COMMERCIAL Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75119JG4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR			60 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel			1		DUAL	R-XDIP-T8						15 Amp				YES					2 V	75 ns
SN75172DW-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	65 ns	V.11; X.27; EIA-422-A; EIA-485	60 mA	STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	4		DUAL	R-PDSO-G20		2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES				12.8 mm
SN75C3238EDBR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		BIPOLAR		EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2 mm		5.3 mm	Not Qualified	.001 Amp	TRUE	3	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	10.2 mm	10 V	0 ns
UA9636ACJG-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	13.2 V	1		BIPOLAR		EIA-232-C; EIA-423-A; FED STD 1030	18 mA	STANDARD	12 V			-12 V	IN-LINE					10.8 V	2.54 mm	70 Cel		TOTEM-POLE	2		DUAL	R-GDIP-T8		5.08 mm		7.62 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO				9.6 mm		0 ns
UA9639CD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		V.10; V.11; EIA-422-B; EIA-423-B	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		TOTEM-POLE			DUAL	R-PDSO-G8		1.75 mm		3.9 mm	Not Qualified	20 Amp	TRUE	2		NO		NOT SPECIFIED	NOT SPECIFIED	4.9 mm		85 ns
AM26LS31CN-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR	20 ns	EIA-422-A; FED STD 1020		STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	4		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm
SN75ALS193DE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		V.10; V.11; EIA-422-B; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		3-STATE		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	16 Amp	TRUE	4		NO	e4	30	260	9.9 mm		22 ns
SN75125J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR			47 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel					DUAL	R-XDIP-T16					Not Qualified	16 Amp										30 ns
SN75LBC172DWG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS	20 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified		COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
SN75ALS162N	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	22	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	8		TTL	20 ns	IEEE-488		SCHMITT TRIGGER	5 V				IN-LINE					4.75 V		70 Cel			8		DUAL	R-PDIP-T22					Not Qualified			8		NO		NOT SPECIFIED	NOT SPECIFIED			10 ns
SN75C198N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	4		BIMOS	3500 ns	EIA-232-E; TIA-232-E; V.28	.16 mA	GATED	12 V	15 V	+-5/+-12	-12 V	IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	70 Cel	12 V	3-STATE	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED		2 SINGLE INPUT DRIVERS	NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	8 V	0 ns
SN75208BJ4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR			30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel					DUAL	R-XDIP-T14						16 Amp										35 ns
SN75LP1185PWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3		BIPOLAR	1600 ns	EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V	15 V		-12 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	9 V			4.75 V	.65 mm	70 Cel	12 V		3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm		4.4 mm	Not Qualified			5	ALSO REQUIRES -9 TO -15 SUPPLY	NO	e4	30	260	6.5 mm		900 ns
TRSF3222CDB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel			2		DUAL	R-PDSO-G20		2 mm		5.3 mm	Not Qualified	1.6 Amp		2	ALSO OPERATES AT 5V SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	7.2 mm	10 V	0 ns
SN75LV4737ADB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		CMOS	850 ns	EIA-232-F; TIA-232-F; V.11	20.7 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V	TOTEM-POLE	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2 mm		5.3 mm	Not Qualified	.001 Amp	TRUE	5	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	10.2 mm		200 ns
SN75LPE185DWRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3		BIPOLAR	1600 ns	EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V	15 V	5,+-12	-12 V	SMALL OUTLINE	SOP24,.4	9 V	Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	70 Cel	12 V		3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	2.65 mm		7.5 mm	Not Qualified	2 Amp		5		NO	e4	30	260	15.4 mm	10 V	900 ns
UA9639CP-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		EIA-422-A; EIA-423-A; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE			DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified		TRUE	2						9.81 mm		85 ns
SN75208N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR			30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel					DUAL	R-PDIP-T14						16 Amp										35 ns
SN75173DE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485-A; TIA-485-A	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		3-STATE		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	16 Amp	TRUE	4		NO	e4	30	260	9.9 mm		35 ns
AM26LS33ACN3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				TTL			70 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel					DUAL	R-PDIP-T16						8 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75LVDS389DBTRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	38	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	8		CMOS	2.9 ns	EIA-644; TIA-644	70 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP38,.25,20	3 V	Line Driver or Receivers	.00002 Amp	3 V	.5 mm	70 Cel	3.3 V	3-STATE	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G38	2	1.2 mm		4.4 mm	Not Qualified		TRUE			YES	e4	30	260	9.7 mm	.247 V	0 ns
UA9637ACP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR			50 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers			2.54 mm	70 Cel					DUAL	R-PDIP-T8						20 Amp										25 ns
SN75185DBG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3		BIPOLAR	500 ns	EIA-232-F; TIA-232-F; V.28	30 mA	SCHMITT TRIGGER	5 V	15 V	5,+-9/+-12	-9 V	SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	70 Cel	9 V		3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2 mm		5.3 mm	Not Qualified	10 Amp		5		NO	e4	30	260	7.2 mm	12 V	500 ns
SN75189AJ-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO		1		BIPOLAR		EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				IN-LINE						2.54 mm	70 Cel		TOTEM-POLE			DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.56 mm		85 ns
SN75136D-00R	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		BIPOLAR	24 ns	GENERAL PURPOSE	87 mA	STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	4		DUAL	R-PDSO-G16		1.75 mm		3.9 mm	Not Qualified		INVERTED	4	TRISTATABLE RECEIVERS; COMMON I/O	NO				9.9 mm		18 ns
SN75146P3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR					5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers			2.54 mm	70 Cel					DUAL	R-PDIP-T8						20 Amp										300 ns
MAX3318CPWRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3 V	2				EIA-232	2 mA	SCHMITT TRIGGER	2.5 V		2.25/3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		2.25 V	.65 mm	70 Cel			2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm		4.4 mm	Not Qualified	.5 Amp		2		NO	e4	30	260	6.5 mm	7.4 V	0 ns
SN75LVDM977DLR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9		CMOS	8.8 ns	X3.277; SCSI-2; SCSI-3	26 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP56,.4		Line Driver or Receivers	.00005 Amp	4.75 V	.635 mm	70 Cel			9		DUAL	R-PDSO-G56		2.79 mm		7.5 mm	Not Qualified	2 Amp		9	SUPPORTS SINGLE-ENDED AND LOW-VOLTAGE DIFFERENTIAL SCSI	YES		NOT SPECIFIED	NOT SPECIFIED	18.415 mm	.2 V	10 ns
SN75114J	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	2		BIPOLAR	30 ns	GENERAL PURPOSE		GATED	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel			2		DUAL	R-GDIP-T16		5.08 mm		7.62 mm	Not Qualified				CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	1.55 V	0 ns
SN75ALS175NSLE	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-B; EIA-423-B; EIA-485	24 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		3-STATE			DUAL	R-PDSO-G16		2 mm		5.3 mm	Not Qualified	8 Amp	TRUE	4		NO		NOT SPECIFIED	NOT SPECIFIED	10.2 mm		27 ns
SN75061N-10	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1			160 ns	IEEE-802.3		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			1		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified			1		YES				19.305 mm		35 ns
SN75C1154DWRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4		BIMOS	3500 ns	EIA-232-F; TIA-232-F; V.28	.6 mA	SCHMITT TRIGGER	5 V	15 V	5,+-5/+-12	-12 V	SMALL OUTLINE	SOP20,.4	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified	3.2 Amp	INVERTED	4		NO	e4	30	260	12.8 mm	8 V	4000 ns
SN75163BN	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	8		BIPOLAR	20 ns	GENERAL PURPOSE		SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			8		DUAL	R-PDIP-T20		5.08 mm		7.62 mm	Not Qualified			8		NO		NOT SPECIFIED	NOT SPECIFIED	24.325 mm		22 ns
SN75ALS195J3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO				TTL			35 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel					DUAL	R-XDIP-T16						16 Amp										22 ns
TRS213CDBRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4				EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3		Line Driver or Receivers	.00001 Amp	4.5 V	.65 mm	70 Cel			4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2 mm		5.3 mm	Not Qualified	1.6 Amp		5	ALSO OPERATES AT 5V	NO	e4	30	260	10.2 mm	10 V	10000 ns
SN75ALS173NSLE	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-B; EIA-423-B; EIA-485	24 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		3-STATE			DUAL	R-PDSO-G16		2 mm		5.3 mm	Not Qualified	8 Amp	TRUE	4				NOT SPECIFIED	NOT SPECIFIED	10.2 mm		27 ns
SN75ALS191P	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR	7 ns	V.11; EIA-422-B	40 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers	.000025 Amp	4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm		7.62 mm	Not Qualified	5 Amp	COMPLEMENTARY			YES	e4			9.81 mm	2 V	0 ns
SN75LVDS32D	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4				EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel	3.3 V			NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	9.9 mm		6 ns
SN75971B1DLR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9			14 ns	X3.131; X3.277; EIA-485; SCSI-2; SCSI-3; ISO 8482		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH					4.75 V	.635 mm	70 Cel			9		DUAL	R-PDSO-G56		2.79 mm		7.5 mm	Not Qualified			9		YES		NOT SPECIFIED	NOT SPECIFIED	18.415 mm		18.1 ns
SN75ALS126J3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO				TTL	34 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel			4		DUAL	R-XDIP-T16										NO					2.96 V
SN75C3222DWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2				EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP20,.4	3 V	Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel	3.3 V		2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified	1.6 Amp		2	CAN ALSO OPERATE WITH A 5V SUPPLY	NO	e4	NOT SPECIFIED	260	12.8 mm	10 V	0 ns
SN75107ADRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel				NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm		3.9 mm	Not Qualified	16 Amp		2	ADDITIONAL COMMON STROBE INPUT	NO	e4	30	260	8.65 mm		25 ns
SN75ALS173N-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1		BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A; EIA-485	24 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE			DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		TRUE	4						19.305 mm		27 ns
TUSB6020ZQER	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1				GENERAL PURPOSE		STANDARD	3.3 V				GRID ARRAY, VERY THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			1	TIN SILVER COPPER	BOTTOM	S-PBGA-B80	3	1 mm		5 mm	Not Qualified			1	IT ALSO NEED 1.5V DIGITAL CORE SUPPLY VOLTAGE	NO	e1	30	260	5 mm		0 ns
SN75140PSRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		BIPOLAR		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V		5		SMALL OUTLINE	SOP8,.3		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel				NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm		5.3 mm	Not Qualified	16 Amp		2		NO	e4	30	260	6.2 mm		35 ns
SN75ALS056DWRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	8		BIPOLAR	19 ns	IEEE 896		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm		7.5 mm	Not Qualified			8		NO	e4	30	260	12.8 mm		18 ns
THS6093CPWPR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	14 V	2	2			GENERAL PURPOSE	10.5 mA	DIFFERENTIAL	5 V	7 V	12	-5 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP14,.25	2.5 V	Line Driver or Receivers		5 V	.65 mm	70 Cel	5 V	DIFFERENTIAL	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	2	1.2 mm	.275 A	4.4 mm	Not Qualified		COMPLEMENTARY		ALSO OPERATES AT 5V TO 14V SINGLE SUPPLY; LOW POWER SHUTDOWN MODE AVAILABLE	NO	e4	30	260	5 mm		0 ns
SN75LBC175ADG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BICMOS		EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	9.9 mm		16 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.