COMMERCIAL Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	No. of Bits	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
LMS1487CMX	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				60 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27	.5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel	1	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G8	1	1.753 mm	3.899 mm	Not Qualified	4 Amp		1		YES	e0	30	235	4.902 mm	1.5 V	200 ns
TSB41AB1ZQER-64	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	BALL	64	VFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2					IEEE 1394A-2000; IEEE 1394-1995		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V			GRID ARRAY, VERY THIN PROFILE, FINE PITCH		3 V			3 V	.5 mm	70 Cel	3.3 V		0 Cel	2	TIN SILVER COPPER	BOTTOM	S-PBGA-B64	3	1 mm	5 mm				2		YES	e1	30	260	5 mm
74LVC161284DGGRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1	CMOS		19	40 ns	IEEE 1284	45 mA	SCHMITT TRIGGER	3.3 V	5.5 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH		3 V			3 V	.5 mm	70 Cel	5 V	3-STATE	0 Cel	8	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G48	1	1.2 mm	6.1 mm	Not Qualified	84 Amp	TRUE	8	CONTAINS 5 DRIVERS, 4 RECEIVERS AND EIGHT BI-DIRECTIONAL LINES	NO	e4	30	260	12.5 mm		40 ns
TSB14C01HV	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	FLAT	68	QFF	SQUARE	CERAMIC, GLASS-SEALED	YES		1												FLATPACK						.635 mm							QUAD	S-GQFP-F68		3.912 mm	12.51 mm	Not Qualified									12.51 mm
N8T13D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR			25 ns	IBM 360	60 mA	GATED	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		OPEN-EMITTER	0 Cel	1		DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		TRUE			NO				9.9 mm
N8T13N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR			25 ns	IBM 360	60 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		OPEN-EMITTER	0 Cel	1		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE			NO				19.305 mm
TSB81BA3PFPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	2.05 V	6	CMOS				IEEE 1394		DIFFERENTIAL	1.95 V	3.6 V	3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ	3 V	Line Driver or Receivers		1.85 V	.5 mm	70 Cel	3.3 V		0 Cel	6	Nickel/Palladium/Gold (Ni/Pd/Au)	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		6		YES	e4	NOT SPECIFIED	260	12 mm	.172 V	0 ns
LMS202CM	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2					EIA-232-E; TIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.753 mm	3.899 mm	Not Qualified	3.2 Amp		2		NO	e0		235	9.902 mm	3.1 V	1000 ns
9615CJ	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR					50 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T16				Not Qualified	15 Amp										75 ns
DS99R105SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS				GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	3-STATE	0 Cel	1	MATTE TIN	QUAD	S-XQCC-N48	2	.8 mm	7 mm	Not Qualified		TRUE	1		YES	e3	30	260	7 mm		0 ns
DS3486MX/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR				EIA-422; EIA-423	85 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		MATTE TIN	DUAL	R-PDSO-G16	1	1.753 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e3	30	260	9.9 mm		35 ns
DS99R101VSX/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	QFP	SQUARE	PLASTIC/EPOXY	YES								95 mA		3.3 V		3.3		FLATPACK	TQFP48,.35SQ		Line Driver or Receivers			.5 mm	70 Cel			0 Cel		MATTE TIN	QUAD	S-PQFP-G48	3			Not Qualified						e3	30	260			0 ns
TSB41AB1PAP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	CMOS				IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3/3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		0 Cel	2	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified			2		YES	e4	30	260	10 mm	.172 V	0 ns
UC5171Q	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8	BIPOLAR				EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		QUAD	S-PQCC-J28		4.57 mm	11.505 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	11.505 mm	9 V	0 ns
MAXT3238DB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1					EIA-232-F; V.28		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE, SHRINK PITCH					3 V	.65 mm	70 Cel			0 Cel	5		DUAL	R-PDSO-G28		2 mm	5.3 mm	Not Qualified			3		NO				10.2 mm		0 ns
TL145406DWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BIPOLAR			500 ns	EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V	15 V	5,+-7.5/+-15	-9 V	SMALL OUTLINE	SOP16,.4	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel	9 V	TOTEM-POLE	0 Cel	3	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	10 Amp	INVERTED	3		NO	e4	NOT SPECIFIED	260	10.3 mm	12 V	425 ns
TSB81BA3EZAJ	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	BALL	168	FBGA	SQUARE	PLASTIC/EPOXY	YES		3	CMOS					150 mA			3.6 V	1.8,3.3		GRID ARRAY, FINE PITCH	BGA168,13X13,20	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	6	TIN SILVER COPPER	BOTTOM	S-PBGA-B168	3	1.2 mm	7 mm	Not Qualified	4 Amp	COMPLEMENTARY	6		YES	e1	30	260	7 mm	.172 V	0 ns
SNJ55182W	Texas Instruments	LINE RECEIVER	COMMERCIAL	FLAT	14	DFP	RECTANGULAR	CERAMIC, GLASS-SEALED	YES	5.5 V	2	BIPOLAR	MIL-PRF-38535			GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V		5		FLATPACK	FL14,.3		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDFP-F14		2.03 mm	6.285 mm	Not Qualified	16 Amp	TRUE	2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	9.21 mm		45 ns
LMS202ECMW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2					EIA-232-E; TIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G16	2A	2.65 mm	7.5 mm	Not Qualified	3.2 Amp		2		NO	e0	30	220	10.3 mm	10 V	1000 ns
TL145406NE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	3	BIPOLAR			500 ns	EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V	15 V	5,+-7.5/+-15	-9 V	IN-LINE	DIP16,.3	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	70 Cel	9 V	TOTEM-POLE	0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	10 Amp	INVERTED	3		NO	e4			19.305 mm	12 V	425 ns
UC5180CQ	Texas Instruments	LINE RECEIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	7 V	8	BIPOLAR				EIA232-E; EIA422-A; EIA423-A; V.10; V.11; V.28; X.26; X.27	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers		3 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	QUAD	S-PQCC-J28	3	4.57 mm	11.505 mm	Not Qualified	8 Amp		1		NO	e4	30	260	11.505 mm		550 ns
THS7103CGQE	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	15.75 V	1					GENERAL PURPOSE		DIFFERENTIAL	15 V				GRID ARRAY, VERY THIN PROFILE, FINE PITCH					14.25 V	.5 mm	70 Cel			0 Cel	1		BOTTOM	S-PBGA-B80		1 mm	5 mm	Not Qualified			1		YES				5 mm		0 ns
DS99R101VS/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES		1						95 mA		3.3 V	3.6 V	3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	3-STATE	0 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified		TRUE			YES	e3	30	260	7 mm		0 ns
TL3695D-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR			22 ns	V.11; X.27; EIA-422-A; EIA-485	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				4.9 mm		37 ns
TL145406IDW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3	BIPOLAR			500 ns	EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V	15 V	5,+-7.5/+-15	-9 V	SMALL OUTLINE	SOP16,.4	7.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel	9 V		0 Cel	3		DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified	10 Amp		3		NO		NOT SPECIFIED	NOT SPECIFIED	10.3 mm	12 V	425 ns
TSB41LV04APFP	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	80	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	8	CMOS				IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP80,.55SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel	8	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G80	3	1.2 mm	12 mm	Not Qualified	4 Amp		8		YES	e4	30	260	12 mm	2.4 V	0 ns
TL3695DRE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	TTL			22 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel		3-STATE	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	COMPLEMENTARY	1	TRISTATABLE RECEIVER; COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4	30	260	4.9 mm	1.5 V	37 ns
HPA02272DGGR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES			CMOS							3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP56,.3,20		Line Driver or Receivers			.5 mm	70 Cel			-10 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2			Not Qualified						e4	30	260
DS3486MX	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	BIPOLAR				EIA-422; EIA-423	85 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers			1.27 mm	70 Cel			0 Cel		TIN LEAD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		4			e0	20	235	9.9 mm		35 ns
UC5172Q	Texas Instruments	LINE DRIVER	COMMERCIAL	J BEND	28	QCCJ	SQUARE	PLASTIC/EPOXY	YES	15 V	8	BIPOLAR				EIA232-E; EIA423-A; V.10; V.28; X.26		STANDARD	10 V		+-10	-10 V	CHIP CARRIER	LDCC28,.5SQ		Line Driver or Receivers	.00004 Amp	9 V	1.27 mm	70 Cel		3-STATE	0 Cel	1	TIN LEAD	QUAD	S-PQCC-J28	2	4.57 mm	11.505 mm	Not Qualified					NO	e0			11.505 mm	9 V	0 ns
DS3896M	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	8				15 ns	GENERAL PURPOSE		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	8		DUAL	R-PDSO-G20		2.642 mm	7.493 mm				8		NO				12.8 mm		18 ns
DS99R102VS	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS				GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	1	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e0			7 mm
N8T14N-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR				GENERAL PURPOSE	100 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	3						19.305 mm		30 ns
LMS202ECM	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	2					EIA-232-E; TIA-232-E; V.28	7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDSO-G16	1	1.753 mm	3.899 mm	Not Qualified	3.2 Amp		2		NO	e0	20	235	9.902 mm	3.1 V	1000 ns
DS99R106VSX/NOPB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS				GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V		3.3		FLATPACK, THIN PROFILE, FINE PITCH	TQFP48,.35SQ		Line Driver or Receivers		3 V	.5 mm	70 Cel			0 Cel	1	MATTE TIN	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e3	30	260	7 mm		0 ns
N8T23J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR			35 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		OPEN-EMITTER	0 Cel	2		DUAL	R-XDIP-T16				Not Qualified					NO					2.75 V
DS99R106SQ/NOPB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE	UNSPECIFIED	YES	3.6 V	1	CMOS				GENERAL PURPOSE	95 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	3-STATE	0 Cel	1	MATTE TIN	QUAD	S-XQCC-N48	2	.8 mm	7 mm	Not Qualified		TRUE	1		YES	e3	30	260	7 mm		0 ns
TSB14C01PM	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	LFQFP	SQUARE	PLASTIC/EPOXY	YES		1												FLATPACK, LOW PROFILE, FINE PITCH						.5 mm							QUAD	S-PQFP-G64		1.6 mm	10 mm	Not Qualified							NOT SPECIFIED	NOT SPECIFIED	10 mm
LMS75ALS176AM	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1				14 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A	8 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	1	Tin/Lead (Sn85Pb15)	DUAL	R-PDSO-G8	1	1.753 mm	3.9 mm	Not Qualified	8 Amp		1		YES	e0	30	235	4.902 mm	1.5 V	30 ns
TSB41AB2PAPG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	64	HTFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	4	CMOS				IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH	TQFP64,.47SQ	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	4	NICKEL PALLADIUM GOLD	QUAD	S-PQFP-G64	3	1.2 mm	10 mm	Not Qualified	9 Amp	COMPLEMENTARY	4		YES	e4	30	260	10 mm	.172 V	0 ns
DS99R106VSX	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TFQFP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS				GENERAL PURPOSE		DIFFERENTIAL	3.3 V				FLATPACK, THIN PROFILE, FINE PITCH					3 V	.5 mm	70 Cel			0 Cel	1	TIN LEAD	QUAD	S-PQFP-G48	3	1.2 mm	7 mm	Not Qualified			1		YES	e0			7 mm
MAXT3221DW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1					EIA-232-F; V.28		SCHMITT TRIGGER	3.3 V				SMALL OUTLINE					3 V	1.27 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G16		2.65 mm	7.5 mm	Not Qualified			1		NO				10.3 mm		0 ns
TSB41AB1GQE	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	BALL	80	VFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	CMOS				IEEE 1394		DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3/3.3		GRID ARRAY, VERY THIN PROFILE, FINE PITCH	BGA80,9X9,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	2	TIN LEAD	BOTTOM	S-PBGA-B80	2A	1 mm	5 mm	Not Qualified		COMPLEMENTARY	2		YES	e0	20	235	5 mm	.172 V	0 ns
TL3695PE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	TTL			22 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	16 Amp	COMPLEMENTARY	1	TRISTATABLE RECEIVER; COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4			9.81 mm	1.5 V	37 ns
DS99R106SQX/NOPB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD	48	HVQCCN	SQUARE	PLASTIC/EPOXY	YES		1	CMOS					95 mA		3.3 V	3.6 V	3.3		CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	LCC48,.27SQ,20	3 V	Line Driver or Receivers			.5 mm	70 Cel	3.3 V	3-STATE	0 Cel		MATTE TIN	QUAD	S-PQCC-N48	2	.8 mm	7 mm	Not Qualified		TRUE	1		NO	e3	30	260	7 mm		0 ns
DS3487M/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES		4	BIPOLAR			15 ns	EIA-422		STANDARD	5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers	.00005 Amp		1.27 mm	70 Cel		3-STATE	0 Cel	4	MATTE TIN	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified					YES	e3	30	260	9.9 mm	2 V	0 ns
DS88C20N/A+	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			CMOS									5/15		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T14					1.6 Amp					e0					150 ns
DS8832JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR			25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-XDIP-T16									YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.