFILE, FINE PITCH				3 V	.5 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G32	1	1.2 mm	5 mm	Not Qualified			1		YES	e3	30	260	5 mm		.72 ns
MAX9257AGCM/V+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES			BICMOS	AEC-Q100					3.3 V	3.3		FLATPACK	QFP48,.35SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1			Not Qualified						e3	30	260
MAX9250ECM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			GENERAL PURPOSE	89 mA	STANDARD	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQFP-G48	1	1.6 mm	7 mm	Not Qualified			1		YES	e3	30	260	7 mm		0 ns
MAX9401EGJ	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	VQCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.5 V	4	BIPOLAR			GENERAL PURPOSE	118 mA	DIFFERENTIAL	3.3 V	3.3/5		CHIP CARRIER, VERY THIN PROFILE	LCC32,.2SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	4	TIN LEAD	QUAD	S-CQCC-N32	1	1 mm	5 mm	Not Qualified			4		YES	e0			5 mm		0 ns
MAX9257AGCM/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS	AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1			e3	30	260	7 mm		0 ns
MAX96705GTJ+T	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1		AEC-Q100		ISO 10605		STANDARD	1.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			1.7 V	.5 mm	115 Cel	OPEN-DRAIN	-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N32	1	.8 mm	5 mm		2 Amp	TRUE			YES	e3	30	260	5 mm
MAX9272AGTM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1	CMOS			ISO 10605		DIFFERENTIAL	1.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				1.7 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm				1		NO	e3	30	260	7 mm
MAX9282GTM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS	AEC-Q100		I2C	.3 mA	DIFFERENTIAL	3.3 V			CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm			TRUE	1		YES	e3	30	260	7 mm
MAX9321EUA+	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.8 V	1				GENERAL PURPOSE		DIFFERENTIAL	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				2.25 V	.65 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1	CAN OPERATE WITH A -2.25V TO -3.8V SUPPLY IN LVECL MODE	YES	e3	30	260	3 mm		0 ns
MAX9271GTJ/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS	AEC-Q100		ISO 10605	75 mA		1.8 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Line Driver or Receivers		1.7 V	.5 mm	105 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N32	1	.8 mm	5 mm	Not Qualified					YES	e3	30	260	5 mm		0 ns
MAX9217ECM/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		GENERAL PURPOSE	70 mA	STANDARD	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
MAX9272AGTM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1	CMOS			ISO 10605		DIFFERENTIAL	1.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				1.7 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm				1		NO	e3	30	260	7 mm
MAX9248ECM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9947ETE+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	5.5 V	1	BICMOS		5000 ns	EIA-485	20 mA	SCHMITT TRIGGER	5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20			3 V	.5 mm	105 Cel	OPEN-DRAIN	-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16	1	.8 mm	3 mm		3.3 Amp	TRUE	1		NO	e3	30	260	3 mm		11000 ns
MAX9259GTN/V+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	56	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1	CMOS			ISO 10605		STANDARD	1.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				1.7 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N56	3	.8 mm	8 mm	Not Qualified			1		YES	e3	30	260	8 mm
MAX9273GTL+T	Analog Devices		INDUSTRIAL	NO LEAD	40	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS				75 mA			1.8,1.8/3.3		CHIP CARRIER	LCC40,.24SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N40	1			Not Qualified						e3	30	260
MAX9250ECM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9273GTL/V+T	Analog Devices		INDUSTRIAL	NO LEAD	40	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100			75 mA			1.8,1.8/3.3		CHIP CARRIER	LCC40,.24SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N40	1			Not Qualified						e3	30	260
MAX9277GTM+T	Analog Devices		INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS				195 mA			1.8,1.8/3.3		CHIP CARRIER	LCC48,.27SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX96706GTJ/V+	Analog Devices	LINE RECEIVER		NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1		AEC-Q100		ISO 10605		DIFFERENTIAL	1.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			1.7 V	.5 mm	115 Cel	OPEN-DRAIN	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N32	1	.8 mm	5 mm		2 Amp		1		NO	e3	30	260	5 mm
MAX9217ETM+T	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			GENERAL PURPOSE	70 mA	STANDARD	3.3 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.24SQ,16	Line Driver or Receivers		3 V	.4 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	6 mm	Not Qualified					YES	e3	30	260	6 mm		0 ns
MAX9247ECM+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	75 mA	STANDARD	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9257AGTL/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	40	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	BICMOS	AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC40,.2SQ,16	Line Driver or Receivers		3 V	.4 mm	105 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N40	1	.8 mm	5 mm	Not Qualified			1			e3	30	260	5 mm		0 ns
MAX9213ETM+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS			EIA-644; TIA-644		STANDARD	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				3 V	.5 mm	85 Cel		-40 Cel	3	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm
MAX9247GCM+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	75 mA	STANDARD	3.3 V			FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20		.00002 Amp	3 V	.5 mm	105 Cel	DIFFERENTIAL	-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm			COMPLEMENTARY			YES	e3	30	260	7 mm	.25 V
MAX9247ECM+T	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS				75 mA	STANDARD	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
MAX9271GTJ+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			ISO 10605	75 mA		1.8 V	1.8		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Line Driver or Receivers		1.7 V	.5 mm	105 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N32	1	.8 mm	5 mm	Not Qualified					YES	e3	30	260	5 mm		0 ns
MAX9278GTM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS	AEC-Q100		I2C	.3 mA	DIFFERENTIAL	3.3 V			CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm			TRUE	1		YES	e3	30	260	7 mm
MAX9281GTM+T	Analog Devices		INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS				195 mA			1.8,1.8/3.3		CHIP CARRIER	LCC48,.27SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9259GCB/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.9 V	1	CMOS			ISO 10605		STANDARD	1.8 V			FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH				1.7 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified			1		YES	e3	30	260	10 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.