COMMERCIAL Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
LMS202ECMWX	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2			EIA-232-E; TIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G16	2A	2.65 mm	7.5 mm	Not Qualified	3.2 Amp		2		NO	e0	30	220	10.3 mm	10 V	1000 ns
TSB21LV03CIPM	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	3	CMOS		IEEE 1394	175 mA	DIFFERENTIAL SCHMITT TRIGGER	3 V		3/3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20		Line Driver or Receivers		2.7 V	.5 mm	70 Cel			0 Cel	6		QUAD	S-PQFP-G64		1.6 mm	10 mm	Not Qualified	12 Amp		6		YES		NOT SPECIFIED	NOT SPECIFIED	10 mm	.17 V	0 ns
TSB41LV02PAP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1			IEEE 1394		DIFFERENTIAL	3.3 V				FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	4		QUAD	S-PQFP-G64		1.2 mm	10 mm	Not Qualified			4		YES				10 mm		0 ns
DS99R105VSX/NOPB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e3	30	260	7 mm		0 ns
N8T23D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR	25 ns	IBM 360	60 mA	GATED	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel		OPEN-EMITTER	0 Cel	2		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE			NO		NOT SPECIFIED	NOT SPECIFIED	9.9 mm	1.5 V	0 ns
TSB41AB2PAPR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4			IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	4	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	9 Amp	COMPLEMENTARY	4		YES	e4	30	260	10 mm	.172 V	0 ns
TSB41LV02APAP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4	CMOS	11 ns	IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP64,.47SQ		Line Driver or Receivers	.000005 Amp	3 V	.5 mm	70 Cel			0 Cel	4		QUAD	S-PQFP-G64		1.2 mm	10 mm	Not Qualified	4 Amp		4		YES		NOT SPECIFIED	NOT SPECIFIED	10 mm	.172 V	0 ns
N8T14N	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	3	BIPOLAR		GENERAL PURPOSE	100 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp		3				NOT SPECIFIED	NOT SPECIFIED	19.305 mm		30 ns
UC5172N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	8	BIPOLAR		EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	IN-LINE	DIP28,.6		Line Driver or Receivers	.00004 Amp	9 V	2.54 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDIP-T28				Not Qualified					NO					9 V	0 ns
TL145406DWRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BIPOLAR	500 ns	EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V	15 V	5,+-7.5/+-15	-9 V	SMALL OUTLINE	SOP16,.4	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel	9 V	TOTEM-POLE	0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	10 Amp	INVERTED	3		NO	e4	30	260	10.3 mm	12 V	425 ns
MAXT3243DW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			EIA-232-F; V.28		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel	3		DUAL	R-PDSO-G28		2.65 mm	7.5 mm	Not Qualified			5		NO				17.9 mm
TSB41BA3PFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6			IEEE 1394		DIFFERENTIAL	3.3 V		1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel	6		QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified	4 Amp		6		YES		NOT SPECIFIED	NOT SPECIFIED	12 mm	.172 V	0 ns
TSB41LV06PZP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	100	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	12			IEEE 1394	450 mA	DIFFERENTIAL	3.3 V		3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP100,.63SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel	12		QUAD	S-PQFP-G100		1.2 mm	14 mm	Not Qualified	4 Amp		12		YES				14 mm	.172 V	0 ns
TSB41LV03APFPG4	Texas Instruments		COMMERCIAL	GULL WING	80	QFP	SQUARE	PLASTIC	YES			CMOS					3.3 V		3.3		FLATPACK	TQFP80,.55SQ		Line Driver or Receivers			.5 mm	70 Cel			0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3			Not Qualified	4 Amp				YES	e4	30	260		.172 V	12 ns
DS99R105VS	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	1	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e0			7 mm
DS99R105SQX/NOPB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1	CMOS			95 mA		3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	3-STATE	0 Cel	1	MATTE TIN	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified		TRUE			YES	e3	30	260	7 mm		0 ns
LMS1487CM	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		60 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel	1	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G8	1	1.753 mm	3.899 mm	Not Qualified	4 Amp		1		YES	e0	30	235	4.902 mm	1.5 V	200 ns
TSB11C01DLR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			IEEE 1394	140 mA	DIFFERENTIAL	5 V		5		SMALL OUTLINE, SHRINK PITCH	SSOP56,.4		Line Driver or Receivers		4.75 V	.635 mm	70 Cel			0 Cel	6		DUAL	R-PDSO-G56		2.79 mm	7.5 mm	Not Qualified	12 Amp		6		YES		NOT SPECIFIED	NOT SPECIFIED	18.415 mm		0 ns
DS99R106SQX	Texas Instruments	LINE RECEIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS		GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	70 Cel			0 Cel	1	TIN LEAD	QUAD	S-XQCC-N48	2	.8 mm	7 mm	Not Qualified			1		YES	e0			7 mm
TSB81BA3DPFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6	CMOS		IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	70 Cel	3.3 V		0 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6		YES	e4	NOT SPECIFIED	260	12 mm	.172 V	0 ns
MAXT3221DB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1			EIA-232-F; V.28		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G16		2 mm	5.3 mm	Not Qualified			1		NO				6.2 mm		0 ns
N8T14DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3	BIPOLAR		GENERAL PURPOSE		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified			3						9.9 mm		30 ns
74LVCE161284DLG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13		30 ns	IEEE-1284		STANDARD	3.3 V				SMALL OUTLINE, SHRINK PITCH					3 V	.635 mm	70 Cel			0 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	2.79 mm	7.49 mm	Not Qualified			13		NO	e4	30	260	15.875 mm		18 ns
TSB14C01APMG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	5.25 V	2	CMOS		IEEE 1394		STANDARD	5 V		5		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20		Line Driver or Receivers		4.5 V	.5 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.6 mm	10 mm	Not Qualified	24 Amp		2		NO	e4	30	260	10 mm		0 ns
TSB41LV04APFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8	CMOS		IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		8		YES	e4	30	260	12 mm	2.4 V	0 ns
DS3487M	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	BIPOLAR	15 ns	EIA-422		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel		3-STATE	0 Cel	4	TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e0	20	235	9.9 mm	2 V	0 ns
TSB21LV03CPM	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	3	CMOS		IEEE 1394	175 mA	DIFFERENTIAL SCHMITT TRIGGER	3 V		3/3.3		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20		Line Driver or Receivers		2.7 V	.5 mm	70 Cel			0 Cel	6		QUAD	S-PQFP-G64		1.6 mm	10 mm	Not Qualified	12 Amp		6		YES		NOT SPECIFIED	NOT SPECIFIED	10 mm	.17 V	0 ns
DS99R105SQ	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS		GENERAL PURPOSE		DIFFERENTIAL	3.3 V				CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE					3 V	.5 mm	70 Cel			0 Cel	1	TIN LEAD	QUAD	S-XQCC-N48	2	.8 mm	7 mm	Not Qualified			1		YES	e0			7 mm
74LVCE161284DGGRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13		30 ns	IEEE-1284		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	70 Cel			0 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified			13		NO	e4	30	260	12.5 mm		18 ns
DS3884VF	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES	5.5 V	6		7.5 ns	IEEE 1194.1		STANDARD	5 V				FLATPACK					4.5 V		70 Cel			0 Cel	6		QUAD	S-PQFP-G44							6		NO						8 ns
UC5171N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	8	BIPOLAR		EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	IN-LINE	DIP28,.6		Line Driver or Receivers	.00004 Amp	9 V	2.54 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDIP-T28				Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED		9 V	0 ns
N8T13N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR	25 ns	IBM 360	60 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-EMITTER	0 Cel	1		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE			NO				19.305 mm
UC5180CQTR	Texas Instruments	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	8	BIPOLAR		EIA232-E; EIA422-A; EIA423-A; V.10; V.11; V.28; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified	8 Amp		8		NO	e4	30	260	11.505 mm		550 ns
74LVCE161284DGGRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13		30 ns	IEEE-1284		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	70 Cel			0 Cel	14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified			13		NO	e4	30	260	12.5 mm		18 ns
TSB41AB1ZQE-64	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	BALL	64	VFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	CMOS		IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3/3.3		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA80,9X9,20	3 V	Line Driver or Receivers	.000005 Amp	3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	2	TIN SILVER COPPER	BOTTOM	S-PBGA-B64	3	1 mm	5 mm	Not Qualified	.005 Amp	COMPLEMENTARY	2		YES	e1	30	260	5 mm	.172 V	0 ns
UC5180CJ	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	8	BIPOLAR		EIA232-E; EIA422-A; EIA423-A; V.10; V.11; V.28; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel			0 Cel			DUAL	R-GDIP-T28		5.08 mm	7.62 mm	Not Qualified	8 Amp		8		NO		NOT SPECIFIED	NOT SPECIFIED			550 ns
SNSNYLVDSZQLR	Texas Instruments	LINE DRIVER	COMMERCIAL	BALL	56	VFBGA	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	5			GENERAL PURPOSE		STANDARD	3.3 V	3.6 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH		3 V			3 V	.65 mm	70 Cel	3.3 V		-10 Cel	5	TIN SILVER COPPER	BOTTOM	R-PBGA-B56	2	1 mm	4.5 mm						YES	e1	30	260	7 mm
TL145406DWE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BIPOLAR	500 ns	EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V	15 V	5,+-7.5/+-15	-9 V	SMALL OUTLINE	SOP16,.4	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel	9 V	TOTEM-POLE	0 Cel	3	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	10 Amp	INVERTED	3		NO	e4	NOT SPECIFIED	260	10.3 mm	12 V	425 ns
N8T14D	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3	BIPOLAR		GENERAL PURPOSE	100 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified	16 Amp		3				NOT SPECIFIED	NOT SPECIFIED	9.9 mm		30 ns
DS99R102VSX/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES			CMOS			85 mA		3.3 V		3.3		FLATPACK	TQFP48,.35SQ		Line Driver or Receivers			.5 mm	70 Cel			0 Cel		MATTE TIN	QUAD	S-PQFP-G48	3			Not Qualified						e3	30	260			0 ns
TSB81BA3DPFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6	CMOS		IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
N8T14N-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		GENERAL PURPOSE	100 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	3						19.305 mm		30 ns
THS7102CVFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	32	HLQFP	SQUARE	PLASTIC/EPOXY	YES	16 V	1			GENERAL PURPOSE		DIFFERENTIAL	15 V		15		FLATPACK, HEAT SINK/SLUG, LOW PROFILE	QFP32,.35SQ,32		Line Driver or Receivers		7.5 V	.8 mm	70 Cel			0 Cel	1		QUAD	S-PQFP-G32		1.6 mm	7 mm	Not Qualified			1		YES		NOT SPECIFIED	NOT SPECIFIED	7 mm		0 ns
TL145406DWRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BIPOLAR	500 ns	EIA-232-F; TIA-232-F; V.28	25 mA	SCHMITT TRIGGER	5 V	15 V	5,+-7.5/+-15	-9 V	SMALL OUTLINE	SOP16,.4	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel	9 V		0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	10 Amp		3		NO	e4	30	260	10.3 mm	12 V	425 ns
TSB41AB3PFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6	CMOS		IEEE 1394	1 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers	.000001 Amp	3 V	.5 mm	70 Cel	3.3 V		0 Cel	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6		YES	e4	30	260	12 mm	.172 V	0 ns
DS99R106VS/NOPB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	3-STATE	0 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		TRUE	1		YES	e3	30	260	7 mm		0 ns
TL3695P	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	TTL	22 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8	1	5.08 mm	7.62 mm	Not Qualified	16 Amp	COMPLEMENTARY	1	TRISTATABLE RECEIVER; COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4			9.81 mm	1.5 V	37 ns
N8T23D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR	25 ns	IBM 360	60 mA	GATED	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		OPEN-EMITTER	0 Cel	1		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE			NO				9.9 mm

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.