SQUARE Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
MAX9282GTM/V+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS	AEC-Q100		I2C	.3 mA	DIFFERENTIAL	3.3 V			CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	7 mm	Not Qualified		TRUE	1		YES	e3	30	260	7 mm
MAX9277GTM/V+T	Analog Devices		INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100			195 mA			1.8,1.8/3.3		CHIP CARRIER	LCC48,.27SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9278GGM/VY+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS	AEC-Q100		I2C	.3 mA	DIFFERENTIAL	3.3 V			CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel			QUAD	S-XQCC-N48		.8 mm	7 mm			TRUE	1		YES		NOT SPECIFIED	NOT SPECIFIED	7 mm
MAX9271GTJ/V+T	Analog Devices		INDUSTRIAL	NO LEAD	32	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100			75 mA		1.8 V	1.8		CHIP CARRIER	LCC32,.2SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N32	1			Not Qualified						e3	30	260
MAX9268GCM/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		ISO 10605	280 mA	STANDARD	3.3 V	3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
MAX9218ETM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	VQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			GENERAL PURPOSE	70 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.3		CHIP CARRIER, VERY THIN PROFILE	LCC48,.24SQ,16	Line Driver or Receivers		3 V	.4 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-XQCC-N48	1	.8 mm	6 mm	Not Qualified			1			e3	30	260	6 mm		0 ns
MAX9157EHJ+T	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	32	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		2.4 ns	GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			FLATPACK, THIN PROFILE, FINE PITCH				3 V	.5 mm	85 Cel		-40 Cel	4	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G32	1	1.2 mm	5 mm	Not Qualified			4		YES	e3	30	260	5 mm		4.1 ns
MAX9248GCM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	AEC-Q100		GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9260GCB/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.9 V	1	CMOS			ISO 10605		STANDARD	1.8 V			FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH				1.7 V	.5 mm	105 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified					YES	e3	30	260	10 mm
MAX9218ECM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	70 mA	DIFFERENTIAL	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1			e3	30	260	7 mm		0 ns
MAX9258AGCM/V+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS	AEC-Q100		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1			e3	30	260	7 mm		0 ns
MAX9281GTM/V+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	48	QCCN	SQUARE	PLASTIC/EPOXY	YES			CMOS	AEC-Q100			195 mA			1.8,1.8/3.3		CHIP CARRIER	LCC48,.27SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQCC-N48	1			Not Qualified						e3	30	260
MAX9264GCB/V+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			ISO 10605	275 mA	DIFFERENTIAL	3.3 V			FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ		.00001 Amp	3 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G64	3	1.2 mm	10 mm		2 Amp		1	ESD Value for IN+, IN- pins is 3B	NO	e3	30	260	10 mm
MAX9249GCM/V+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	1.9 V	1	CMOS	AEC-Q100		ISO 10605	220 mA	DIFFERENTIAL SCHMITT TRIGGER	1.8 V	1.8		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	Line Driver or Receivers		1.7 V	.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e3	30	260	7 mm		0 ns
MAX9235ETE+	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS			GENERAL PURPOSE	45 mA	SCHMITT TRIGGER	3.3 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.12SQ,20	Line Driver or Receivers		3 V	.5 mm	105 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-XQCC-N16	1	.8 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		0 ns
MAX9278GGM/VY+	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	48	HQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS	AEC-Q100		I2C	.3 mA	DIFFERENTIAL	3.3 V			CHIP CARRIER, HEAT SINK/SLUG	LCC48,.28SQ,20			3 V	.5 mm	105 Cel	3-STATE	-40 Cel			QUAD	S-XQCC-N48		.8 mm	7 mm			TRUE	1		YES		NOT SPECIFIED	NOT SPECIFIED	7 mm
MAX9218ECM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	70 mA	DIFFERENTIAL	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1			e3	30	260	7 mm		0 ns
MAX9248ECM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX9250GCM+T	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES			CMOS				89 mA		3.3 V	3.3		FLATPACK	QFP48,.35SQ,20	Line Driver or Receivers			.5 mm	105 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1			Not Qualified						e3	30	260
MAX9217ECM+	Analog Devices	LINE DRIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE		STANDARD	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel	1	Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified					YES	e3	30	260	7 mm		0 ns
MAX9250ECM+	Analog Devices	LINE RECEIVER	INDUSTRIAL	GULL WING	48	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE	120 mA	STANDARD	3.3 V	3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP48,.35SQ,20	Line Driver or Receivers		3 V	.5 mm	85 Cel		-40 Cel		Matte Tin (Sn) - annealed	QUAD	S-PQFP-G48	1	1.6 mm	7 mm	Not Qualified			1	ALSO OPEARTES FROM 1.8 TO 3.3 SUPLY	YES	e3	30	260	7 mm		0 ns
MAX96705GTJ/V+T	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1		AEC-Q100		ISO 10605		STANDARD	1.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20			1.7 V	.5 mm	115 Cel	OPEN-DRAIN	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N32	1	.8 mm	5 mm		2 Amp	TRUE			YES	e3	30	260	5 mm
MAX96701GTG/V+	Analog Devices	LINE DRIVER		NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES	1.9 V	1		AEC-Q100		GENERAL PURPOSE	88 mA	STANDARD	1.8 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC24,.16SQ,20			1.7 V	.5 mm	115 Cel	DIFFERENTIAL	-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N24	1	.8 mm	4 mm		2 Amp	COMPLEMENTARY			YES	e3	30	260	4 mm	.24 V
ADM5180JP-REEL	Analog Devices	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS			EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5		CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	TOTEM-POLE	0 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified	4 Amp	TRUE	8		NO	e0		225	11.505 mm		550 ns
ADM5180JPZ-REEL	Analog Devices	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS			EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			CHIP CARRIER				4.75 V	1.27 mm	70 Cel	TOTEM-POLE	0 Cel		MATTE TIN	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified		TRUE	8			e3			11.505 mm		550 ns
ADM5180AP	Analog Devices	LINE RECEIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS			EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5		CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers		4.75 V	1.27 mm	85 Cel	TOTEM-POLE	-40 Cel		TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified	4 Amp	TRUE	8		NO	e0		225	11.505 mm		550 ns
AD8324ACPZ	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				3.13 V	.5 mm	85 Cel		-40 Cel	1	MATTE TIN	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e3		260	4 mm		0 ns
AD8324ACP-R2	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				3.13 V	.5 mm	85 Cel		-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20		1 mm	4 mm	Not Qualified					YES	e0			4 mm		0 ns
ADM5170AP	Analog Devices	LINE DRIVER	INDUSTRIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS		15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V	+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	85 Cel	3-STATE	-40 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
ADLD8404ACPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES		2				GENERAL PURPOSE		DIFFERENTIAL	14 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel		-40 Cel	2		QUAD	S-XQCC-N24		.8 mm	4 mm	Not Qualified					NO				4 mm
AD8324ACP-REEL7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	20	HVQCCN	SQUARE	UNSPECIFIED	YES	3.47 V	1				GENERAL PURPOSE		STANDARD	3.3 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE				3.13 V	.5 mm	85 Cel		-40 Cel	1	TIN LEAD	QUAD	S-XQCC-N20	3	1 mm	4 mm	Not Qualified					YES	e0		240	4 mm		0 ns
ADLD8404ACPZ-RL	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	24	HVQCCN	SQUARE	UNSPECIFIED	YES		2				GENERAL PURPOSE		DIFFERENTIAL	14 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					.5 mm	85 Cel		-40 Cel	2		QUAD	S-XQCC-N24		.8 mm	4 mm	Not Qualified					NO				4 mm
AD8398AACPZ-R7	Analog Devices	LINE DRIVER	INDUSTRIAL	NO LEAD	16	HVQCCN	SQUARE	UNSPECIFIED	YES		2				GENERAL PURPOSE		DIFFERENTIAL	6 V	+-6/12	-6 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC16,.16SQ,25	Line Driver or Receivers			.65 mm	85 Cel		-40 Cel	2	MATTE TIN	QUAD	S-XQCC-N16	3	.8 mm	4 mm	Not Qualified				IT ALSO NEED 12V SUPPLY	NO	e3	30	260	4 mm	17.6 V	0 ns
ADM5170JP-REEL	Analog Devices	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	11 V	1	CMOS		15 ns	EIA-232-E; V.10; X.26; EIA-423-A	36 mA	STANDARD	10 V	+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ	Line Driver or Receivers	.000001 Amp	9 V	1.27 mm	70 Cel	3-STATE	0 Cel	8	TIN LEAD	QUAD	S-PQCC-J28	1	4.57 mm	11.505 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e0		225	11.505 mm	9 V	0 ns
LTC2850IDD#TR	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				3 V	.5 mm	85 Cel		-40 Cel	1	Tin/Lead (Sn/Pb)	DUAL	S-PDSO-N8	1	.8 mm	3 mm	Not Qualified			1		YES	e0			3 mm		70 ns
ADM3311EACP	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	3	CMOS			EIA-232	35 mA	SCHMITT TRIGGER	3.3 V	3/3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Line Driver or Receivers		2.7 V	.5 mm	85 Cel		-40 Cel	3	TIN LEAD	QUAD	S-XQCC-N32	3	1 mm	5 mm	Not Qualified	1.6 Amp		5		NO	e0		240	5 mm	10 V	1000 ns
LTC2850CMS8#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				3 V	.65 mm	70 Cel		0 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
LTC2877IDD#TRPBF	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	10	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1	BICMOS		50 ns	EIA-422; EIA-485	1.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,20		.00002 Amp	4.5 V	.5 mm	85 Cel	DIFFERENTIAL	-40 Cel	1	MATTE TIN	DUAL	S-PDSO-N10	1	.8 mm	3 mm		3 Amp	COMPLEMENTARY	1	ALSO OPERATE WITH 3V SUPPLY	YES	e3	30	260	3 mm		70 ns
LTC2857CDD-1#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1			50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				4.5 V	.5 mm	70 Cel		0 Cel	1	MATTE TIN	DUAL	S-PDSO-N8	1	.8 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
LTC2856CMS8-1#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1			50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				4.5 V	.65 mm	70 Cel		0 Cel	1	Matte Tin (Sn) - annealed	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
LTC2857IDD-1	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1			50 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				4.5 V	.5 mm	85 Cel		-40 Cel	1	Tin/Lead (Sn/Pb)	DUAL	S-PDSO-N8	1	.8 mm	3 mm	Not Qualified			1		YES	e0			3 mm		70 ns
AD2429KCPZ	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	1.98 V	2	DMOS			I2C	13 mA	DIFFERENTIAL	1.9 V			CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20		.00001 Amp	1.7 V	.5 mm	70 Cel	OPEN-DRAIN	0 Cel	2		QUAD	S-XQCC-N32		.8 mm	5 mm		1 Amp	COMPLEMENTARY	2		YES			260	5 mm	.21 V
ADM1486ARM	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		15 ns	EIA-422; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				4.75 V	.65 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified			1		YES	e0			3 mm		20 ns
LTC2851CMS8#TRPBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		50 ns	EIA-485-A; TIA-485-A; EIA-422		DIFFERENTIAL SCHMITT TRIGGER	3.3 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH				3 V	.65 mm	70 Cel		0 Cel	1	MATTE TIN	DUAL	S-PDSO-G8	1	1.1 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
AD8143ACPZ-RL	Analog Devices	LINE RECEIVER	INDUSTRIAL	NO LEAD	32	HVQCCN	SQUARE	UNSPECIFIED	YES	12 V	1				GENERAL PURPOSE		DIFFERENTIAL	5 V	+-5/+-12	-5 V	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	Line Driver or Receivers		4.5 V	.5 mm	85 Cel		-40 Cel		MATTE TIN	QUAD	S-XQCC-N32		1 mm	5 mm	Not Qualified			3	ALSO OPERATES AT SINGLE 5V SUUPLY		e3			5 mm		0 ns
LTC2857CDD-2#PBF	Analog Devices	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	8	HVSON	SQUARE	PLASTIC/EPOXY	YES	5.5 V	1			1500 ns	EIA-485-A; TIA-485-A		DIFFERENTIAL SCHMITT TRIGGER	5 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				4.5 V	.5 mm	70 Cel		0 Cel	1	MATTE TIN	DUAL	S-PDSO-N8	1	.8 mm	3 mm	Not Qualified			1		YES	e3	30	260	3 mm		70 ns
ADM4852ACP	Analog Devices	LINE TRANSCEIVER	INDUSTRIAL	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	5.25 V	1			2500 ns	EIA-422; EIA-485	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5		SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE	SOLCC8,.12,20	Line Driver or Receivers		4.75 V	.5 mm	85 Cel		-40 Cel	1	TIN LEAD	DUAL	S-XDSO-N8		.9 mm	3 mm	Not Qualified	4 Amp		1		YES	e0			3 mm	1.5 V	1000 ns
ADA4941-1YCPZ-RL	Analog Devices	LINE DRIVER	AUTOMOTIVE	NO LEAD	8	HVSON	SQUARE	UNSPECIFIED	YES	12 V	1				GENERAL PURPOSE		DIFFERENTIAL	3 V			SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE				2.7 V	.5 mm	125 Cel		-40 Cel	1	MATTE TIN	DUAL	S-XDSO-N8	3	.9 mm	3 mm	Not Qualified					YES	e3		260	3 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.