THROUGH-HOLE Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Total Dose (V)	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
5962-01-116-1995	Texas Instruments		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC	NO			BIPOLAR		25 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	125 Cel		3-STATE	-55 Cel	2		DUAL	R-XDIP-T16				Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
SN75207N-01	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	IN-LINE					4.75 V		70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14				Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT							35 ns
SN75143AJP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC	NO			BIPOLAR				35 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14					16 Amp										35 ns
SN75475P	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY	NO			BIPOLAR				50 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T8				Not Qualified	20 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75119PE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	1	BIPOLAR		30 ns	GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	15 Amp		1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN; COMMON I/O	YES	e4			9.81 mm	2 V	75 ns
SN75182N-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	2	BIPOLAR			GENERAL PURPOSE	28 mA	DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		TRUE	1	BUILT-IN LINE TERMINATION; RESPONSE CONTROL					19.305 mm		45 ns
SN75C189AN-10	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	6 V	1	BIPOLAR			EIA-232-D	.7 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.305 mm		6000 ns
SN75C185N	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	6 V	3	BICMOS		3500 ns	EIA-232-F; TIA-232-F; V.28	.75 mA	SCHMITT TRIGGER	5 V	13.2 V	5,+-5/+-12	-12 V	IN-LINE	DIP20,.3	4.5 V	Line Driver or Receivers	.000001 Amp	4.5 V	2.54 mm	70 Cel	12 V	TOTEM-POLE	0 Cel	3	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T20		5.08 mm	7.62 mm	Not Qualified	3.2 Amp	INVERTED	5	ALSO REQUIRES -12V SUPPLY	NO	e4	NOT SPECIFIED	NOT SPECIFIED	25.4 mm	8 V	4000 ns
MAX232N-10	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	1	BICMOS			EIA-232-D	10 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		INVERTED	2	EXTERNAL CHARGE PUMP	NO				19.305 mm
DS14C88N	Texas Instruments	LINE DRIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	12.6 V	4	CMOS		6000 ns	EIA-232-D; V.28		GATED	9 V		+-4.5/+-12	-9 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	75 Cel			0 Cel	4	TIN LEAD	DUAL	R-PDIP-T14	1	5.334 mm	7.62 mm	Not Qualified				1 SINGLE INPUT DRIVER	NO	e0			19.05 mm	6 V	0 ns
SN75124N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO			BIPOLAR				72 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T16					16 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75ALS193NE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR			V.10; V.11; EIA-422-B; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.0004 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	4		NO	e4			19.305 mm		22 ns
SN75164BN-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	22	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	8	TTL		20 ns	IEEE-488		SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	1		DUAL	R-PDIP-T22		5.08 mm	10.16 mm	Not Qualified			1		NO						22 ns
SN75475JG4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		CERAMIC	NO			BIPOLAR				50 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T8					20 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75207JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC	NO			BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14					16 Amp										35 ns
SN75HVD11PE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	3.6 V	1	BICMOS		40 ns	EIA-485-A; TIA-485-A; ISO 8482	15.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V		3.3		IN-LINE	DIP8,.3		Line Driver or Receivers	.0001 Amp	3 V	2.54 mm	70 Cel			0 Cel	1		DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	8 Amp		1	SIGNALING RATE 10 MBPS	YES		NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	70 ns
AM26LS32ACJ-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	4	BIPOLAR			EIA-422-A; EIA-423-A		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	4						19.56 mm		35 ns
SN65HVD05P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	1	BICMOS		11 ns	EIA-485-A; TIA-485-A; ISO 8482E	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP8,.3	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	.1 Amp	COMPLEMENTARY	1	SIGNALING RATE UPTO 40 MBPS	YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	2.5 V	25 ns
5962-9321101MCA	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	15 V	2		MIL-STD-883		GENERAL PURPOSE		DIFFERENTIAL SCHMITT TRIGGER	10 V				IN-LINE					4.5 V		125 Cel			-55 Cel			DUAL	R-GDIP-T14	1			Not Qualified			2								150 ns
SN75124JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC	NO			BIPOLAR				72 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T16					16 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75164BN	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	22	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	8	BIPOLAR		35 ns	IEEE-488		SCHMITT TRIGGER	5 V				IN-LINE					4.75 V		70 Cel			0 Cel	8		DUAL	R-PDIP-T22				Not Qualified			8		NO		NOT SPECIFIED	NOT SPECIFIED			22 ns
SN75151J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR		CERAMIC	NO			TTL		30 ns				5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-XDIP-T20				Not Qualified					YES					2 V
SN75125N	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	7	BIPOLAR			GENERAL PURPOSE	47 mA	STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp		7				NOT SPECIFIED	NOT SPECIFIED	19.305 mm		30 ns
5962-7802006QEX	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR	MIL-PRF-38535 Class Q		EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			IN-LINE		4.5 V			4.5 V	2.54 mm	125 Cel	5 V		-55 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Qualified			1		NO				19.43 mm		35 ns
SN75138J-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	4			24 ns	GENERAL PURPOSE		SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	1		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified			1		NO				19.56 mm		15 ns
SN65C189AN-10	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	6 V	1	BIPOLAR			EIA-232-D	.7 mA	SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.305 mm		6000 ns
SN75155JG-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	15 V	1	BIPOLAR		150 ns	EIA-232-C	14 mA	SCHMITT TRIGGER	12 V			-12 V	IN-LINE					4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	1		DUAL	R-GDIP-T8		5.08 mm	7.62 mm	Not Qualified		INVERTED	1	RESPONSE CONTROL; BUILT IN 5V REGULATOR	NO				9.6 mm		245 ns
SN751730N	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	3	BIPOLAR		18.5 ns	IBM 360/370	80 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel	5 V	OPEN-EMITTER	0 Cel	3	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	.24 Amp	TRUE	3	ADDITIONAL COMMON STROBE INPUT	NO	e4			19.305 mm		19.5 ns
SN75153J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	1	BIPOLAR		30 ns	EIA-422-A; FED STD 1020	80 mA	STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.56 mm		0 ns
5962R7802005QEA	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	100k Rad(Si)	CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR	MIL-PRF-38535 Class Q		EIA-422; EIA-423; FED STD 1020; FED STD 1030		DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	125 Cel			-55 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified			4	LG_MAX; SEATED HGT-NOM	NO				19.94 mm		31 ns
DS26F32MJRQMLV	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	100k Rad(Si)	CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR	MIL-PRF-38535 Class V		EIA-422; EIA-423; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers		4.5 V	2.54 mm	125 Cel	5 V		-55 Cel		TIN LEAD	DUAL	R-GDIP-T16	1	5.08 mm	7.62 mm	Not Qualified	.05 Amp		4	LG_MAX; SEATED HGT-NOM	NO	e0			19.94 mm		31 ns
5962-9318301QPA	Texas Instruments	LINE TRANSCEIVER	MILITARY	THROUGH-HOLE	8	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	1	BICMOS	MIL-PRF-38535 Class Q	31 ns	EIA-485-A; TIA-485-A; ISO 8482	5.4 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	125 Cel	5 V		-55 Cel	1	Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T8		5.08 mm	7.62 mm	Qualified	8 Amp		1	COMMON I/O: TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e0	NOT SPECIFIED	NOT SPECIFIED	9.58 mm	1.1 V	37 ns
SN75189J-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO		1	BIPOLAR			EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				IN-LINE						2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.56 mm		85 ns
SN75HVD08P	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	1	BICMOS		40 ns	EIA-485-A; TIA-485-A; ISO 8482E	16 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	3.3/5		IN-LINE	DIP8,.3	3 V	Line Driver or Receivers	.0001 Amp	3 V	2.54 mm	70 Cel		3-STATE	0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	.1 Amp	TRUE	1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	70 ns
DS8923AN	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	2	BIPOLAR		15 ns	EIA-422; ESDI; ST412; ST506	78 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.5 V	2.54 mm	70 Cel			0 Cel	2	TIN LEAD	DUAL	R-PDIP-T16	1	4.318 mm	7.62 mm	Not Qualified	8 Amp		2	LG_MAX	YES	e0			19.05 mm	2.5 V	20 ns
5962-01-116-6936	Texas Instruments		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC	NO			BIPOLAR	MIL-STD-883 Class B (Modified)	20 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	125 Cel			-55 Cel	2		DUAL	R-XDIP-T16				Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED		1.6 V	0 ns
5962-7900901VCA	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR	MIL-PRF-38535 Class V	16 ns	GENERAL PURPOSE		GATED	5 V	5.5 V	5		IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	.002 Amp	4.5 V	2.54 mm	125 Cel	5 V	TOTEM-POLE	-55 Cel	2	TIN LEAD	DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Qualified	2 Amp	TRUE			YES	e0			19.56 mm		0 ns
P82B96PE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	15 V	2	BIPOLAR			GENERAL PURPOSE	2 mA	STANDARD	5 V		2/15		IN-LINE	DIP8,.3		Other Interface ICs		2 V	2.54 mm	85 Cel			-40 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified			2		NO	e4			9.81 mm		0 ns
SN75ALS193J	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	4	BIPOLAR			V.10; V.11; EIA-422-B; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	4		NO		NOT SPECIFIED	NOT SPECIFIED	19.56 mm		22 ns
5962-9062801RA	Texas Instruments	LINE TRANSCEIVER	MILITARY	THROUGH-HOLE	20	DIP	RECTANGULAR		UNSPECIFIED	NO	5.5 V	1		MIL-STD-883	40 ns	GENERAL PURPOSE		STANDARD	5 V				IN-LINE					4.5 V		125 Cel			-55 Cel	8	TIN LEAD	DUAL	R-XDIP-T20				Not Qualified			8		NO	e0					22 ns
SN75119PP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		PLASTIC/EPOXY	NO			BIPOLAR				60 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel			0 Cel	1		DUAL	R-PDIP-T8					15 Amp				YES					2 V	75 ns
5962-01-214-1651	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO			BIPOLAR		25 ns				5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		CONSTANT-CURRENT	0 Cel	2		DUAL	R-PDIP-T14				Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED			0 ns
SN65LBC176JG-00	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	1	BICMOS		25 ns	EIA-485; ISO 8482	3.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V		85 Cel		3-STATE	-40 Cel	1		DUAL	R-GDIP-T8				Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES						45 ns
SN75107BJ-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC, GLASS-SEALED	NO	5.25 V	1	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V			-5 V	IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified		TRUE	2	ADDITIONAL COMMON STROBE INPUT					19.56 mm		25 ns
SN75108BJ4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		CERAMIC	NO			BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14					16 Amp										25 ns
SN65C1167N-10	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.5 V	1	BICMOS		12 ns	V.10; V.11; X.26; X.27; EIA-422-A	9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.5 V	2.54 mm	85 Cel		3-STATE	-40 Cel	2		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY	2	TRISTATABLE RECEIVERS	YES				19.305 mm		27 ns
SN65LBC180NE4	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	1	BICMOS		18 ns	EIA-485; ISO 8482	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	85 Cel			-40 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified	8 Amp		1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4			19.305 mm	1.1 V	33 ns
SN75LP196N	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR		PLASTIC/EPOXY	NO	5.25 V	3	BIPOLAR		1600 ns	EIA-232-F; TIA-232-F; V.28		SCHMITT TRIGGER	5 V	15 V	5,+-9/+-12	-12 V	IN-LINE	DIP20,.3	9 V	Line Driver or Receivers	.000001 Amp	4.75 V	2.54 mm	70 Cel	12 V		0 Cel	5		DUAL	R-PDIP-T20		5.08 mm	7.62 mm	Not Qualified	2 Amp		3	ALSO REQUIRES -9 TO -15 SUPPLY	NO		NOT SPECIFIED	NOT SPECIFIED	25.4 mm	10 V	900 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.