COMMERCIAL Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	No. of Channels	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Nominal Output Peak Current Limit	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS8820AD-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		BIPOLAR		GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		TOTEM-POLE			DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		TRUE	1	BUILT-IN LINE TERMINATION; RESPONSE CONTROL					8.65 mm		45 ns
DS8830DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR	16 ns	GENERAL PURPOSE	36 mA	GATED	5 V				SMALL OUTLINE					4.75 V		70 Cel		TOTEM-POLE	2		DUAL	R-PDSO-G14					Not Qualified		COMPLEMENTARY			YES						0 ns
DS8830N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR	16 ns	GENERAL PURPOSE	36 mA	GATED	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers	.00012 Amp	4.75 V	2.54 mm	70 Cel		TOTEM-POLE	2		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	1.3 V	0 ns
DS8820AD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2		BIPOLAR		GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE			DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified	16 Amp	TRUE	1	BUILT-IN LINE TERMINATION; RESPONSE CONTROL			NOT SPECIFIED	NOT SPECIFIED	8.65 mm		45 ns
DS8820AN	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR		GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE			DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified	16 Amp	TRUE	2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	19.18 mm		45 ns
DS8820AJ/A+	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR			14 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel				Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T14						16 Amp					e0					45 ns
DS8830D	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR	16 ns	GENERAL PURPOSE	36 mA	GATED	5 V		5		SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00012 Amp	4.75 V	1.27 mm	70 Cel		TOTEM-POLE	2		DUAL	R-PDSO-G14					Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED		1.4 V	0 ns
DS8830N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR	16 ns	GENERAL PURPOSE	36 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	1		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm		0 ns
DS8830N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR	16 ns	GENERAL PURPOSE	36 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	1		DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm		0 ns
DS8832N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR	25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		3-STATE	2		DUAL	R-PDIP-T16										YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
DS8820AN-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2		BIPOLAR		GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE			DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		TRUE	1	BUILT-IN LINE TERMINATION; RESPONSE CONTROL					19.305 mm		45 ns
DS8832J	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO	5.25 V	2		BIPOLAR	25 ns	GENERAL PURPOSE		GATED	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	2		DUAL	R-XDIP-T16		5.08 mm		7.62 mm	Not Qualified				LG_MAX	YES		NOT SPECIFIED	NOT SPECIFIED	19.94 mm	2 V	0 ns
DS8820AJ	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR			14 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel					DUAL	R-XDIP-T14					Not Qualified	16 Amp										45 ns
DS8831N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR	25 ns	GENERAL PURPOSE		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	1		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified				CONFIGURABLE INTERFACE STANDARDS; INDIVIDUAL ENABLES	YES		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	2 V	0 ns
DS8820AN-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2		BIPOLAR		GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE			DUAL	R-PDIP-T14		5.08 mm		7.62 mm	Not Qualified		TRUE	1	BUILT-IN LINE TERMINATION; RESPONSE CONTROL					19.305 mm		45 ns
DS7838J	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4			25 ns			GATED SCHMITT TRIGGER	5 V				IN-LINE	DIP16(UNSPEC)				4.75 V		70 Cel			4		DUAL	R-PDIP-T16						16 Amp	TRUE	4		NO						30 ns
DS8838M	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4			25 ns			SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			4		DUAL	R-PDSO-G16		1.753 mm		3.899 mm				4		NO				9.902 mm		30 ns
DS8830N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR	18 ns				5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers	.00012 Amp		2.54 mm	70 Cel			2		DUAL	R-PDIP-T14										YES					1.3 V
DS8838N	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4						SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			4		DUAL	R-PDIP-T16		5.08 mm		7.62 mm				4		NO				21.755 mm
DS8831N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR	25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		3-STATE	2		DUAL	R-PDIP-T16										YES					2 V
DS8830D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR	16 ns	GENERAL PURPOSE	36 mA	GATED	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	1		DUAL	R-PDSO-G14		1.75 mm		3.9 mm	Not Qualified		COMPLEMENTARY			YES				8.65 mm		0 ns
DS8832D	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES				BIPOLAR	25 ns				5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00004 Amp		1.27 mm	70 Cel		3-STATE	2		DUAL	R-PDSO-G16					Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
DS8832J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR	25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		3-STATE	2		DUAL	R-XDIP-T16										YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
DS8832NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR	25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		3-STATE	2		DUAL	R-PDIP-T16										YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
DS8832N	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR	25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		3-STATE	2		DUAL	R-PDIP-T16					Not Qualified					YES					2 V
SN75123NE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR	25 ns	IBM 360		GATED	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel		OPEN-EMITTER	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified					NO	e4			19.305 mm	2.75 V	0 ns
SN75138NSRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR	24 ns	GENERAL PURPOSE	65 mA	STANDARD	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	1.27 mm	70 Cel			4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified	16 Amp		4	COMMON I/O	NO	e4	30	260	10.2 mm	2 V	15 ns
SN75172NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR	120 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel		3-STATE	4		DUAL	R-PDIP-T16										YES		NOT SPECIFIED	NOT SPECIFIED		1.5 V	0 ns
SN75189AJP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO				BIPOLAR			26 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel					DUAL	R-XDIP-T14						10 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
THS6052CDDA	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	HLSOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V	15 V	+-5/+-15	-12 V	SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE	SOP8,.25	5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	12 V		2	Matte Tin (Sn)	DUAL	R-PDSO-G8	1	1.68 mm	.175 A	3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO	e3	NOT SPECIFIED	260	4.89 mm		0 ns
MAX208CDW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4			10000 ns	EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP24,.4	4.5 V	Line Driver or Receivers	.0002 Amp	4.5 V	1.27 mm	70 Cel	5 V		4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G24	1	2.65 mm		7.5 mm	Not Qualified	1.6 Amp	INVERTED	4		NO	e4	30	260	15.4 mm	10 V	10000 ns
5962-01-147-8995	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR	15 ns				5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		CONSTANT-CURRENT	2		DUAL	R-PDIP-T14					Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75121NSRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2		BIPOLAR	50 ns	GENERAL PURPOSE		GATED	5 V		5		SMALL OUTLINE	SOP16,.3		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		OPEN-EMITTER	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm		5.3 mm	Not Qualified					NO	e4	30	260	10.2 mm	2.4 V	0 ns
SN75LBC172NE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BICMOS	20 ns	EIA-485		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified					YES	e4			19.305 mm	1.5 V	0 ns
SN75208NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR			30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel					DUAL	R-PDIP-T14						16 Amp										35 ns
LMH0202MTX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.465 V	2				GENERAL PURPOSE		DIFFERENTIAL	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers		3.135 V	.65 mm	70 Cel			2	MATTE TIN	DUAL	R-PDSO-G16	1	1.2 mm		4.4 mm	Not Qualified					YES	e3	30	260	5 mm	.75 V	0 ns
SN75970B2DGGR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9			15.7 ns	X3.131; X3.277; EIA-485; SCSI-2; SCSI-3; ISO 8482		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					4.75 V	.5 mm	70 Cel			9		DUAL	R-PDSO-G56		1.2 mm		6.1 mm	Not Qualified			9		YES		NOT SPECIFIED	NOT SPECIFIED	14 mm		14.6 ns
SN75C1406DWRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	3		BIMOS	3500 ns	EIA-232-F; TIA-232-F; V.28	.45 mA	SCHMITT TRIGGER	5 V	15 V	5,+-5/+-12	-12 V	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm		7.5 mm	Not Qualified	.001 Amp	INVERTED	3		NO	e4	30	260	10.3 mm	4 V	4000 ns
SN75110AJ	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	2		BIPOLAR	15 ns	V.35		GATED	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel		CONSTANT-CURRENT	2		DUAL	R-GDIP-T14		5.08 mm		7.62 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	19.56 mm		0 ns
SN75173DRE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4		BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485-A; TIA-485-A	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel		3-STATE		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm		3.9 mm	Not Qualified	16 Amp	TRUE	4		NO	e4	30	260	9.9 mm		35 ns
MAX3318CDB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3 V	2				EIA-232	2 mA	SCHMITT TRIGGER	2.5 V	3 V	2.25/3		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	2.25 V	Line Driver or Receivers		2.25 V	.65 mm	70 Cel	2.5 V		2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2 mm		5.3 mm	Not Qualified		TRUE	2		NO	e4	30	260	7.2 mm	7.4 V	0 ns
MAX3238CDBRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3		BIPOLAR		EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V	5.5 V	3.3,5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	4.5 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	5 V		5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2 mm		5.3 mm	Not Qualified	.001 Amp	INVERTED	3	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e4	30	260	10.2 mm	10 V	0 ns
SN75157P3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				BIPOLAR			50 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers			2.54 mm	70 Cel					DUAL	R-PDIP-T8						20 Amp										25 ns
SN75ALS121N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR	50 ns	GENERAL PURPOSE	30 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-EMITTER	1		DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified		TRUE			NO				19.305 mm
AM26S10CN	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4		BIPOLAR	15 ns	GENERAL PURPOSE	80 mA	STANDARD	5 V	5.25 V			IN-LINE		4.75 V		.000003 Amp	4.75 V	2.54 mm	70 Cel	5 V	OPEN-COLLECTOR	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm		7.62 mm	Not Qualified	100 Amp	INVERTED	4	COMMON I/O	NO	e4			19.305 mm	2.7 V	15 ns
SN75151N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO				TTL	30 ns				5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel		3-STATE	4		DUAL	R-PDIP-T20										YES					2 V
SN75C3223EDBG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2		BIPOLAR		EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel			2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2 mm		5.3 mm	Not Qualified	1.6 Amp		2	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	7.2 mm	10 V	0 ns
SN75ALS085NT	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2		BIPOLAR	15 ns	IEEE 802.3		DIFFERENTIAL	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			2		DUAL	R-PDIP-T24		5.08 mm		7.62 mm	Not Qualified			2		YES		NOT SPECIFIED	NOT SPECIFIED	31.64 mm		15 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.