THROUGH-HOLE Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SNC55141JG	Texas Instruments		MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR		CERAMIC	NO			BIPOLAR	MIL-STD-883 Class B (Modified)			35 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers			2.54 mm	125 Cel			-55 Cel			DUAL	R-XDIP-T8				Not Qualified	16 Amp										35 ns
MC3550J	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	1	BIPOLAR			GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	125 Cel		3-STATE	-55 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	4				NOT SPECIFIED	NOT SPECIFIED	19.56 mm		25 ns
TL3695PE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	1	TTL		22 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	16 Amp	COMPLEMENTARY	1	TRISTATABLE RECEIVER; COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4			9.81 mm	1.5 V	37 ns
SN55LVDS31J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	3.6 V	4	CMOS		4.5 ns	EIA-644; TIA-644		STANDARD	3.3 V		3.3		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	3 V	2.54 mm	125 Cel		3-STATE	-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	.247 V	0 ns
SN55173J	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, METAL-SEALED COFIRED	NO	5.5 V	4	BIPOLAR	MIL-PRF-38535		V.10; V.11; X.26; X.27; EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; EIA-485-A; TIA-485-A	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.00002 Amp	4.5 V	2.54 mm	125 Cel	5 V	3-STATE	-55 Cel		TIN LEAD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	.016 Amp	TRUE	4		NO	e0			19.56 mm		35 ns
SNJ55122J	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	1	BIPOLAR	38535Q/M;38534H;883B		GENERAL PURPOSE	100 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	125 Cel		TOTEM-POLE	-55 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	3				NOT SPECIFIED	NOT SPECIFIED	19.56 mm		30 ns
DS88C20N/A+	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO			CMOS								5/15		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel		Tin/Lead (Sn/Pb)	DUAL	R-PDIP-T14					1.6 Amp					e0					150 ns
DS8832JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC	NO			BIPOLAR		25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-XDIP-T16									YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
DS8830N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers	.00012 Amp	4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	1.3 V	0 ns
DS7820J/A+	Texas Instruments		MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC	NO			BIPOLAR				15 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	125 Cel			-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T14					3.5 Amp					e0
DS7831J/883B	Texas Instruments		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC	NO			BIPOLAR	MIL-STD-883 Class B (Modified)	25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	125 Cel		3-STATE	-55 Cel	2		DUAL	R-XDIP-T16				Not Qualified					YES					2 V
DS8820AN	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR			GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	2	BUILT-IN LINE TERMINATION; RESPONSE CONTROL	NO		NOT SPECIFIED	NOT SPECIFIED	19.18 mm		45 ns
DS8820AJ/A+	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC	NO			BIPOLAR				14 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel		Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T14					16 Amp					e0					45 ns
DS78C120J/883	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	15 V	2	BIPOLAR	MIL-STD-883		EIA-232-C; EIA-422; EIA-423; MIL-STD-188-114; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm				2	LG-MAX					19.94 mm		150 ns
DS7831J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC	NO	5.5 V	2	BIPOLAR		25 ns	GENERAL PURPOSE		GATED	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel	2		DUAL	R-XDIP-T16		5.08 mm	7.62 mm	Not Qualified				LG_MAX	YES		NOT SPECIFIED	NOT SPECIFIED	19.94 mm	2 V	0 ns
DS8830N-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	1		DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm		0 ns
DS8830N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR		16 ns	GENERAL PURPOSE	36 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	1		DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm		0 ns
DS8832N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO			BIPOLAR		25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDIP-T16									YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
DS8820AN-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	2	BIPOLAR			GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		TRUE	1	BUILT-IN LINE TERMINATION; RESPONSE CONTROL					19.305 mm		45 ns
DS8832J	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC	NO	5.25 V	2	BIPOLAR		25 ns	GENERAL PURPOSE		GATED	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-XDIP-T16		5.08 mm	7.62 mm	Not Qualified				LG_MAX	YES		NOT SPECIFIED	NOT SPECIFIED	19.94 mm	2 V	0 ns
DS7830J/883	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	2		MIL-STD-883	16 ns	GENERAL PURPOSE		GATED	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel	2		DUAL	R-GDIP-T14		5.08 mm	7.62 mm					LG-MAX	YES				19.939 mm
DS7832JB	Texas Instruments		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC	NO			BIPOLAR	38535Q/M;38534H;883B	25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	125 Cel		3-STATE	-55 Cel	2		DUAL	R-XDIP-T16				Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
DS8820AJ	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC	NO			BIPOLAR				14 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14				Not Qualified	16 Amp										45 ns
DS8831N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR		25 ns	GENERAL PURPOSE		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified				CONFIGURABLE INTERFACE STANDARDS; INDIVIDUAL ENABLES	YES		NOT SPECIFIED	NOT SPECIFIED	19.305 mm	2 V	0 ns
DS8820AN-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	2	BIPOLAR			GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		TRUE	1	BUILT-IN LINE TERMINATION; RESPONSE CONTROL					19.305 mm		45 ns
DS7831JB	Texas Instruments		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC	NO			BIPOLAR	38535Q/M;38534H;883B	25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	125 Cel		3-STATE	-55 Cel	2		DUAL	R-XDIP-T16				Not Qualified					YES					2 V
DS7838J	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4			25 ns			GATED SCHMITT TRIGGER	5 V				IN-LINE	DIP16(UNSPEC)				4.75 V		70 Cel			0 Cel	4		DUAL	R-PDIP-T16					16 Amp	TRUE	4		NO						30 ns
DS7832J/883B	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR	MIL-STD-883 Class B (Modified)	25 ns	GENERAL PURPOSE		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel	1		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified				CONFIGURABLE INTERFACE STANDARDS; INDIVIDUAL ENABLES	YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
DS7820AJ	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm				2	LG_MAX	NO				19.939 mm		45 ns
DS8830N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO			BIPOLAR		18 ns				5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers	.00012 Amp		2.54 mm	70 Cel			0 Cel	2		DUAL	R-PDIP-T14									YES					1.3 V
DS8838N	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4						SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	4		DUAL	R-PDIP-T16		5.08 mm	7.62 mm				4		NO				21.755 mm
DS7820AJ/883	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR			GENERAL PURPOSE		DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm				2	LG_MAX	NO				19.939 mm		45 ns
DS8831N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO			BIPOLAR		25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDIP-T16									YES					2 V
DS8832J4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC	NO			BIPOLAR		25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-XDIP-T16									YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
DS8832NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO			BIPOLAR		25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDIP-T16									YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
DS78LS120J/883	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, METAL-SEALED COFIRED	NO	5.5 V	2	BIPOLAR	38535Q/M;38534H;883B		EIA-232-C; EIA-422; EIA-423; FED STD 1020; FED STD 1030	16 mA	GATED SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers		4.5 V	2.54 mm	125 Cel	5 V	TOTEM-POLE	-55 Cel		TIN LEAD	DUAL	R-CDIP-T16	1	5.08 mm	7.62 mm	Not Qualified	4 Amp	TRUE	2	LG_MAX		e0			19.94 mm		0 ns
DS7832J	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC	NO			BIPOLAR		25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	125 Cel		3-STATE	-55 Cel	2		DUAL	R-XDIP-T16				Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
DS8832N	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO			BIPOLAR		25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-PDIP-T16				Not Qualified					YES					2 V
5962-8864801EA	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR	MIL-STD-883	22 ns	GENERAL PURPOSE		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.0001 Amp	4.5 V	2.54 mm	125 Cel		3-STATE	-55 Cel	1	TIN LEAD	DUAL	R-GDIP-T16				Not Qualified					YES	e0				2 V	0 ns
AM26LS32AMJ	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR			EIA-422-B; TIA-422-B; EIA-423-B; TIA-423-B; V.10; V.11	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers		4.5 V	2.54 mm	125 Cel	5 V	3-STATE	-55 Cel		TIN LEAD	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	8 Amp	TRUE	4		NO	e0			19.56 mm		35 ns
5962-9163901QEX	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	4	BICMOS	MIL-PRF-38535 Class Q	12 ns	EIA-422-B; TIA-422-B; V.11		STANDARD	5 V	5.5 V			IN-LINE		4.5 V			4.5 V	2.54 mm	125 Cel	5 V		-55 Cel	4	TIN LEAD	DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Qualified					YES	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm
SN75ALS057N-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4	TTL		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	1		DUAL	R-PDIP-T20		5.08 mm	7.62 mm	Not Qualified			1		NO				24.325 mm		18 ns
DS26F31MJ/883	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO		4	BIPOLAR	MIL-STD-883	25 ns	EIA-422; FED STD 1020		STANDARD					IN-LINE						2.54 mm	125 Cel			-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified				LG_MAX; SEATED HGT-NOM	YES				19.94 mm
SN65C1168N-10	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	1	BICMOS		12 ns	V.10; V.11; X.26; X.27; EIA-422-A	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel		3-STATE	-40 Cel	2		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY	2	INDIVIDUAL DRIVER ENABLES	YES				19.305 mm		27 ns
SN75207N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO			BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					16 Amp										35 ns
5962F7802301VEA	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	300k Rad(Si)	CERAMIC, GLASS-SEALED	NO	5.5 V	4		MIL-PRF-38535 Class V	30 ns	EIA-422; FED STD 1020		STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel	4		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified				LG_MAX; SEATED HGT-NOM	YES				19.94 mm
SN65HVD10QPE4	Texas Instruments	LINE TRANSCEIVER	AUTOMOTIVE	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	3.6 V	1	BICMOS		16 ns	EIA-485-A; TIA-485-A; ISO 8482	15.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		IN-LINE	DIP8,.3		Line Driver or Receivers	.0001 Amp	3 V	2.54 mm	125 Cel			-40 Cel	1		DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	8 Amp		1	SIGNALING RATE 32 MBPS	YES		NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	25 ns
SN75175N-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	2						19.305 mm		35 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.