COMMERCIAL Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75LVDS180D	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1		6 ns	EIA-644; TIA-644	12 mA	DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e4			8.65 mm	.247 V	6 ns
SN75130N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR	45 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel			0 Cel	4		DUAL	R-PDIP-T16									NO					2.96 V
SN75ALS181NSLE-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR	20 ns	V.11; X.27; EIA-422-A; EIA-485	30 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				10.2 mm		25 ns
SN75ALS171J-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1	BIPOLAR	13 ns	V.11; X.27; X3.131; EIA-422-A; EIA-485	90 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	3		DUAL	R-GDIP-T20		5.08 mm	7.62 mm	Not Qualified		TRUE	3	COMMON I/O; ADDITIONAL COMMON ENABLE INPUT	YES				24.195 mm		19 ns
MC1489ANSLE	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.05 V	1	BIPOLAR		V.28; EIA-232-E	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.95 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL			NOT SPECIFIED	NOT SPECIFIED	10.2 mm		85 ns
SN75154D	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		EIA-232-E; TIA-232-E; V.28	35 mA	SCHMITT TRIGGER	5 V	13.2 V	5/12		SMALL OUTLINE	SOP16,.25	10.8 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	INVERTED	4	OPTIONAL +12V SUPPLY; RESPONSE CONTROL	NO	e4	NOT SPECIFIED	260	9.9 mm		0 ns
GD75232N	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3	BIPOLAR	175 ns	EIA-232-F; TIA-232-F; V.28	25 mA	SCHMITT TRIGGER	5 V	15 V	5,+-7.5/+-15	-9 V	IN-LINE	DIP20,.3	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	70 Cel	9 V	OPEN-COLLECTOR	0 Cel	3	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T20		5.08 mm	7.62 mm	Not Qualified	.01 Amp	TRUE	5	EASY INTERFACE BETWEEN UART, SERIAL-PORT CONNECTOR OF IBM PC/AT	NO	e4	NOT SPECIFIED	NOT SPECIFIED	25.4 mm	12 V	150 ns
SN74LS2323DG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2	TTL		GENERAL PURPOSE		GATED	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	24 Amp		1		NO	e4	30	260	4.9 mm		35 ns
DS8922N	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2		15 ns	EIA-422; ESDI; ST412; ST506		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel			0 Cel	2		DUAL	R-PDIP-T16		5.08 mm	7.62 mm				2		YES				19.305 mm		22.5 ns
TRS232NE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2			EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	3.2 Amp		2		NO	e4			19.305 mm	10 V	0 ns
SN75C3221EDBR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP16,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	1	ALSO OPERATES AT 5V SUPPLY	NO	e4	NOT SPECIFIED	260	6.2 mm	10 V	0 ns
UA9636ACPE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	13.2 V	2	BIPOLAR	140000 ns	EIA-232-E; TIA-232-E; V.10; V.28; EIA-423-B; TIA-423-B	18 mA	STANDARD	12 V	13.2 V	+-12	-12 V	IN-LINE	DIP8,.3	10.8 V	Line Driver or Receivers	.00001 Amp	10.8 V	2.54 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	8 V	0 ns
SN75ALS170DW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3	BIPOLAR	13 ns	EIA-422-B; TIA-422-B; EIA-485; V.11	90 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	8 Amp	TRUE	3	COMMON I/O	YES	e4	30	260	12.8 mm	1.5 V	19 ns
SN74ACT1284DB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	7		20 ns	IEEE 1284		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH					4.7 V	.65 mm	70 Cel			0 Cel	7	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified			7		NO	e4			7.2 mm		20 ns
SN75129J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR			53 mA		5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T20					16 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
MC3487DE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR	20 ns	EIA-422-B; TIA-422-B; V.11	85 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY			YES	e4	NOT SPECIFIED	260	9.9 mm	2 V	0 ns
5962-01-129-4187	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR			60 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel			0 Cel	1		DUAL	R-XDIP-T16				Not Qualified	15 Amp				YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
SN75122N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR			72 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T16					16 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
TRSF3232CDR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	1.6 Amp		2	ALSO OPERATED AT 5V SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	10 V	0 ns
SN75189NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR			26 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					10 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN74ACT1284NSRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		20 ns	IEEE-1284		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.7 V	1.27 mm	70 Cel			0 Cel	7	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified			4		NO	e4	30	260	12.6 mm		20 ns
SN75LBC172DW	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BICMOS	20 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		SMALL OUTLINE	SOP20,.4	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	.06 Amp	COMPLEMENTARY			YES	e4	30	260	12.8 mm	1.5 V	0 ns
MC3487N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR	20 ns	EIA-422-A; FED STD 1020	85 mA	STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm
SN75ALS170ADWRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3	BIPOLAR	10.5 ns	EIA-422-B; TIA-422-B; EIA-485; V.11	90 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	8 Amp	TRUE	3	COMMON I/O	YES	e4	30	260	12.8 mm	1.5 V	16.5 ns
MC1489NE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	BIPOLAR		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	.0083 Amp	4.5 V	2.54 mm	70 Cel	5 V	OPEN-COLLECTOR	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm		85 ns
SN75146P	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		EIA-232-E; V.28; EIA-422-B; EIA-423-B; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	20 Amp	TRUE	2				NOT SPECIFIED	NOT SPECIFIED	9.81 mm		300 ns
TRS3243CPWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	5		150 ns	EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP28,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	5	ALSO OPERATES AT 5V	NO	e4	30	260	9.7 mm	10 V	150 ns
TRSF3222ECDBR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		2		NO	e4	30	260	7.2 mm	10 V	0 ns
SN75178BJG	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR			70 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel			0 Cel	1		DUAL	R-XDIP-T8				Not Qualified	8 Amp				YES					1.5 V	40 ns
SN75LVDS9637D	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			EIA-644; TIA-644	10 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers		3 V	1.27 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	2		NO	e4	30	260	4.9 mm		6 ns
MAX3386ECDWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			EIA-232; TIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel			0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2		NO	e4	30	260	12.8 mm	10 V	150 ns
SN75126N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.95 V	2	BIPOLAR	37 ns	IBM 360/370	80 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		OPEN-EMITTER	0 Cel	2		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE		INDIVIDUAL FAULT FLAGS	NO				19.305 mm
SN75970B1DGGR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9		17.7 ns	X3.131; X3.277; EIA-485; SCSI-2; SCSI-3; ISO 8482		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.5 mm	70 Cel			0 Cel	9	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	1.2 mm	6.1 mm	Not Qualified			9		YES	e4			14 mm		18 ns
SN75141D-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified		INVERTED	2						4.9 mm		35 ns
SN75189DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers	.0083 Amp	4.5 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4	NOT SPECIFIED	260	8.65 mm		85 ns
SN75140PSLE-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR		GENERAL PURPOSE	35 mA	DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	S-PDSO-G8		2 mm	5.3 mm	Not Qualified		INVERTED	2						6.2 mm		35 ns
DS9637ACMWC	Texas Instruments	LINE RECEIVER	COMMERCIAL	NO LEAD		DIE	UNSPECIFIED	UNSPECIFIED	YES	5.25 V	2	BIPOLAR		EIA-422; EIA-423; MIL-STD-188-114		DIFFERENTIAL SCHMITT TRIGGER	5 V				UNCASED CHIP					4.75 V		70 Cel			0 Cel			UPPER	X-XUUC-N				Not Qualified			2								25 ns
SN75ALS199N-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR		V.10; V.11; X.26; X.27		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	2						19.305 mm		22 ns
TRS3237ECDW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3			EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel			0 Cel	5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1 Amp		3	ALSO OPERATES AT 5V	NO	e4	30	260	17.9 mm	10 V	0 ns
SN75LVDT386DGGG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	64	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	16	CMOS		EIA-644; TIA-644	70 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP64,.32,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	70 Cel	3.3 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G64	2	1.2 mm	6.1 mm	Not Qualified	8 Amp	TRUE	16		NO	e4	30	260	17 mm		4 ns
SN75ALS165DW-00R	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	8	TTL	20 ns	IEEE-488		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified			1		NO				12.8 mm		14 ns
SN75189DRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4	30	260	8.65 mm		85 ns
DS36C278M	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	CMOS	80 ns	EIA-422-B; TIA-442-B; EIA-485	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.000002 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	1	TIN LEAD	DUAL	R-PDSO-G8	1	1.753 mm	3.9 mm	Not Qualified	4 Amp		1		YES	e0	20	235	4.9 mm	1.5 V	400 ns
AM26LS31CDNOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR	20 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	4		DUAL	R-PDSO-G16		1.75 mm	3.9 mm						YES				9.9 mm
SN75LVDS82CDGGR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1			EIA-644		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH						.5 mm	70 Cel			0 Cel			DUAL	R-PDSO-G56		1.2 mm	6.1 mm	Not Qualified			5						14 mm
DS90CR486VSX/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	100	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.46 V	8	CMOS		EIA-644; TIA-644	340 mA	DIFFERENTIAL	3.3 V	3.46 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP100,.63SQ	3.14 V	Line Driver or Receivers	.00001 Amp	3.14 V	.5 mm	70 Cel	3.3 V	3-STATE	-10 Cel		Matte Tin (Sn)	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified		TRUE	9		NO	e3	NOT SPECIFIED	260	14 mm		0 ns
TRS3243ECRHBRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	32	HVQCCN	SQUARE	PLASTIC/EPOXY	YES	3.6 V	3			EIA-232-F; TIA-232-F	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC32,.2SQ,20	3 V	Line Driver or Receivers	.00001 Amp	3 V	.5 mm	70 Cel	3.3 V		0 Cel	3	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-N32	2	1 mm	5 mm	Not Qualified	.001 Amp	TRUE	5		NO	e4	30	260	5 mm	10 V	0 ns
SN75179AD	Texas Instruments		COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			BIPOLAR			50 mA		5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp		1.27 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G8				Not Qualified	8 Amp				YES					1.5 V	35 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.