THROUGH-HOLE Line Drivers & Receivers 2,400+

Reset All

Part	Manufacturer	Interface IC Type	Temperature Grade	Terminal Form	No. of Terminals	Package Code	Package Shape	Package Body Material	Surface Mount	Maximum Supply Voltage	No. of Functions	Technology	Screening Level	Maximum Transmit Delay	Interface Standard	Maximum Supply Current	Input Characteristics	Nominal Supply Voltage	Maximum Supply Voltage-1	Power Supplies (V)	Nominal Negative Supply Voltage	Package Style (Meter)	Package Equivalence Code	Minimum Supply Voltage-1	Sub-Category	Maximum High Level Input Current	Minimum Supply Voltage	Terminal Pitch	Maximum Operating Temperature	Nominal Supply Voltage-1	Output Characteristics	Minimum Operating Temperature	Driver No. of Bits	Terminal Finish	Terminal Position	JESD-30 Code	Moisture Sensitivity Level (MSL)	Maximum Seated Height	Width	Qualification	Maximum Output Low Current	Output Polarity	Receiver No. of Bits	Additional Features	Differential Output	JESD-609 Code	Maximum Time At Peak Reflow Temperature (s)	Peak Reflow Temperature (C)	Length	Minimum Out Swing	Maximum Receive Delay
SN75HVD08PE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BICMOS		40 ns	EIA-485-A; TIA-485-A; ISO 8482E	16 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		3.3/5		IN-LINE	DIP8,.3		Line Driver or Receivers	.0001 Amp	3 V	2.54 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	8 Amp		1		YES	e4			9.81 mm	1.5 V	70 ns
SN75ALS126NP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			TTL		34 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel			0 Cel	4		DUAL	R-PDIP-T16									NO					2.96 V
SN75172JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR		120 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-XDIP-T16									YES		NOT SPECIFIED	NOT SPECIFIED		1.5 V	0 ns
SN75114N-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR		30 ns	GENERAL PURPOSE	50 mA	GATED	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	1		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY		CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES				19.305 mm		0 ns
SN65LBC172NE4	Texas Instruments	LINE DRIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BICMOS		20 ns	EIA-485		STANDARD	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel	4	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified					YES	e4			19.305 mm	1.1 V	0 ns
SN75114NP1	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR		30 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel			0 Cel	2		DUAL	R-PDIP-T16				Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED		1.55 V	0 ns
SN75115JP4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR				50 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T16					15 Amp										75 ns
SN75111N	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR		15 ns				5 V		+-5	-5 V	IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel		CONSTANT-CURRENT	0 Cel	4		DUAL	R-PDIP-T16				Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED			0 ns
SN65HVD21P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BICMOS		60 ns	EIA-485-A; TIA-485-A	12 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V	5		IN-LINE	DIP8,.4	4.5 V	Line Driver or Receivers	.0001 Amp	4.5 V	2.54 mm	85 Cel	5 V	3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	.1 Amp	TRUE	1		YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.8 V	50 ns
SN75118N	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BIPOLAR		30 ns	GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V	5.5 V	5		IN-LINE	DIP16,.3	4.5 V	Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	70 Cel	5 V		0 Cel	2	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	15 Amp	COMPLEMENTARY	1	TRISTATABLE RECEIVER; CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	2 V	75 ns
SN75ALS192J-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	1	BIPOLAR		14 ns	EIA-422-A		STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.56 mm
SN75LBC180ANE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BICMOS		12 ns	EIA-485-A; TIA-485-A; ISO 8482	15 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP14,.3		Line Driver or Receivers	.0001 Amp	4.75 V	2.54 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified	8 Amp		1		YES	e4			19.305 mm	1.1 V	20 ns
SN75208BN3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					16 Amp										35 ns
SN75ALS199N-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR			V.10; V.11; X.26; X.27		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	2						19.305 mm		22 ns
SN75119JG4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR				60 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel			0 Cel	1		DUAL	R-XDIP-T8					15 Amp				YES					2 V	75 ns
UA9636ACJG-00	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	13.2 V	1	BIPOLAR			EIA-232-C; EIA-423-A; FED STD 1030	18 mA	STANDARD	12 V			-12 V	IN-LINE					10.8 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel	2		DUAL	R-GDIP-T8		5.08 mm	7.62 mm	Not Qualified		INVERTED		PROGRAMMABLE SLEW RATE	NO				9.6 mm		0 ns
AM26LS31CN-10	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	4	BIPOLAR		20 ns	EIA-422-A; FED STD 1020		STANDARD	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES				19.305 mm
SN75125J	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR				47 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T16				Not Qualified	16 Amp										30 ns
SN75ALS162N	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	22	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	8	TTL		20 ns	IEEE-488		SCHMITT TRIGGER	5 V				IN-LINE					4.75 V		70 Cel			0 Cel	8		DUAL	R-PDIP-T22				Not Qualified			8		NO		NOT SPECIFIED	NOT SPECIFIED			10 ns
SN75C198N	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	4	BIMOS		3500 ns	EIA-232-E; TIA-232-E; V.28	.16 mA	GATED	12 V	15 V	+-5/+-12	-12 V	IN-LINE	DIP14,.3	4.5 V	Line Driver or Receivers	.00001 Amp	4.5 V	2.54 mm	70 Cel	12 V	3-STATE	0 Cel	4	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED		2 SINGLE INPUT DRIVERS	NO	e4	NOT SPECIFIED	NOT SPECIFIED	19.305 mm	8 V	0 ns
SN65175N-10	Texas Instruments	LINE RECEIVER	INDUSTRIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	2	BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A; EIA-485		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	85 Cel		3-STATE	-40 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	2						19.305 mm		35 ns
SN75208BJ4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T14					16 Amp										35 ns
5962-00-570-5909	Texas Instruments		MILITARY	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR		15 ns				5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	125 Cel		CONSTANT-CURRENT	-55 Cel	2		DUAL	R-XDIP-T14				Not Qualified					YES		NOT SPECIFIED	NOT SPECIFIED			0 ns
UA9639CP-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR			EIA-422-A; EIA-423-A; FED STD 1020; FED STD 1030	50 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified		TRUE	2						9.81 mm		85 ns
SN75208N3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				30 mA		5 V		+-5	-5 V	IN-LINE	DIP14,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T14					16 Amp										35 ns
AM26LS33ACN3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			TTL				70 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T16					8 Amp						NOT SPECIFIED	NOT SPECIFIED			0 ns
UA9637ACP3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR				50 mA		5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T8					20 Amp										25 ns
SN75189AJ-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	14	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO		1	BIPOLAR			EIA-232-C	26 mA	SCHMITT TRIGGER	5 V				IN-LINE						2.54 mm	70 Cel		TOTEM-POLE	0 Cel			DUAL	R-GDIP-T14		5.08 mm	7.62 mm	Not Qualified		INVERTED	4	RESPONSE CONTROL					19.56 mm		85 ns
5962-9231701MXX	Texas Instruments	LINE TRANSCEIVER	MILITARY	THROUGH-HOLE	28	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	8	BICMOS	MIL-STD-883	13 ns	GENERAL PURPOSE		STANDARD	5 V	5.5 V			IN-LINE		4.5 V			4.5 V		125 Cel	5 V		-55 Cel	1		DUAL	R-GDIP-T28				Not Qualified			1	PACKAGE WITH CERAMIC BODY MATERIAL IS ALSO AVAILABLE	NO						17 ns
5962-9076601VEA	Texas Instruments	LINE RECEIVER	MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.5 V	4	BIPOLAR	MIL-PRF-38535 Class V		EIA-422-A; EIA-423-A; EIA-485	75 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V	5.5 V			IN-LINE		4.5 V			4.5 V	2.54 mm	125 Cel	5 V		-55 Cel		TIN LEAD	DUAL	R-GDIP-T16	1	5.08 mm	7.62 mm	Qualified			4	LG_MAX	NO	e0			19.94 mm		30 ns
SN75146P3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR						5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-PDIP-T8					20 Amp										300 ns
SN75114J	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, GLASS-SEALED	NO	5.25 V	2	BIPOLAR		30 ns	GENERAL PURPOSE		GATED	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel			0 Cel	2		DUAL	R-GDIP-T16		5.08 mm	7.62 mm	Not Qualified				CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES		NOT SPECIFIED	NOT SPECIFIED	19.56 mm	1.55 V	0 ns
SN65ALS1176PE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		15 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27		DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	85 Cel			-25 Cel	1		DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	8 Amp		1		YES		NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	25 ns
SN75061N-10	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1			160 ns	IEEE-802.3		DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	1		DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified			1		YES				19.305 mm		35 ns
SN75163BN	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	8	BIPOLAR		20 ns	GENERAL PURPOSE		SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	8		DUAL	R-PDIP-T20		5.08 mm	7.62 mm	Not Qualified			8		NO		NOT SPECIFIED	NOT SPECIFIED	24.325 mm		22 ns
SN75ALS195J3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			TTL				35 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers			2.54 mm	70 Cel			0 Cel			DUAL	R-XDIP-T16					16 Amp										22 ns
SN75ALS191P	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		7 ns	V.11; EIA-422-B	40 mA	STANDARD	5 V	5.25 V	5		IN-LINE	DIP8,.3	4.75 V	Line Driver or Receivers	.000025 Amp	4.75 V	2.54 mm	70 Cel	5 V	TOTEM-POLE	0 Cel	2	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	5 Amp	COMPLEMENTARY			YES	e4			9.81 mm	2 V	0 ns
SN75ALS126J3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			TTL		34 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel			0 Cel	4		DUAL	R-XDIP-T16									NO					2.96 V
SN751701PE4	Texas Instruments	LINE TRANSCEIVER	OTHER	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	15 V	1	BIPOLAR		480 ns	EIA-232-C; TIA-232-C		SCHMITT TRIGGER	12 V			-12 V	IN-LINE					4.5 V	2.54 mm	85 Cel			-20 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified			1		NO	e4			9.81 mm		240 ns
SN75ALS173N-00	Texas Instruments	LINE RECEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR			V.10; V.11; X.26; X.27; EIA-422-A; EIA-423-A; EIA-485	24 mA	DIFFERENTIAL SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel			DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified		TRUE	4						19.305 mm		27 ns
SN65HVD11P	Texas Instruments	LINE TRANSCEIVER	INDUSTRIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	3.6 V	1	BICMOS		40 ns	EIA-485-A; TIA-485-A; ISO 8482	15.5 mA	DIFFERENTIAL SCHMITT TRIGGER	3.3 V	3.6 V	3.3		IN-LINE	DIP8,.3	3 V	Line Driver or Receivers	.0001 Amp	3 V	2.54 mm	85 Cel		3-STATE	-40 Cel	1	Nickel/Palladium/Gold (Ni/Pd/Au)	DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	8 Amp	COMPLEMENTARY	1	SIGNALING RATE 10 MBPS	YES	e4	NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	70 ns
DS3692J	Texas Instruments	LINE DRIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC, METAL-SEALED COFIRED	NO	5.25 V	2	BIPOLAR		200 ns	GENERAL PURPOSE	30 mA	STANDARD	5 V		+-5	-5 V	IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.75 V	2.54 mm	70 Cel		3-STATE	0 Cel	1	TIN LEAD	DUAL	R-CDIP-T16		5.08 mm	7.62 mm	Not Qualified		COMPLEMENTARY			YES	e0			19.431 mm	2 V	0 ns
5962-01-075-2720	Texas Instruments		MILITARY	THROUGH-HOLE	16	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR				65 mA		5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	125 Cel			-55 Cel	4		DUAL	R-XDIP-T16				Not Qualified	16 Amp				NO		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
SN65ALS1176P	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL EXTENDED	THROUGH-HOLE	8	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	1	BIPOLAR		15 ns	EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27		DIFFERENTIAL SCHMITT TRIGGER	5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00002 Amp	4.75 V	2.54 mm	85 Cel			-25 Cel	1		DUAL	R-PDIP-T8		5.08 mm	7.62 mm	Not Qualified	8 Amp		1		YES		NOT SPECIFIED	NOT SPECIFIED	9.81 mm	1.5 V	25 ns
SN75158JG4	Texas Instruments		COMMERCIAL	THROUGH-HOLE	8	DIP	RECTANGULAR	CERAMIC	NO			BIPOLAR		25 ns				5 V		5		IN-LINE	DIP8,.3		Line Driver or Receivers	.00004 Amp		2.54 mm	70 Cel			0 Cel	2		DUAL	R-XDIP-T8									YES		NOT SPECIFIED	NOT SPECIFIED		2 V	0 ns
SN75116NE4	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.5 V	1	BIPOLAR		30 ns	GENERAL PURPOSE	60 mA	DIFFERENTIAL	5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00004 Amp	4.5 V	2.54 mm	70 Cel			0 Cel	1	NICKEL PALLADIUM GOLD	DUAL	R-PDIP-T16		5.08 mm	7.62 mm	Not Qualified	15 Amp	COMPLEMENTARY	1	1 RECEIVER ACTIVE UNDER SHUTDOWN; CONFIGURABLE TOTEM-POLE OUTPUTS; DIFFERENTIAL OUTPUT PAIRS	YES	e4			19.305 mm	2 V	75 ns
SN75161BN-10	Texas Instruments	LINE TRANSCEIVER	COMMERCIAL	THROUGH-HOLE	20	DIP	RECTANGULAR	PLASTIC/EPOXY	NO	5.25 V	8	TTL		20 ns	IEEE-488		SCHMITT TRIGGER	5 V				IN-LINE					4.75 V	2.54 mm	70 Cel			0 Cel	1		DUAL	R-PDIP-T20		5.08 mm	7.62 mm	Not Qualified			1		NO				24.325 mm		22 ns
SN75174NG3	Texas Instruments		COMMERCIAL	THROUGH-HOLE	16	DIP	RECTANGULAR	PLASTIC/EPOXY	NO			BIPOLAR		120 ns				5 V		5		IN-LINE	DIP16,.3		Line Driver or Receivers	.00002 Amp		2.54 mm	70 Cel		3-STATE	0 Cel	4		DUAL	R-PDIP-T16									YES		NOT SPECIFIED	NOT SPECIFIED		1.5 V	0 ns

Line Drivers & Receivers

Line drivers and receivers are electronic components that are used to transmit and receive data signals over long distances. They are commonly used in industrial and commercial applications that require reliable and high-speed data transmission.

Line drivers are electronic components that amplify signals and provide the necessary voltage and current to drive the transmission line. They are used to ensure that the data signal maintains its integrity and strength as it travels through the transmission line.

Line receivers are electronic components that are used to receive the data signal and convert it back to a usable form. They typically include a differential amplifier and a threshold detector to ensure that the received signal is of sufficient quality and strength to be used by the receiving device.

Line drivers and receivers can be classified into several types based on their specific applications and characteristics. Some of the most common types of line drivers and receivers include RS-232, RS-422, and RS-485.