COMMERCIAL Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
DS90CR287SLC	Texas Instruments	LINE DRIVER	COMMERCIAL	BALL	64	LFBGA	SQUARE	PLASTIC/EPOXY	YES	3.6 V	1	CMOS	1.5 ns	EIA-644; TIA-644		STANDARD	3.3 V				GRID ARRAY, LOW PROFILE, FINE PITCH					3 V	.8 mm	70 Cel			-10 Cel	4		BOTTOM	S-PBGA-B64	3	1.5 mm	8 mm	Not Qualified					YES		20	235	8 mm
SN75C189ADBE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4	BIPOLAR		EIA-232-F; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH					4.5 V	.65 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified			4		NO	e4	30	260	6.2 mm		6000 ns
SN75110ANSRE4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR	15 ns	V.35		GATED	5 V		+-5	-5 V	SMALL OUTLINE	SOP14,.3		Line Driver or Receivers	.00008 Amp	4.75 V	1.27 mm	70 Cel		CONSTANT-CURRENT	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified					YES	e4	30	260	10.2 mm		0 ns
SN75207D-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT					8.65 mm		35 ns
SN75C1154DW-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	1	BIMOS	3500 ns	EIA-232-D	.6 mA	SCHMITT TRIGGER	5 V	15 V		-12 V	SMALL OUTLINE		4.5 V			4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	4		DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified		INVERTED	4		NO				12.8 mm		4000 ns
DS90CR218AMTDX/NOPB	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		EIA-644; TIA-644	115 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP48,.3,20	3 V	Line Driver or Receivers		3 V	.5 mm	70 Cel	3.3 V		-10 Cel		MATTE TIN	DUAL	R-PDSO-G48	2	1.2 mm	6.1 mm	Not Qualified		TRUE	4		YES	e3	30	260	12.5 mm		0 ns
SN75ALS126N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			TTL	34 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel			0 Cel	4		DUAL	R-PDIP-T16									NO					2.96 V
SN75C189ADRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4	BIPOLAR		EIA-232-F; TIA-232-F; V.28	.7 mA	SCHMITT TRIGGER	5 V	6 V	5		SMALL OUTLINE	SOP14,.25	4.5 V	Line Driver or Receivers		4.5 V	1.27 mm	70 Cel	5 V	TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL	NO	e4	30	260	8.65 mm		6000 ns
SN75174N3	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR	65 ns	V.11; X.27; EIA-422-A; EIA-485	60 mA	STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	1.5 V	0 ns
SN75LBC174ANR	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BICMOS	11 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T16				Not Qualified					YES					1 V
SN75125J-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	1	BIPOLAR		IBM 360/370	47 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		INVERTED	7						19.56 mm		30 ns
SN75C3222EPW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	BIPOLAR		EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	TRUE	2	ALSO OPERATES AT 5V SUPPLY	NO	e4	NOT SPECIFIED	260	6.5 mm	10 V	0 ns
TRS213CDWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4			EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP28,.4		Line Driver or Receivers	.00001 Amp	4.5 V	1.27 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		5	ALSO OPERATES AT 5V	NO	e4	30	260	17.9 mm	10 V	10000 ns
SN75ALS195D	Texas Instruments		COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES			TTL			35 mA		5 V		5		SMALL OUTLINE	SOP16,.25		Line Driver or Receivers			1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G16				Not Qualified	16 Amp										22 ns
MC3486DG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	85 mA	DIFFERENTIAL	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	9.9 mm		35 ns
SN75150D-00	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	1	BIPOLAR		EIA-232-C	22 mA	STANDARD	12 V			-12 V	SMALL OUTLINE					10.8 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO				4.9 mm		0 ns
MC1489DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL	NO				8.65 mm		85 ns
TRS208CNT	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	24	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4			EIA-232-F; TIA-232-F; V.28	20 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP24,.3		Line Driver or Receivers	.0002 Amp	4.5 V	2.54 mm	70 Cel			0 Cel	4		DUAL	R-PDIP-T24		5.08 mm	7.62 mm	Not Qualified	1.6 Amp		4		NO				31.64 mm	10 V	10000 ns
SN75C3222EPWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	BIPOLAR		EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp		2	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	6.5 mm	10 V	0 ns
TRS3318CPWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3 V	2			EIA-232	2 mA	SCHMITT TRIGGER	2.5 V		2.25/3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		2.25 V	.65 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G20		1.2 mm	4.4 mm	Not Qualified	.5 Amp		2		NO		NOT SPECIFIED	NOT SPECIFIED	6.5 mm	7.4 V	0 ns
THS6053CD	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	16.5 V	2	BIPOLAR		GENERAL PURPOSE		DIFFERENTIAL	12 V		+-5/+-15	-12 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G14		1.75 mm	3.9 mm	Not Qualified				ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	8.65 mm		0 ns
SN75C3222PWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	2	CAN ALSO OPERATE WITH A 5V SUPPLY	NO	e4	30	260	6.5 mm	10 V	0 ns
SN75ALS085DWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR	15 ns	IEEE 802.3		DIFFERENTIAL	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G24		2.65 mm	7.5 mm	Not Qualified			2		YES		NOT SPECIFIED	NOT SPECIFIED	15.4 mm		15 ns
SN75ALS057DWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR	19 ns	IEEE 896		STANDARD	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified			4		NO	e4	30	260	12.8 mm		18 ns
SN75LBC175ANE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BICMOS		EIA-422; TIA-422; EIA-485; TIA-485; ISO 8482	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	8 Amp		4		NO	e4			19.305 mm		16 ns
TRSF3232CPW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G16		1.2 mm	4.4 mm	Not Qualified	1.6 Amp		2	ALSO OPERATED AT 5V SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	5 mm	10 V	0 ns
SN75130N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.95 V	1	BIPOLAR	37 ns	IBM 360/370	85 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		OPEN-EMITTER	0 Cel	4		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY		TOTEM-POLE INVERTED OUTPUT; COMMON FAULT FLAG	NO				19.305 mm		0 ns
SN74ACT1284DWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4		20 ns	IEEE-1284		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.7 V	1.27 mm	70 Cel			0 Cel	7	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified			4		NO	e4	30	260	12.8 mm		20 ns
SN75C1406DWE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	3	BIMOS	3500 ns	EIA-232-F; TIA-232-F; V.28	.45 mA	SCHMITT TRIGGER	5 V	15 V	5,+-5/+-12	-12 V	SMALL OUTLINE	SOP16,.4	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	3.2 Amp	INVERTED	3		NO	e4	30	260	10.3 mm	8 V	4000 ns
SN75188JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR	350 ns				9 V		+-9	-9 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00001 Amp		2.54 mm	70 Cel			0 Cel	4		DUAL	R-XDIP-T14									NO					12 V
SN75LBC175DRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BICMOS		V.11; EIA-422-A; EIA-423-A; EIA-485	20 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers		4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	16 Amp	TRUE	2		NO	e4	30	260	9.9 mm		30 ns
SN75ALS057N-10	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	TTL	18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	1		DUAL	R-PDIP-T20		5.08 mm	7.62 mm	Not Qualified			1		NO				24.325 mm		18 ns
SN75188J/BURNIN	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR	350 ns				9 V		+-9	-9 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00001 Amp		2.54 mm	70 Cel			0 Cel	4		DUAL	R-XDIP-T14									NO					12 V
SN75188DG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	4	BIPOLAR	350 ns	EIA-232-E; TIA-232-E; V.28		GATED	9 V		+-9	-9 V	SMALL OUTLINE	SOP14,.25		Line Driver or Receivers	.00001 Amp	7.5 V	1.27 mm	70 Cel			0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	1.75 mm	3.9 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e4	30	260	8.65 mm	12 V	0 ns
SN75121NE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR	50 ns	GENERAL PURPOSE		GATED	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel		OPEN-EMITTER	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified					NO	e4			19.305 mm	2.4 V	0 ns
SN75162BN	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	22	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR	20 ns	IEEE-488	110 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	8		DUAL	R-PDIP-T22		5.08 mm	7.62 mm	Not Qualified		TRUE	8		NO		NOT SPECIFIED	NOT SPECIFIED			22 ns
SN75LBC174N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BICMOS	20 ns	EIA-485	7 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	.06 Amp	COMPLEMENTARY			YES	e4			19.305 mm	1.5 V	0 ns
SN75LVDS9638DGKRG4	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	TSSOP	SQUARE	PLASTIC/EPOXY	YES	3.6 V	2	CMOS	6 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP8,.19		Line Driver or Receivers	.00002 Amp	3 V	.65 mm	70 Cel		3-STATE	0 Cel	2		DUAL	S-PDSO-G8		1.1 mm	3 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	3 mm	.247 V	0 ns
SN75C198N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	1	BIMOS	3500 ns	EIA-232-D	.16 mA	GATED	12 V			-12 V	IN-LINE					4.5 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED		2 SINGLE INPUT DRIVERS	NO				19.305 mm
TRS3222ECDW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP20,.4	3 V	Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel	3.3 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	2	ALSO OPERATES AT 5V SUPPLY	NO	e4	NOT SPECIFIED	260	12.8 mm	10 V	0 ns
SN75C1154DWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	4	BIMOS	3500 ns	EIA-232-F; TIA-232-F; V.28	.6 mA	SCHMITT TRIGGER	5 V	15 V	5,+-5/+-12	-12 V	SMALL OUTLINE	SOP20,.4	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	1.27 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified	.001 Amp	INVERTED	4		NO	e4	30	260	12.8 mm	8 V	4000 ns
SN75LBC776DWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BICMOS	75 ns	EIA-422-B; EIA-423-B; APPLETALK	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified	2 Amp	COMPLEMENTARY	3		YES		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	4 V	75 ns
SN75126J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.95 V	2	BIPOLAR	37 ns	IBM 360/370	80 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		OPEN-EMITTER	0 Cel	2		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE		INDIVIDUAL FAULT FLAGS	NO				19.56 mm
MAX3222CPW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS		EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	2	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	6.5 mm	10 V	0 ns
SN75174N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR	65 ns	V.11; X.27; EIA-422-A; EIA-485	60 mA	STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm
DS75161AN	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	8		20 ns	IEEE-488		SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	8		DUAL	R-PDIP-T20		5.08 mm	7.62 mm				8		NO				26.075 mm		20 ns
TRS3318ECPWRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3 V	2		175 ns	EIA-232	2 mA	SCHMITT TRIGGER	2.5 V		2.25/3		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25		Line Driver or Receivers		2.25 V	.65 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	.5 Amp		2		NO	e4	30	260	6.5 mm	7.4 V	175 ns
SN75136N-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR	24 ns	GENERAL PURPOSE	87 mA	STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		INVERTED	4	TRISTATABLE RECEIVERS; COMMON I/O	NO				19.305 mm		18 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.