COMMERCIAL Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75LP1196CDBRR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1			EIA-232-F			5 V			-12 V	SMALL OUTLINE, SHRINK PITCH						.65 mm	70 Cel	12 V		0 Cel	1		DUAL	R-PDSO-G20		2 mm	5.3 mm	Not Qualified			1						7.2 mm
SN75121NSR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR	50 ns	GENERAL PURPOSE	60 mA	GATED	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.3	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	OPEN-EMITTER	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	8 Amp	TRUE			NO	e4	30	260	10.2 mm	2.4 V	0 ns
SN75ALS161DWE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	8	BIPOLAR	20 ns	IEEE-488	75 mA	SCHMITT TRIGGER	5 V	5.25 V			SMALL OUTLINE		4.75 V		.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V		0 Cel	8	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	48 Amp	TRUE	8		NO	e4	NOT SPECIFIED	260	12.8 mm	2.7 V	14 ns
SN75LBC970	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1			EIA-485; ISO 8482		DIFFERENTIAL					SMALL OUTLINE, SHRINK PITCH						.635 mm	70 Cel			0 Cel	9		DUAL	R-PDSO-G56		2.794 mm	7.5 mm	Not Qualified			9		YES				18.415 mm
TRSF3223ECDBG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		2		NO	e4	30	260	7.2 mm	10 V	0 ns
GD75232PWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BIPOLAR	175 ns	EIA-232-F; TIA-232-F; V.28	25 mA	SCHMITT TRIGGER	5 V	15 V	5,+-9/+-12	-9 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	70 Cel	9 V	OPEN-COLLECTOR	0 Cel	3	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	10 Amp	TRUE	5	EASY INTERFACE BETWEEN UART, SERIAL-PORT CONNECTOR OF IBM PC/AT	NO	e4	NOT SPECIFIED	260	6.5 mm	12 V	150 ns
SN75LP196DWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3	BIPOLAR	1600 ns	EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V	15 V	5,+-9/+-12	-12 V	SMALL OUTLINE	SOP20,.4	9 V	Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	70 Cel	12 V		0 Cel	5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	2 Amp		3	ALSO REQUIRES -9 TO -15 SUPPLY	NO	e4	30	260	12.8 mm	10 V	900 ns
SN75108BNP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR			30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					16 Amp										25 ns
SN75161BDW-00R	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR	20 ns	IEEE-488		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	8		DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified			8		NO				12.8 mm		22 ns
AM26LS32ACN-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		EIA-422-A; EIA-423-A		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	4						19.305 mm		35 ns
SN75LBC241DB	Texas Instruments		COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES			BICMOS			8 mA		5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers			.635 mm	70 Cel			0 Cel	4		DUAL	R-PDSO-G28				Not Qualified	3.2 Amp				NO					10 V
TRSF3243CDBG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	5			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel			0 Cel	3		DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified	1.6 Amp		5	ALSO OPERATES AT 5V	NO		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	10 V	0 ns
SN75C1168NE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	BICMOS	12 ns	EIA-422-B; TIA-422-B; V.11	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	20 Amp	COMPLEMENTARY	2	RECEIVER 3-STATE OUTPUTS	YES	e4			19.305 mm	2 V	27 ns
SN75C188DBLE-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	1	BIMOS	3500 ns	EIA-232-D	.16 mA	GATED	12 V			-12 V	SMALL OUTLINE, SHRINK PITCH					4.5 V	.65 mm	70 Cel		TOTEM-POLE	0 Cel	4		DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO				6.2 mm
SN75C189ANE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6 V	4	BIPOLAR		EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V	6 V	5		IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	.0083 Amp	4.5 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm		6000 ns
SN75ALS194J	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO		4	TTL	14 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00005 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-XDIP-T16				Not Qualified					YES					2 V
TRSF3232CDW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2	ALSO OPERATED AT 5V SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	10.3 mm	10 V	0 ns
LT1081CDW-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR		EIA-232-D	22 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified		INVERTED	2	EXTERNAL CHARGE PUMP	NO				10.3 mm
SN75C3238DB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	BIPOLAR		EIA-232	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel			0 Cel	5		DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified	1.6 Amp		3	CAN ALSO OPERATE WITH A 5V SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	10.2 mm	10 V	0 ns
SN75ALS162DW-00R	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	8	TTL	20 ns	IEEE-488		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified			1		NO				15.4 mm		14 ns
TRSF3221ECDBRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	1	ALSO OPERATES AT 5V	NO	e4	NOT SPECIFIED	260	6.2 mm	10 V	0 ns
SN75122J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR			72 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T16					16 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75124J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR			72 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T16				Not Qualified	16 Amp										30 ns
SN75ALS130D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.95 V	1	BIPOLAR	28 ns	IBM 360/370	47 mA	STANDARD	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		OPEN-EMITTER	0 Cel	4		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY		TOTEM-POLE INVERTED OUTPUT; COMMON FAULT FLAG	NO				9.9 mm
SN75LBC971	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1			EIA-485; ISO 8482		DIFFERENTIAL SCHMITT TRIGGER					SMALL OUTLINE, SHRINK PITCH						.635 mm	70 Cel			0 Cel	9		DUAL	R-PDSO-G56		2.794 mm	7.5 mm	Not Qualified			9		YES				18.415 mm
SN75C3238EDW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	BIPOLAR		EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel			0 Cel	5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		3	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	17.9 mm	10 V	0 ns
DS90C187LFX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD	92	LGA	SQUARE	PLASTIC/EPOXY	YES		5				150 mA		1.8 V	1.89 V	1.8		GRID ARRAY	SLGA92,14X14,20	1.71 V	Line Driver or Receivers			.5 mm	70 Cel	1.8 V		-10 Cel		NICKEL PALLADIUM GOLD	BOTTOM	S-PBGA-N92	3	1 mm	7 mm	Not Qualified			5		YES	e4	30	260	7 mm		0 ns
SN75128N-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2	BIPOLAR		IBM 360/370	53 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T20		5.08 mm	7.62 mm	Not Qualified		INVERTED	4						24.325 mm		30 ns
SN75LBC174A16DWG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BICMOS	11 ns	EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	23 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.4	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	10.3 mm	1 V	0 ns
SN75C3243PW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS		EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel	3	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	5	ALSO OPERATES AT 5V SUPPLY	NO	e4	NOT SPECIFIED	260	9.7 mm	10 V	0 ns
SN75119DR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR	30 ns	GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00004 Amp	4.5 V	1.27 mm	70 Cel		3-STATE	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	2	1.75 mm	3.9 mm	Not Qualified	15 Amp	COMPLEMENTARY	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O	YES	e4	30	260	4.9 mm	2 V	75 ns
AM26LV31D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	BICMOS	12 ns	V.11; EIA-422-B		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDSO-G16				Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED		.95 V	0 ns
MAX232NSE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	BICMOS		EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified			2	EXTERNAL CHARGE PUMP	NO	e4	30	260	10.2 mm
SN75C3238EDWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	BIPOLAR		EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP28,.4	3 V	Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel	3.3 V		0 Cel	5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		3	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	17.9 mm	10 V	0 ns
SN75207BJ	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR			30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14				Not Qualified	16 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75185DWE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BIPOLAR	500 ns	EIA-232-F; TIA-232-F; V.28	30 mA	SCHMITT TRIGGER	5 V	15 V	+-9	-9 V	SMALL OUTLINE	SOP20,.4	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel	9 V	TOTEM-POLE	0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	10 Amp	INVERTED	5		NO	e4	30	260	12.8 mm	12 V	500 ns
SN75113N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR	30 ns	GENERAL PURPOSE	65 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	2		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY		1 SINGLE INPUT DRIVER; CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES				19.305 mm		0 ns
DS90CR218MTD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	70 Cel			-10 Cel			DUAL	R-PDSO-G48		1.1 mm	6.1 mm				21	SEATED HGT-NOM	NO				12.5 mm
SN75107BN-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT					19.305 mm		25 ns
SN75LVDS051DG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		6 ns	EIA-644; TIA-644	20 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		2		YES	e4	30	260	9.9 mm	.247 V	6 ns
SN75162BN-10	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	22	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	8	TTL	20 ns	IEEE-488		SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	1		DUAL	R-PDIP-T22		5.08 mm	10.16 mm	Not Qualified			1		NO						22 ns
SN75207NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR			30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					16 Amp										35 ns
TRSF3222ECPWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		2		NO	e4	30	260	6.5 mm	10 V	0 ns
THS6032CVFP	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	32	HLQFP	SQUARE	PLASTIC/EPOXY	YES	16 V	1	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V	16 V		-5 V	FLATPACK, HEAT SINK/SLUG, LOW PROFILE		5 V			3 V	.8 mm	70 Cel	15 V		0 Cel	2		QUAD	S-PQFP-G32		1.6 mm	7 mm	Not Qualified				ALSO REQUIRES -5V TO -16V SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	7 mm		0 ns
TUSB6020ZQE	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			GENERAL PURPOSE		STANDARD	3.3 V				GRID ARRAY, VERY THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	1	TIN SILVER COPPER	BOTTOM	S-PBGA-B80	3	1 mm	5 mm	Not Qualified			1	IT ALSO NEED 1.5V DIGITAL CORE SUPPLY VOLTAGE	NO	e1	30	260	5 mm		0 ns
SN75LVDT390PW	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.2 mm	4.4 mm	Not Qualified	8 Amp		4		NO	e4	30	260	5 mm		4 ns
SN75107ADE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO	e4	30	260	8.65 mm		25 ns
SN75158JG	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR	25 ns				5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel			0 Cel	2		DUAL	R-XDIP-T8				Not Qualified					YES					2 V

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.