THROUGH-HOLE Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
5962-8776901EA	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	2	BIPOLAR	MIL-PRF-38535	50 ns	GENERAL PURPOSE		GATED	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	125 Cel		OPEN-EMITTER	-55 Cel	2		DUAL	R-GDIP-T16				Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED		2.4 V	0 ns
5962-8688801CX	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4		MIL-PRF-38535		EIA-232-C		SCHMITT TRIGGER	5 V				IN-LINE					4.5 V		125 Cel			-55 Cel			DUAL	R-GDIP-T14				Not Qualified			4		NO						127 ns
SN75116N-10	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BIPOLAR		30 ns	GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel			0 Cel	1		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY	1	CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES				19.305 mm		75 ns
5962-01-097-5115	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR				26 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14				Not Qualified	10 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75107AJ	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	2	BIPOLAR			GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	2	ADDITIONAL COMMON STROBE INPUT	NO		NOT SPECIFIED	NOT SPECIFIED	19.56 mm		25 ns
SN75177BJG	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR				70 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel			0 Cel	1		DUAL	R-XDIP-T8				Not Qualified	8 Amp				YES					1.5 V	40 ns
UA9639CPE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR			V.10; V.11; EIA-422-B; EIA-423-B	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	20 Amp	TRUE	2		NO	e4			9.81 mm		85 ns
SN75LBC176JG	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1	BICMOS		25 ns	EIA-485; ISO 8482	3.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-GDIP-T8				Not Qualified	8 Amp	COMPLEMENTARY	1	COMMON I/O: TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES		NOT SPECIFIED	NOT SPECIFIED		1.5 V	33 ns
SN75183N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR		18 ns				5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers	.00012 Amp		2.54 mm	70 Cel			0 Cel	2		DUAL	R-PDIP-T14									YES					1.3 V
UA9636ACP/BURNIN	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO					140000 ns				12 V		+-12	-12 V	IN-LINE	DIP8,.3		Line Driver or Receivers	.00001 Amp		2.54 mm	70 Cel			0 Cel	2		DUAL	R-PDIP-T8									NO					8 V
SN75ALS056N-10	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	8	TTL		18 ns	GENERAL PURPOSE		SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	1		DUAL	R-PDIP-T20		5.08 mm	7.62 mm	Not Qualified			1		NO				24.325 mm		18 ns
SN75ALS126J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.95 V	2	BIPOLAR		28 ns	IBM 360/370	47 mA	STANDARD	5 V				IN-LINE					4.5 V	2.54 mm	70 Cel		OPEN-EMITTER	0 Cel	2		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE		INDIVIDUAL FAULT FLAGS	NO				19.56 mm
TRS222CN	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	18	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2			3500 ns	EIA-232-F; TIA-232-F; V.28	10 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP18,.3		Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	70 Cel			0 Cel	2		DUAL	R-PDIP-T18		5.08 mm	7.62 mm	Not Qualified	3.2 Amp		2		NO		NOT SPECIFIED	NOT SPECIFIED	22.48 mm	10 V	1000 ns
5962-9076601VEX	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4				EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			IN-LINE		4.5 V			4.5 V		125 Cel	5 V		-55 Cel			DUAL	R-GDIP-T16				Qualified			4								30 ns
5962-8754701CA	Texas Instruments	LINE DRIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR	MIL-PRF-38535	15 ns	V.35	35 mA	GATED	5 V	5.5 V	+-5	-5 V	IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	125 Cel	5 V	CONSTANT-CURRENT	-55 Cel	2	Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Qualified	.04 Amp	COMPLEMENTARY		HIGH DRIVE	YES	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm	2 V	0 ns
SN75ALS171J	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	3	BIPOLAR		13 ns	EIA-422-B; TIA-422-B; EIA-485; V.11	90 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP20,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	3		DUAL	R-GDIP-T20		5.08 mm	7.62 mm	Not Qualified	8 Amp	TRUE	3	COMMON I/O; ADDITIONAL COMMON ENABLE INPUT	YES		NOT SPECIFIED	NOT SPECIFIED	24.195 mm	1.5 V	19 ns
SN75ALS121N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR		50 ns	GENERAL PURPOSE		GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	2		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED	19.305 mm		0 ns
SN75LBC176P-00	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS		25 ns	EIA-485; ISO 8482	3.9 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	1		DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY	1	TRISTATABLE RECEIVER; COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES				9.81 mm		45 ns
SN75110ANE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR		15 ns	V.35		GATED	5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel		CONSTANT-CURRENT	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified					YES	e4			19.305 mm		0 ns
SN75188N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR		350 ns				9 V		+-9	-9 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00001 Amp		2.54 mm	70 Cel			0 Cel	4		DUAL	R-PDIP-T14									NO					12 V
5962-00-163-5701	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR		15 ns				5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		CONSTANT-CURRENT	0 Cel	2		DUAL	R-XDIP-T14				Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75189ANE4	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	4	BIPOLAR			EIA-232-F; TIA-232-F; V.28	26 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel		NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified	10 Amp	INVERTED	4	RESPONSE CONTROL	NO	e4			19.305 mm		85 ns
SN75142N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				35 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					16 Amp										35 ns
SN75ALS1178N	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR		22 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP16,.3	4.75 V	Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel	5 V	3-STATE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	8 Amp	COMPLEMENTARY	2	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4			19.305 mm	1.5 V	37 ns
SN65LBC184IP	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO		1				EIA-485; ISO 8482		DIFFERENTIAL					IN-LINE						2.54 mm	85 Cel			-40 Cel	1		DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified			1		YES				9.81 mm
5962-01-035-6444	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR		2000 ns				12 V		+-12	-12 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00001 Amp		2.54 mm	70 Cel			0 Cel	2		DUAL	R-PDIP-T14				Not Qualified					NO		NOT SPECIFIED	NOT SPECIFIED		10 V	0 ns
SN75112NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR		15 ns				5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		CONSTANT-CURRENT	0 Cel	2		DUAL	R-PDIP-T14									YES
SN75HVD10P	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	3.6 V	1	BICMOS		16 ns	EIA-485-A; TIA-485-A; ISO 8482	15.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		IN-LINE	DIP8,.3	3 V	Line Driver or Receivers	.0001 Amp	3 V	2.54 mm	70 Cel	3.3 V	3-STATE	0 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	8 Amp	TRUE	1	SIGNALING RATE 32 MBPS	YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	25 ns
SN75115NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				50 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T16					15 Amp										75 ns
DS26LS32ACN	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4				EIA-422; EIA-423; FED STD 1020; FED STD 1030	70 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel			0 Cel		TIN LEAD	DUAL	R-PDIP-T16	1	5.08 mm	7.62 mm	Not Qualified	8 Amp		4		NO	e0			21.755 mm		35 ns
SN75189ANP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				26 mA		5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					10 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
SN65C189AN	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	6 V	1	BIPOLAR			EIA-232-E; V.28	.7 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers		4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel			DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL			NOT SPECIFIED	NOT SPECIFIED	19.305 mm		6000 ns
5962-00-481-9366	Texas Instruments		MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR		15 ns				5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	125 Cel		CONSTANT-CURRENT	-55 Cel	2		DUAL	R-XDIP-T14				Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED			0 ns
SN75174J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1	BIPOLAR		65 ns	V.11; X.27; EIA-422-A; EIA-485	60 mA	STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	2		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.56 mm
TRS202IN	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	2				EIA-232-F; TIA-232-F; V.28	15 mA	SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.0002 Amp	4.5 V	2.54 mm	85 Cel			-40 Cel	2		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	1.6 Amp		2		NO				19.305 mm	10 V	10000 ns
SN75115J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR				50 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T16				Not Qualified	15 Amp										75 ns
SN75117N	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1			30 ns			DIFFERENTIAL	5 V				IN-LINE					4.5 V		70 Cel			0 Cel	1		DUAL	R-PDIP-T8				Not Qualified			1		YES						75 ns
SN75127JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR				47 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T16					16 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
UA9639ACJG-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1	BIPOLAR			EIA-422-A; EIA-423-A; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T8		5.08 mm	7.62 mm	Not Qualified		TRUE	2						9.6 mm		85 ns
5962-9690301QCA	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	2	BIPOLAR	MIL-STD-883 Class Q		GENERAL PURPOSE	30 mA	DIFFERENTIAL	5 V	5.5 V	+-5	-5 V	IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	75 Amp	4.5 V	2.54 mm	125 Cel	5 V		-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Qualified	16 Amp		2	ADDITIONAL COMMON STROBE INPUT	NO	e0	NOT SPECIFIED	NOT SPECIFIED	19.56 mm		25 ns
SN65C188N-10	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	1	BIMOS		3500 ns	EIA-232-D	.16 mA	GATED	12 V			-12 V	IN-LINE					4.5 V	2.54 mm	85 Cel		TOTEM-POLE	-40 Cel	4		DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED		1 SINGLE INPUT DRIVER	NO				19.305 mm
SN75172NE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		65 ns	V.11; EIA-422-B; EIA-485	60 mA	STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES	e4			19.305 mm	1.5 V	0 ns
SN75ALS195J	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	2	BIPOLAR			V.10; V.11; EIA-422-B; EIA-423-A	35 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers		4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified	16 Amp	TRUE	2				NOT SPECIFIED	NOT SPECIFIED	19.56 mm		22 ns
DS26LS33MJ/A+	Texas Instruments		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			TTL						5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	125 Cel			-55 Cel		Tin/Lead (Sn/Pb)	DUAL	R-XDIP-T16					8 Amp					e0					25 ns
SN75ALS174ANE4	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		22 ns	EIA-422-B; TIA-442-B; EIA-485	55 mA	STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES	e4			19.305 mm	1.5 V	0 ns
SN75110AN3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR		15 ns				5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		CONSTANT-CURRENT	0 Cel	2		DUAL	R-PDIP-T14									YES
SN75ALS1178NE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR		22 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	8 Amp	COMPLEMENTARY	2	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4			19.305 mm	1.5 V	37 ns
SN65LBC180N	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS		18 ns	EIA-485; ISO 8482	5 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.25 V	5		IN-LINE	DIP14,.3	4.75 V	Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14	1	5.08 mm	7.62 mm	Not Qualified	8 Amp	COMPLEMENTARY	1	TRISTATABLE RECEIVER; 1 RECEIVER ACTIVE UNDER SHUTDOWN	YES	e4	NOT SPECIFIED	260	19.305 mm	1.1 V	33 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.