COMMERCIAL Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	No. of Bits	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
N8T23N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		25 ns	IBM 360	60 mA	GATED	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel		OPEN-EMITTER	2		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE			NO		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	1.5 V	0 ns
UC5170CJ	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	15 V	8	CMOS			EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V			-10 V	IN-LINE					9 V	2.54 mm	70 Cel			8		DUAL	R-GDIP-T28		4.91 mm	15.24 mm	Not Qualified					NO				36.83 mm
TSB41AB1PHPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	CMOS			IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3/3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		2	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			2		YES	e4	30	260	7 mm	.172 V	0 ns
DS3487MX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		15 ns	EIA-422		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00005 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.753 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm	2 V	0 ns
DS3884V	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	44	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.5 V	6			7.5 ns	IEEE 1194.1		STANDARD	5 V				CHIP CARRIER					4.5 V		70 Cel			6		QUAD	S-PQCC-J44							6		NO						8 ns
UC5170CQTR	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8	CMOS			EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	8	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified					NO	e4	30	260	11.505 mm	9 V	0 ns
TL145406DWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BIPOLAR		500 ns	EIA-232-F; TIA-232-F; V.28	25 mA	SCHMITT TRIGGER	5 V	15 V	5,+-7.5/+-15	-9 V	SMALL OUTLINE	SOP16,.4	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel	9 V		3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	10 Amp		3		NO	e4	30	260	10.3 mm	12 V	425 ns
UC5180CN	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	28	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	7 V	8	BIPOLAR			EIA232-E; EIA422-A; EIA423-A; V.10; V.11; V.28; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP28,.6		Line Driver or Receivers		3 V	2.54 mm	70 Cel					DUAL	R-PDIP-T28				Not Qualified	8 Amp		1		NO						550 ns
DS3897M	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4			15 ns	GENERAL PURPOSE		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			4		DUAL	R-PDSO-G20		2.642 mm	7.493 mm				4		NO				12.8 mm		18 ns
UC5170CQ	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8	CMOS			EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	8	NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified					NO	e4	30	260	11.505 mm	9 V	0 ns
UC5181CQ	Texas Instruments	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	8	BIPOLAR			EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel				NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified	8 Amp		8		NO	e4	30	260	11.505 mm		120 ns
LMS1485MX	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BICMOS		20 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27	2.2 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			1	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G8	1	1.753 mm	3.899 mm	Not Qualified	4 Amp		1		YES	e0	30	235	4.902 mm	1.5 V	55 ns
TSB41AB1PAPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	CMOS			IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3/3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	2	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified		COMPLEMENTARY	2		YES	e4	30	260	10 mm	.172 V	0 ns
74LVC161284DLRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		40 ns	IEEE 1284		SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.635 mm	70 Cel	5 V		8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	2.79 mm	7.5 mm	Not Qualified			8	CONTAINS 5 DRIVERS, 4 RECEIVERS AND EIGHT BI-DIRECTIONAL LINES	NO	e4	30	260	15.875 mm		40 ns
74LVCE161284VRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13			30 ns	IEEE-1284		STANDARD	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.4 mm	70 Cel			14	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	4.4 mm	Not Qualified			13		NO	e4	30	260	9.7 mm		18 ns
DS99R102VSX	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			1	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e0			7 mm
UC5181CQTR	Texas Instruments	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	8	BIPOLAR			EIA-232-E; V.10; V.11; V.28; X.26; X.27; EIA-422-A; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel					QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified	8 Amp		8		NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm		120 ns
DS99R105VSX	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS			GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			1	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e0			7 mm
TL3695DRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	TTL		22 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP8,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V		1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	16 Amp		1	TRISTATABLE RECEIVER; COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4	30	260	4.9 mm	1.5 V	37 ns
TL3695P-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		22 ns	V.11; X.27; EIA-422-A; EIA-485	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	1		DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				9.81 mm		37 ns
ECL2530N	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			ECL										IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel					DUAL	R-PDIP-T16				Not Qualified
DS3862WM	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		8	BIPOLAR		20 ns	GENERAL PURPOSE	135 mA	STANDARD					SMALL OUTLINE						1.27 mm	70 Cel		OPEN-COLLECTOR	8	Tin/Lead (Sn/Pb)	DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified		INVERTED	8		NO	e0			12.8 mm		25 ns
TSB41AB3PFPEP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6				IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80		1.2 mm	12 mm	Not Qualified			6		YES	e4			12 mm
TSB41LV06APZP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	100	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	12				IEEE 1394		DIFFERENTIAL	3.3 V	3.6 V			FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH		3 V			3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	12	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified		COMPLEMENTARY	12		YES	e4	NOT SPECIFIED	260	14 mm		0 ns
TSB41LV02	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	QFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4			11 ns	IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V				FLATPACK					3 V		70 Cel			1		QUAD	S-PQFP-G64				Not Qualified			1		YES						0 ns
TSB81BA3PFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6	CMOS			IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	70 Cel	3.3 V		6	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6		YES	e4	NOT SPECIFIED	260	12 mm	.172 V	0 ns
DS99R102VS/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1	CMOS				85 mA		3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	3-STATE		MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		TRUE	1		NO	e3	30	260	7 mm		0 ns
TSB41AB1PHP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	CMOS			IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3/3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		2	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			2		YES	e4	30	260	7 mm	.172 V	0 ns
TL145406IN	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3	BIPOLAR		500 ns	EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V	15 V	5,+-7.5/+-15	-9 V	IN-LINE	DIP16,.3	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	70 Cel	9 V		3		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	10 Amp		3		NO		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	12 V	425 ns
TSB41LV06APZPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	100	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	12				IEEE 1394		DIFFERENTIAL	3.3 V	3.6 V			FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH		3 V			3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	12	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G100	3	1.2 mm	14 mm	Not Qualified		COMPLEMENTARY	12		YES	e4	30	260	14 mm		0 ns
DS3896N	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	8			15 ns	GENERAL PURPOSE		STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			8		DUAL	R-PDIP-T20		5.08 mm	7.62 mm				8		NO				26.075 mm		18 ns
THS7102CGQE	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	15.75 V	1				GENERAL PURPOSE		DIFFERENTIAL	15 V				GRID ARRAY, VERY THIN PROFILE, FINE PITCH					14.25 V	.5 mm	70 Cel			1		BOTTOM	S-PBGA-B80		1 mm	5 mm	Not Qualified			1		YES				5 mm		0 ns
DS3884AVF	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	44	QFP	SQUARE	PLASTIC/EPOXY	YES		6			5 ns	IEEE 1194.1		STANDARD					FLATPACK						.8 mm	70 Cel			6	Tin/Lead (Sn/Pb)	QUAD	S-PQFP-G44		2.1 mm	10 mm	Not Qualified			6		NO	e0			10 mm		6 ns
TSB41LV02A	Texas Instruments		COMMERCIAL	GULL WING	64	QFP	SQUARE	PLASTIC/EPOXY	YES			CMOS						3.3 V		3.3		FLATPACK	TQFP64,.47SQ		Line Driver or Receivers	.000005 Amp		.5 mm	70 Cel			4		QUAD	S-PQFP-G64				Not Qualified	4 Amp				YES					.172 V	11 ns
LMS75LBC176MX	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			25 ns	EIA-485; TIA-485; ISO 8482	8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel			1	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G8	1	1.753 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e0	30	235	4.902 mm	1.5 V	33 ns
TSB41AB3PFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	6	CMOS			IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
THS7103CVFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	32	HLQFP	SQUARE	PLASTIC/EPOXY	YES	16 V	1				GENERAL PURPOSE		DIFFERENTIAL	15 V				FLATPACK, HEAT SINK/SLUG, LOW PROFILE					7.5 V	.8 mm	70 Cel			1		QUAD	S-PQFP-G32		1.6 mm	7 mm	Not Qualified			1		YES				7 mm		0 ns
DS3862J	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO		8	BIPOLAR		20 ns	GENERAL PURPOSE	135 mA	STANDARD					IN-LINE						2.54 mm	70 Cel		OPEN-COLLECTOR	8	Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T20		5.08 mm	7.62 mm	Not Qualified		INVERTED	8		NO	e0			24.51 mm		25 ns
MAXT3238PW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1				EIA-232-F; V.28		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.65 mm	70 Cel			5		DUAL	R-PDSO-G28		1.2 mm	4.4 mm	Not Qualified			3		NO				9.7 mm		0 ns
N8T14D-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR			GENERAL PURPOSE	100 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE	3						9.9 mm		30 ns
LMS75LBC176M	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1			25 ns	EIA-485; TIA-485; ISO 8482	8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel			1	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G8	1	1.753 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e0	30	235	4.902 mm	1.5 V	33 ns
TSB81BA3EPFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES		3	CMOS				150 mA			3.6 V	1.8,3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	DIFFERENTIAL	6	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e4	30	260	12 mm	.172 V	0 ns
DS3897N	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4			15 ns	GENERAL PURPOSE		STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			4		DUAL	R-PDIP-T20		5.08 mm	7.62 mm				4		NO				26.075 mm		18 ns
LMS202CMX	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2				EIA-232-E; TIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			2	TIN LEAD	DUAL	R-PDSO-G16	1	1.753 mm	3.899 mm	Not Qualified	3.2 Amp		2		NO	e0		235	9.902 mm	10 V	1000 ns
SN003232CPWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES							1 mA				3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.000001 Amp		.635 mm	70 Cel			2	MATTE TIN	DUAL	R-PDSO-G16	1			Not Qualified	1.6 Amp				NO	e3	30	260		10 V	0 ns
74LVCE161284DLRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	13		19	30 ns	IEEE-1284	45 mA	STANDARD	3.3 V	5.5 V			SMALL OUTLINE, SHRINK PITCH		3 V			3 V	.635 mm	70 Cel	5 V	3-STATE	14	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G48	1	2.79 mm	7.49 mm	Not Qualified	84 Amp	TRUE	13		NO	e4	NOT SPECIFIED	260	15.875 mm		18 ns
UC5172QTR	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8	BIPOLAR			EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	1		QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm	9 V	0 ns
TSB14C01APMR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES	5.25 V	2	CMOS			IEEE 1394		STANDARD	5 V		5		FLATPACK, LOW PROFILE, FINE PITCH	QFP64,.47SQ,20		Line Driver or Receivers		4.5 V	.5 mm	70 Cel			2	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.6 mm	10 mm	Not Qualified	24 Amp		2		NO	e4	30	260	10 mm		0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.