COMMERCIAL Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75118NS	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1		30 ns			DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified			1		YES	e4	30	260	10.2 mm		75 ns
UA9637ACPSE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2			V.10; V.11; EIA-422-B; EIA-423-B		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm	5.3 mm	Not Qualified			2			e4	30	260	6.2 mm		25 ns
SN75LBC771DWRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BICMOS	75 ns	EIA-422-B; EIA-423-B; APPLETALK	10 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		+-5	-5 V	SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		4.75 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified	2 Amp	COMPLEMENTARY	3		YES		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	4 V	75 ns
MAX3238CDBE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	BIPOLAR		EIA-232-F; TIA-232-F; V.28	2 mA	SCHMITT TRIGGER	3.3 V	5.5 V	3.3,5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	4.5 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	5 V		0 Cel	5	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp		3	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e4	30	260	10.2 mm	10 V	0 ns
SN75C189ANSLE	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	6 V	1	BIPOLAR		EIA-232-E; V.28	.7 mA	SCHMITT TRIGGER	5 V		5		SMALL OUTLINE	SOP14,.3		Line Driver or Receivers		4.5 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G14		2 mm	5.3 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL			NOT SPECIFIED	NOT SPECIFIED	10.2 mm		6000 ns
MAX3222CDB	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS		EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP20,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G20	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	2	ALSO OPERATES AT 5V SUPPLY	NO	e4	NOT SPECIFIED	260	7.2 mm	10 V	0 ns
SN75ALS175NS	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified			1			e4	30	260	10.2 mm		27 ns
SN75179BPSE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1		22 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm	5.3 mm	Not Qualified			1		YES	e4	30	260	6.2 mm		40 ns
DS14185MWA	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	NO LEAD		DIE	UNSPECIFIED	UNSPECIFIED	YES	5.25 V	3	BIPOLAR	350 ns	EIA-232-E; TIA-232-E		STANDARD	5 V	13.2 V		-12 V	UNCASED CHIP		9 V			4.75 V		70 Cel	12 V		0 Cel	3		UPPER	X-XUUC-N				Not Qualified			5		NO						350 ns
SN75124N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR			72 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T16					16 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75ALS193NE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		V.10; V.11; EIA-422-B; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.0004 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	4		NO	e4			19.305 mm		22 ns
SN751701PSE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	15 V	1	BIPOLAR	480 ns	EIA-232-C; TIA-232-C		SCHMITT TRIGGER	12 V			-12 V	SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			-20 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	2 mm	5.3 mm	Not Qualified			1		NO	e4	30	260	6.2 mm		240 ns
UA9637ACD-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	1	BIPOLAR		EIA-422-A; EIA-423-A; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified		TRUE	2						4.9 mm		25 ns
SN75115D-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	2	BIPOLAR		GENERAL PURPOSE	50 mA	DIFFERENTIAL	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel			DUAL	R-PDSO-G16		1.75 mm	3.9 mm	Not Qualified		INVERTED	1	CONFIGURABLE TOTEM-POLE OUTPUTS					9.9 mm		75 ns
TRS3386ECDWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	3			EIA-232; TIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3/5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers		3 V	1.27 mm	70 Cel			0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	2.65 mm	7.5 mm	Not Qualified			2		NO	e4	30	260	12.8 mm	10 V	0 ns
DS90LV027M/NOPB	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS	6 ns	EIA-644	11 mA	STANDARD	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP8,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel	3.3 V	DIFFERENTIAL	0 Cel	2	MATTE TIN	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	.01 Amp	COMPLEMENTARY			YES	e3	30	260	4.9 mm	.25 V	0 ns
SN75164BN-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	22	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	8	TTL	20 ns	IEEE-488		SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	1		DUAL	R-PDIP-T22		5.08 mm	10.16 mm	Not Qualified			1		NO						22 ns
SN75475JG4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR			50 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T8					20 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75207JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR			30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14					16 Amp										35 ns
SN75LVDS86CDGGR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	48	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1			GENERAL PURPOSE			3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH						.5 mm	70 Cel			0 Cel			DUAL	R-PDSO-G48		1.2 mm	6.1 mm	Not Qualified									12.5 mm
MC3453FK	Texas Instruments	LINE DRIVER	COMMERCIAL	NO LEAD	20	QCCN	SQUARE	CERAMIC, METAL-SEALED COFIRED	YES	5.25 V	4		15 ns	GENERAL PURPOSE		STANDARD	5 V			-5 V	CHIP CARRIER					4.5 V	1.27 mm	70 Cel			0 Cel	4		QUAD	S-CQCC-N20		2.03 mm	8.89 mm	Not Qualified					YES				8.89 mm		0 ns
SN75LVDM977CDL	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES		9			SCSI		DIFFERENTIAL					SMALL OUTLINE, SHRINK PITCH						.635 mm	70 Cel			0 Cel	1		DUAL	R-PDSO-G56		2.79 mm	7.5 mm	Not Qualified			1		YES				18.415 mm
TRS3223CDWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP20,.4		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2	ALSO OPERATES AT 5V SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	10 V	0 ns
DS36954VX	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	J BEND	20	QCCJ	SQUARE	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR	19 ns	EIA-485	90 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		CHIP CARRIER	LDCC20,.4SQ		Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel			0 Cel	4	TIN LEAD	QUAD	S-PQCC-J20	2A	4.57 mm	8.89 mm	Not Qualified	4 Amp		4	COMMON I/O; 4 RECEIVERS ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVERS; INDIVIDUAL DRIVER ENABLES	YES	e0		250	8.89 mm	1.5 V	19 ns
DS90CR288MTD	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	56	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	1			EIA-644; TIA-644		DIFFERENTIAL	3.3 V				SMALL OUTLINE, THIN PROFILE, SHRINK PITCH					3 V	.5 mm	70 Cel			-10 Cel			DUAL	R-PDSO-G56		1.1 mm	6.1 mm				28		NO				14 mm
TRS3222ECPWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G20	1	1.2 mm	4.4 mm	Not Qualified	1.6 Amp	INVERTED	2	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	6.5 mm	10 V	0 ns
SN75HVD11PE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	3.6 V	1	BICMOS	40 ns	EIA-485-A; TIA-485-A; ISO 8482	15.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		IN-LINE	DIP8,.3		Line Driver or Receivers	.0001 Amp	3 V	2.54 mm	70 Cel			0 Cel	1		DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	8 Amp		1	SIGNALING RATE 10 MBPS	YES		NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	70 ns
SN75189NSE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	14	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	4	BIPOLAR		EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G14	1	2 mm	5.3 mm	Not Qualified			4	RESPONSE CONTROL	NO	e4	30	260	10.2 mm		85 ns
SN75LVDS9638DR	Texas Instruments	LINE DRIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	CMOS	6 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		SMALL OUTLINE	SOP8,.25		Line Driver or Receivers	.00002 Amp	3 V	1.27 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	4.9 mm	.247 V	0 ns
AM26LS32ACJ-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	4	BIPOLAR		EIA-422-A; EIA-423-A		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	4						19.56 mm		35 ns
MAX3243CDBG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS	150 ns	EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE, SHRINK PITCH	SSOP28,.3	3 V	Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel	3.3 V		0 Cel	3	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	1	2 mm	5.3 mm	Not Qualified	1.6 Amp	INVERTED	5	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e4	NOT SPECIFIED	260	10.2 mm	5 V	150 ns
SN75970B1DLG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	56	SSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	9		17.7 ns	X3.131; X3.277; EIA-485; SCSI-2; SCSI-3; ISO 8482		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE, SHRINK PITCH					4.75 V	.635 mm	70 Cel			0 Cel	9	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G56	2	2.79 mm	7.49 mm	Not Qualified			9		YES	e4	30	260	18.415 mm		18 ns
SN75LP1185PWLE	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3	BIPOLAR	1600 ns	EIA-232-F; V.28		SCHMITT TRIGGER	5 V	15 V			SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP20,.25	9 V			4.75 V	.65 mm	70 Cel	12 V		0 Cel	3		DUAL	R-PDSO-G20		1.2 mm	4.4 mm	Not Qualified			5	ALSO REQUIRES -9 TO -15 SUPPLY	NO				6.5 mm		900 ns
SN75LVDT390DR	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	4	CMOS		EIA-644; TIA-644	18 mA	DIFFERENTIAL	3.3 V	3.6 V	3.3		SMALL OUTLINE	SOP16,.25	3 V	Line Driver or Receivers	.00001 Amp	3 V	1.27 mm	70 Cel	3.3 V		0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp		4		NO	e4	30	260	9.9 mm		4 ns
SN75LP196DWE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	20	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	3	BIPOLAR	1600 ns	EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V	15 V	5,+-9/+-12	-12 V	SMALL OUTLINE	SOP20,.4	9 V	Line Driver or Receivers	.000001 Amp	4.75 V	1.27 mm	70 Cel	12 V		0 Cel	5		DUAL	R-PDSO-G20		2.65 mm	7.5 mm	Not Qualified	2 Amp		3	ALSO REQUIRES -9 TO -15 SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	12.8 mm	10 V	900 ns
SN75124JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR			72 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T16					16 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75117D-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	BIPOLAR	30 ns	GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V				SMALL OUTLINE					4.5 V	1.27 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDSO-G8		1.75 mm	3.9 mm	Not Qualified		COMPLEMENTARY	1	COMMON I/O	YES				4.9 mm		75 ns
SN75164BN	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	22	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	8	BIPOLAR	35 ns	IEEE-488		SCHMITT TRIGGER	5 V				IN-LINE					4.75 V		70 Cel			0 Cel	8		DUAL	R-PDIP-T22				Not Qualified			8		NO		NOT SPECIFIED	NOT SPECIFIED			22 ns
MAX3243CDWRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	3	CMOS	150 ns	EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V	3.6 V	3.3/5		SMALL OUTLINE	SOP28,.4	3 V	Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel	3.3 V		0 Cel	3	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDSO-G28	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp	INVERTED	5	CAN ALSO OPERATE WITH 5V SUPPLY	NO	e4	NOT SPECIFIED	260	17.9 mm	5 V	150 ns
AM26LS33ACDRG4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		SMALL OUTLINE	SOP16,.25	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	1.27 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	TRUE	4		NO	e4	30	260	9.9 mm		35 ns
SN75151J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC	NO			TTL	30 ns				5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-XDIP-T20				Not Qualified					YES					2 V
SN75LBC784DWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	28	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	13.2 V	4	BICMOS	2700 ns	EIA-232; EIA-423-B	70 mA	DIFFERENTIAL SCHMITT TRIGGER	12 V		+-12	-12 V	SMALL OUTLINE	SOP28,.4		Line Driver or Receivers	.0001 Amp	10.8 V	1.27 mm	70 Cel			0 Cel	4		DUAL	R-PDSO-G28		2.65 mm	7.5 mm	Not Qualified	4 Amp		4		NO		NOT SPECIFIED	NOT SPECIFIED	17.9 mm	8 V	1000 ns
SN75C3232DWG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2	BIPOLAR		EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	10.3 mm	10 V	0 ns
AM26LS32ACNSE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.25 V	4	BIPOLAR		EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11		DIFFERENTIAL SCHMITT TRIGGER	5 V				SMALL OUTLINE					4.75 V	1.27 mm	70 Cel			0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2 mm	5.3 mm	Not Qualified			4			e4	30	260	10.2 mm		35 ns
SN75LPE1185CPWR	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	24	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES		1			EIA-232-F			5 V			-12 V	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH						.65 mm	70 Cel	12 V		0 Cel	1		DUAL	R-PDSO-G24		1.2 mm	4.4 mm	Not Qualified			1						7.8 mm
TRSF3232ECPW	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	TSSOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			EIA-232	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	TSSOP16,.25		Line Driver or Receivers	.000001 Amp	3 V	.65 mm	70 Cel			0 Cel	2		DUAL	R-PDSO-G16		1.2 mm	4.4 mm	Not Qualified	1.6 Amp		2		NO		NOT SPECIFIED	NOT SPECIFIED	5 mm	10 V	0 ns
SN75HVD3082ED	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	8	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	5.5 V	1	CMOS	1300 ns	EIA-485-A; TIA-485-A	.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		SMALL OUTLINE	SOP8,.25	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	1.27 mm	70 Cel	5 V	DIFFERENTIAL	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G8	1	1.75 mm	3.9 mm	Not Qualified	8 Amp	COMPLEMENTARY	1		YES	e4	30	260	4.9 mm	1.5 V	200 ns
TRS3232CDWRG4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	GULL WING	16	SOP	RECTANGULAR	PLASTIC/EPOXY	YES	3.6 V	2			EIA-232-F; TIA-232-F; V.28	1 mA	SCHMITT TRIGGER	3.3 V		3.3/5		SMALL OUTLINE	SOP16,.4		Line Driver or Receivers	.000001 Amp	3 V	1.27 mm	70 Cel			0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDSO-G16	1	2.65 mm	7.5 mm	Not Qualified	1.6 Amp		2	ALSO OPERATES AT 5V SUPPLY	NO	e4	30	260	10.3 mm	10 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.